opensolaris man page for pcata

pcata(7D)							      Devices								 pcata(7D)

NAME
       pcata - PCMCIA ATA card device driver

SYNOPSIS
       pcata@socket#:a -u

       pcata@socket#:a -u,raw

DESCRIPTION
       The PCMCIA ATA card device driver supports PCMCIA ATA disk and flash cards that follow the following standards:

	   o	  PC card 2.01 compliance (MBR+fdisk table required for all platforms).

	   o	  PC card ATA 2.01 compliance.

	   o	  PC card services 2.1 compliance.

       The  driver  supports  standard PCMCIA ATA cards that contain a Card Information Structure (CIS). For PCMCIA, nodes are created in /devices
       that include the socket number as one component of the device name referred to by the node. However,  the  names  in  /dev,  /dev/dsk,  and
       /dev/rdsk  follow  the current conventions for ATA devices, which do not encode the socket number in any part of the name. For example, you
       may have the following:

       +----------------+-----------------------------------+---------------------+
       |Platform	| /devices name 		    | /dev/dsk name	  |
       +----------------+-----------------------------------+---------------------+
       |x86		| /devices/isa/pcic@1,3e0 /disk@0:a | /dev/dsk/c1d0s0	  |
       +----------------+-----------------------------------+---------------------+
       |SPARC		| /devices/iommu@f,e0000000	    | /dev/dsk/c1d0s0	  |
       |		| /sbus@f,e0001000    /SUNW,   pcm- |			  |
       |		| cia@3,0 /disk@0:a		    |			  |
       +----------------+-----------------------------------+---------------------+

PRECONFIGURATION
       If a PC Card ATA device is recognized, the pcata driver is automatically loaded, IRQs allocated, devices nodes created, and  special  files
       created (if they do not already exist).

   Known Problems and Limitations
	   o	  You need to umount the file system before removing the disk.

	   o	  The ufs file systems on removable media (PC Card ATA) should have one of the onerror={panic, lock, umount} mount options set.

CONFIGURATION
       Configuration topics include initial installation and configuration, identifying an unrecognized device, special files and hot-plugging.

   Initial Installation and Configuration
	   1.	  Install the Solaris software.

	   2.	  Boot the system.

	   3.	  Insert the PC card ATA device.

   Identifying an Unrecognized Device
       If you insert a PC card ATA device and it is not recognized (no special files created), use the prtconf command to identify the problem.

	   1.	  Run  the  prtconf -D command to see if your pcata card is recognized. (A recognized device will appear at the end of the prtconf
		  output. For example:

		    # prtconf -D
		    .  .  .
		    pcic, instance #0 (driver name: pcic)
			.  .  .
		       disk, instance #0

	   2.	  If pcata does not appear in the prtconf output, there is a problem with the PC card adapter configuration or with the  hardware.
		  Check  to  see whether the problem is with the card or the adapter by trying to use the card on another machine and by seeing if
		  it works on the same machine using DOS.

   Special Files
       For PC card devices, nodes are created in /devices that include the socket number as one component of a device name that  the  node  refers
       to.  However,  the  /prtc/dev  names and the names in /dev/dsk and /dev/rdsk do follow the current convention for ATA devices, which do not
       encode the socket number in any part of the name.

   Hot-Plugging
	   o	  If you want to remove the disk, you must unmount the file system.

	   o	  Use the mkfs_pcfs(1M) command to create a pcfs file system:

		    # mkfs -F pcfs /dev/rdsk/c#d#p0:d

	   o	  To mount a pcfs file system, type:

		    # mount -F pcfs /dev/dsk/c#d#p0:c /mnt

	   o	  If you want to create a ufs file system, use the newfs command and type:

		    # newfs /dev/rdsk/c#d#s#

	   o	  To mount a ufs file system, type:

		    # mount -F ufs /dev/dsk/c#d#s# /mnt

	   o	  To create a Solaris partition, run the format command and go to the Partition menu. For more information, see the format(1M) man
		  page.

FILES
       /kernel/drv/pcata    pcata driver

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWpsdpr 		   |
       +-----------------------------+-----------------------------+

SEE ALSO
       format(1M), mount(1M), newfs(1M), pcmcia(7D), attributes(5), pcfs(7FS)

SunOS 5.11							    2 Mar 2007								 pcata(7D)