hpux man page for uvscom

UVSCOM(4)						   BSD Kernel Interfaces Manual 						 UVSCOM(4)

NAME

     uvscom -- USB support for SUNTAC Slipper U VS-10U serial adapters driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device uvscom
	   device ucom

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   uvscom_load="YES"

HARDWARE

     The uvscom driver supports the following adapters:

     o	 DDI Pocket Air H" C@rd
     o	 DDI Pocket Air H" C@rd 64
     o	 NTT P-in
     o	 NTT P-in m@ster

DESCRIPTION

     The uvscom driver provides support for the SUNTAC Slipper U VS-10U chip.  Slipper U is a PC Card to USB converter for data communication card
     adapters.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The uvscom driver first appeared in FreeBSD and later in NetBSD 1.6.  This manual page was adopted from NetBSD by Tom Rhodes
     <trhodes@FreeBSD.org> in April 2002.

BSD
								 November 22, 2006							       BSD