hpux man page for vlan

VLAN(7) 						 Miscellaneous Information Manual						   VLAN(7)

NAME
       VLAN - virtual local area network

DESCRIPTION
       This manpage provides a brief overview of VLAN (virtual LAN) technology.

       VLANs  are logical, or network segments that can span multiple physical network segments.  A primary benefit of VLANs is that they can iso-
       late broadcast and multicast traffic by determining which destinations should receive that traffic, thereby making better use of switch and
       end-station resources.

       Logical	separation  using  VLAN allows for the logical grouping of PCs, servers and other network resources to behave as if they were con-
       nected to the same, physical segment, even if they are not.

       HP-UX VLAN is an implementation of IEEE 802.1p/Q standards.

       VLAN interfaces can be configured in HP-UX servers using the command (see nwmgr_vlan(1M)) or (see lanadmin_vlan(1M)).  HP  recommends  that
       you  use  for  HP-UX Release 11i Version 3 and forward.	Interfaces can also be configured using the web-based management tool HP-UX System
       Management Homepage (HP SMH).

       Each VLAN interface created is assigned a VLAN PPA (VPPA) that is unique across the system and a VLAN ID, that identifies the  virtual  LAN
       it is part of.  The VLAN ID is unique on the interface on which the VLAN interface is created.

WARNINGS
       The  and  commands are deprecated.  These commands will be removed in a future HP-UX release.  HP recommends the use of replacement command
       nwmgr(1M) to perform all network interface-related tasks.

SEE ALSO
       lanadmin(1M), lanadmin_vlan(1M), lanscan(1M), nwmgr(1M), nwmgr_vlan(1M), smh(1M).

       IEEE 802.1p, IEEE 802.1Q

																	   VLAN(7)