debian man page for astribank_allow

ASTRIBANK_ALLOW(8)														ASTRIBANK_ALLOW(8)

NAME
       astribank_allow - License Xorcom Astribank (xpp) capabilities.

SYNOPSIS
       astribank_allow -D device-path [ options ]

       astribank_allow [-h]

DESCRIPTION
       Modern Astribanks (with USB product id's 116x) contain capabilities that may be licensed.

       astribank_allow is used to upload/download the licensing information to/from the device.

       Uploading  a  valid license file to an Astribank, changes its capabilities.  The change becomes effective after a firmware reset (either by
       powering the device off and on again, or via the astribank_tool full reset option).

       Downloading license from the device, produces a valid license file for its current capabilities. This may be backed up, so the  device  may
       be later restored to its previous capabilities.

       The  license file contains both a human readable description of the device capabilities for the end user and a hash of the licensing infor-
       mation used by Xorcom to generate/modify licensed capabilities.

OPTIONS
       -D device-path
	      Required. The device to read from/write to. This is bus_num/device_num, where bus_num and device_num are the first  two  numbers	in
	      the output of lsusb(8) or dahdi_hardware(8).  On older versions of this toolyou needed a complete path to the device, which would be
	      /dev/bus/usb/bus_num/device_num, or /proc/bus/usb/bus_num/device_num.

       -w
	      Write capabilities to EEPROM, otherwise read capabilities

       -f filename
	      License filename (stdin/stdout if not specified)

       -v
	      Increase verbosity. May be used multiple times.

       -d mask
	      Set debug mask to mask. Default is 0, 0xFF is "everything".

       -h
	      Displays usage message.

SEE ALSO
       fxload(8), lsusb(8), astribank_hexload(8), astribank_tool(8)

AUTHOR
       Alex Landau

								   29 March 2009						ASTRIBANK_ALLOW(8)