debian man page for cwdaemon

CWDAEMON(8)						      System Manager's Manual						       CWDAEMON(8)

NAME
       cwdaemon - morse daemon for the serial or parallel port

SYNOPSIS
       cwdaemon [options] ...

DESCRIPTION
       Cwdaemon  is  a small daemon which uses the pc parallel or serial port and a simple transistor switch to output morse code to a transmitter
       from a text message sent to it via udp port 6789.

OPTIONS
       -d <device> Use a different device for keying.

       -h Show summary of options.

       -n Do not fork and print debug information to stdout.

       -p <port> Use a different UDP port number (default = 6789).

       -P <priority> Set cwdaemon priority, -20 to 20 (default = 0).

       -s <speed> Set speed, value larger than 4 (default = 24).

       -t <time> Set PTT delay, value from 0 to 50 ms (default = 0).

       -v <volume> Set volume for soundcard output.

       -V Output version information and exit.

       -w <weight> Set weighting, value from -50 to 50 (default = 0).

       -x <sdevice> Set sound device to be used.

DEVICES
       Any serial device that supports getting and setting the modem control lines can be used.  On Linux, ttyS0, ttyS1, etc. will work.  On Free-
       BSD  these devices are known as ttyd0, ttyd1, etc.  On OpenBSD, these same devices are known as tty00, tty01, etc., but may vary with plat-
       form.

       For parallel ports on Linux try parport0 (default) or parport1, and on FreeBSD, ppi0 (default), ppi1, etc.  OpenBSD does not support paral-
       lel port operation, and defaults to 'tty00'.

       For completeness, a 'null' device is provided.  This device does exactly nothing (no rig keying, no ssb keying, etc.).

SOUND DEVICES
       Sdevice should be one of 'c' (console), 's' (soundcard), 'b' (both), or 'n' (none).  The default is console, which is the PC speaker.

SEE ALSO
       The provided README in /usr/share/cwdaemon for a description of the circuitry, usage and testing of cwdaemon.

AUTHOR
       Cwdaemon  was  written by Joop Stakenborg <pg4i at amsat.org>, Rein Couperus <pa0r at amsat.org>, Wolf-Ruediger Juergens, DL2WRJ <WJuergens
       at t-online.de> and Ladislav Vaiz, OK1ZIA <ok1zia at nagano.cz>. Cwlib is taken and adapted from the unixcw package, version 2.2  by  Simon
       Baldwin, G0FRD.	FreeBSD support mostly done by Diane Bruce, VA3DB.  OpenBSD support by Jason L. Wright, AI4JW.

       Code maintainer for cwdaemon is Joop, pg4i at amsat.org.

																       CWDAEMON(8)