hpux man page for top

top(1)							      General Commands Manual							    top(1)

NAME
       top - display and update information about the top processes on the system

SYNOPSIS
       time] count] number] filename] pset_id]

DESCRIPTION
       displays the top processes on the system and periodically updates the information.  Raw CPU percentage is used to rank the processes.

   Options
       recognizes the following command-line options:

	      Set the delay between screen updates to
			  time seconds.  The default delay between updates is 5 seconds.

	      Show only   count  displays,  then exit.	A display is considered to be one update of the screen.  This option is used to select the
			  number of displays to be shown before the program exits.

	      This option runs the
			  program at the same priority as if it is executed via a command so that it will execute faster (see nice(1)).  This  can
			  be  very  useful  in discovering any system problem when the system is very sluggish.  This option is accessible only to
			  users who have appropriate privileges.

	      User ID (uid) numbers are displayed instead of usernames.
			  This improves execution speed by eliminating the additional time required to map uid numbers to user names.

	      Hides the individual CPU state information for systems
			  having multiple processors.  Only the average CPU status will be displayed.

	      Show only   number processes per screen.	Note that, if number is greater than the maximum number of processes that can be displayed
			  per  screen,	this  option  is ignored.  But when used with option, there is no limit on the maximum number of processes
			  that can be displayed.

	      Output is appended to
			  filename.  When is used, defaults to 1 for and 16 for

	      Show load averages and process state break down for system
			  and processor set pset_id.  Show only the processes running on the processor set pset_id.  This option is supported only
			  if the kernel supports processor sets functionality.

	      Adds column PSET	before	column	CPU for individual CPU information.  Adds columns PSET before column CPU for each process informa-
			  tion.  This option is supported only if the kernel supports processor sets functionality.

	      Show individual CPU information.
			  By default, does not display any individual CPU information.	The user can toggle between individual process information
			  and  individual  CPU	information  by using the screen-control key.  When used with the option, the option overrides the
			  option.

   Screen-Control Commands
       When displaying multiple-screen data, recognizes the following keyboard screen-control commands:

	      Display next screen if the current screen is not the last screen.

	      Display previous screen if the current screen is not the first screen.

	      Display the first (top) screen.

	      Display individual CPU information in place of individual process
			  information and vice versa.

   Program Termination
       To exit the program and resume normal user activities, type at any time.

   Display Description
       Three general classes of information are displayed by

	      The first few lines at the top of the display
		   show general information about the state of the system, including:

			o  System name and current time.

			o  Load averages in the last one, five, and fifteen minutes of all the active processors in the system.

			o  Number of existing processes and the number of processes in each state (sleeping, waiting, running,	starting,  zombie,
			   and stopped).

			o  Percentage  of  time spent in each of the processor states (user, nice, system, idle, interrupt and swapper) per active
			   processor on the system.

			o  Average value for each of the active processor states (only on multi-processor systems).

	      Reports virtual and real memory used by user processes
		   (with the amount of memory considered "active" in parentheses) and the amount of free memory.

	      Information about individual processes on the system.
		   When process data cannot fit on a single screen, divides the data into two or more screens.	To view multiple-screen data,  use
		   the	and commands described previously.  Note that the system- and memory-data displays are present in each screen of multiple-
		   screen process data.

		   Process data is displayed in a format similar to that used by

			Processor number on which the process is executing
				    (only on multi-processor systems).

			Terminal interface used by the process.

			Process ID number.

			ID of the processor set to which the processor belongs.
				    This is shown only when option is used.

			Name of the owner of the process.
				    When the option is specified, the user ID (uid) is displayed instead of

			Current priority of the process.

			Nice value ranging from -20 to +20.

			Total virtual size of the process in kilobytes.
				    This includes virtual sizes of text, data, stack, mmap regions, shared memory regions and IO  mapped  regions.
				    This may also include virtual memory regions shared with other processes.

			Resident size of the process in kilobytes.
				    It	includes  the  sizes of all private regions in the process.  The resident size information is, at best, an
				    approximate value.

			Current state of the process.
				    The various states are or

			Number of system and CPU seconds the process has consumed.

			Weighted CPU (central processing unit) percentage.

			Raw CPU percentage.
				    This field is used to sort the top processes.

			Name of the command the process is currently running.

EXAMPLES
       can be executed with or without command-line options.

       To display five screens of data at two-second intervals then automatically exit, use:

       To display information about pset 2, use:

       To display individual CPU information in place of individual process information, use:

	      and press the key.

AUTHOR
       was developed by HP and William LeFebvre of Rice University.

																	    top(1)