linux man page for sbp

SBP(4)							   BSD Kernel Interfaces Manual 						    SBP(4)

NAME
     sbp -- Serial Bus Protocol 2 (SBP-2) Mass Storage Devices driver

SYNOPSIS
     kldload firewire
     kldload cam
     kldload sbp

     or

     device sbp
     device firewire
     device scbus
     device da
     device cd
     device pass

DESCRIPTION
     The sbp driver provides support for SBP-2 devices that attach to the FireWire (IEEE 1394) port.  It should work with SBP-2 devices which the
     CAM layer supports, for example, HDDs, CDROM drives and DVD drives.

     Some users familiar with umass(4) might wonder why the device is not detached at the CAM layer when the device is unplugged.  It is detached
     only if the device has not been plugged again during several bus resets.  This is for preventing to detach an active file system even when
     the device cannot be probed correctly for some reason after a bus reset or when the device is temporary disconnected because the user changes
     the bus topology.	If you want to force to detach the device, run ``fwcontrol -r'' several times or set hw.firewire.hold_count=0 by
     sysctl(1).

     Some (broken) HDDs do not work well with tagged queuing.  If you have problems with such drives, try ``camcontrol [device id] tags -N 1'' to
     disable tagged queuing.

SEE ALSO
     cam(4), firewire(4), camcontrol(8), fwcontrol(8), kldload(8), sysctl(8)

AUTHORS
     The sbp driver was written by Katsushi Kobayashi and Hidetoshi Shimokawa.

     This manual page was written by Katsushi Kobayashi.

BSD
								   May 20, 2002 							       BSD