netbsd man page for irdaattach

IRDAATTACH(8)						    BSD System Manager's Manual 					     IRDAATTACH(8)

NAME
     irdaattach -- attach serial lines to IrDA frame driver

SYNOPSIS
     irdaattach [-d dongle] [-fHhlmnp] ttyname

DESCRIPTION
     irdaattach is used to assign a tty line to an IrDA frame level driver.  The following operands are supported by irdaattach:

     -d dongle	   Sets the dongle type.  The following dongles are supported:

		   none      No dongle

		   tekram    Tekram IR-210B

		   jeteye    Extended Systems JetEye

		   actisys   ACTiSYS IR-220L

		   actisys+  ACTiSYS IR-220L+

		   litelink  Parallax LiteLink

		   girbil    Greenwich GIrBIL

		   The default is none.

     -f 	   Print the name of the IrDA frame device that should be used to access the frames.

     -H 	   Turn on DTR/CTS flow control.  By default, no flow control is done.

     -h 	   Turn on RTS/CTS flow control.  By default, no flow control is done.

     -l 	   Turn on the CLOCAL flag, making it possible to run SLIP on a cable without modem control signals (e.g. DTR, DSR, DCD).

     -m 	   Maintain modem control signals after closing the line.  Specifically, this disables HUPCL.

     -n 	   Do not detach from invoking tty.

     -p 	   Print process id to file.

     ttyname	   Specifies the name of the tty device.  Ttyname should be a string of the form 'ttyXX', or '/dev/ttyXX'.

     Only the super-user may attach a network interface.

     The frame driver is detached by killing the irdaattach process.

EXAMPLES
	   irdaattach tty00
	   ircomm -Y -d `irdaattach -p -f /dev/tty02`

DIAGNOSTICS
     Messages indicating that the specified interface does not exist, the requested address is unknown, or that the user is not privileged but
     tried to alter an interface's configuration.

SEE ALSO
     daemon(3), irframe(4), irframetty(4), slattach(8)

HISTORY
     The irdaattach command appeared in NetBSD 1.6.

BSD
								 December 4, 2001							       BSD