netbsd man page for sane-qcam

sane-qcam(5)						   SANE Scanner Access Now Easy 					      sane-qcam(5)

NAME
       sane-qcam - SANE backend for Connectix QuickCam cameras

DESCRIPTION
       The sane-qcam library implements a SANE (Scanner Access Now Easy) backend that provides access Connectix QuickCam cameras.

DEVICE NAMES
       This backend expects device names of the form:

	      port

       Where  port  is	the I/O port address at which the device resides.  This address is normally specified in hexadecimal using C syntax (e.g.,
       0x37b) and may be prefixed with the letter "u" (e.g., u0x37b) to force the backend to access the camera in uni-directional mode.

CONFIGURATION
       The contents of the qcam.conf file is a list port addresses that may be connected to a Connectix  QuickCam.   Empty  lines  and	everything
       starting from a hash mark (#) up to the end of a line are ignored.  A sample configuration file is shown below:

	      0x37b  # /dev/lp0
	      0x378  # /dev/lp1
	      u0x278 # /dev/lp2 forced in uni-directional mode
	      0x3bc  # /dev/lp0 (alternate address)

       In general, it is safest to list only the port addresses that really correspond to a QuickCam.  For example, if one of the listed addresses
       actually connect to a printer, then starting up this backend will cause the printer to perform a device reset (which is generally  undesir-
       able).

FILES
       /etc/sane.d/qcam.conf
	      The backend configuration file (see also description of SANE_CONFIG_DIR below).

       /usr/lib64/sane/libsane-qcam.a
	      The static library implementing this backend.

       /usr/lib64/sane/libsane-qcam.so
	      The shared library implementing this backend (present on systems that support dynamic loading).

ENVIRONMENT
       SANE_CONFIG_DIR
	      This  environment  variable  specifies the list of directories that may contain the configuration file.  Under UNIX, the directories
	      are separated by a colon (`:'), under OS/2, they are separated by a semi-colon (`;').  If this variable is not set,  the	configura-
	      tion  file is searched in two default directories: first, the current working directory (".") and then in /etc/sane.d.  If the value
	      of the environment variable ends with the directory separator character, then the default directories are searched after the explic-
	      itly  specified  directories.  For example, setting SANE_CONFIG_DIR to "/tmp/config:" would result in directories "tmp/config", ".",
	      and "/etc/sane.d" being searched (in this order).

       SANE_DEBUG_QCAM
	      If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend.   E.g.,
	      a value of 128 requests all debug output to be printed.  Smaller levels reduce verbosity.

AUTHOR
       David Mosberger

BUGS
       Support is currently limited to the color version of the QuickCam.  The black-and-white camera is starting to work too, but I don't believe
       it works in all cases yet.  Reportedly, acquiring images of certain sizes work fine, but others result in shifted  images  (sounds  like  a
       problem due to byte-padding).

       The program needs root-privileges since it needs to be able to access the camera's I/O ports.

SEE ALSO
       sane(7)

								    14 Jul 2008 						      sane-qcam(5)