opensolaris man page for powerman-pdu

POWERMAN-PDU(8) 						    NUT Manual							   POWERMAN-PDU(8)

NAME
       powerman-pdu - Driver for Powerman PDU

SYNOPSIS
       powerman-pdu -h

       powerman-pdu -a PDU_NAME [OPTIONS]

	   Note
	   This man page only documents the hardware-specific features of the powerman-pdu driver. For information about the core driver, see
	   nutupsdrv(8).

SUPPORTED HARDWARE
       This driver supports a wide range of PDUs through the Powerman project.

       This includes various models from APC, Baytech, Cyclades, but also support IPMI and various blade management modules from HP, IBM and Sun.

EXTRA ARGUMENTS
       This driver doesn't support any optional settings.

INSTALLATION
       This driver is not built by default. You can build it by using "configure --with-powerman=yes".

UPS COMMANDS
       The following instant commands (see upscmd(8)) are available for each outlet of the PDU, with X standing for the outlet number:

       outlet.X.load.on
	   Power on the outlet.

       outlet.X.load.off
	   Power off the outlet.

       outlet.X.load.cycle
	   Cycle the outlet (power off then power on, possibly with a delay).

IMPLEMENTATION
       The hostname of the Powerman server is specified using the "port" value in ups.conf, i.e.:

	   [pdu]
		   driver = powerman-pdu
		   port = host.example.com:port

       The port used to reach powermand is optional if the default port is used.

KNOWN ISSUES
       In the current NUT version (2.4.1), ups.status is still exposed, with the value "WAIT". Some other values from the ups collection are also
       exposed.

AUTHOR
       Arnaud Quette <arnaud.quette@gmail.com>

SEE ALSO
   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

       The PowerMan home page: http://powerman.sourceforge.net/

Network UPS Tools						    05/21/2012							   POWERMAN-PDU(8)