SND_MSS(4) BSD Kernel Interfaces Manual SND_MSS(4)
NAME
snd_mss -- Microsoft Sound System ISA PnP/non-PnP bridge device driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device sound
device snd_mss
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
snd_mss_load="YES"
Non-PnP cards require the following lines in device.hints(5):
hint.pcm.0.at="isa"
hint.pcm.0.irq="10"
hint.pcm.0.drq="1"
hint.pcm.0.flags="0x0"
DESCRIPTION
The snd_mss bridge driver allows the generic audio driver, sound(4), to attach to the supported audio devices.
HARDWARE
The snd_mss driver supports the following audio devices:
o AD1845
o AD1848
o Aztech 2320
o CMedia CMI8330
o Crystal Semiconductor CS4231
o Crystal Semiconductor CS4232
o Crystal Semiconductor CS4234
o Crystal Semiconductor CS4235
o Crystal Semiconductor CS4236
o Crystal Semiconductor CS4237
o ENSONIQ SoundscapeVIVO ENS4081
o NeoMagic 256AV (non-AC97)
o OPTi 924
o OPTi 925
o OPTi 930
o OPTi 931
o OPTi 933
o Yamaha OPL-SA2
o Yamaha OPL-SA3
SEE ALSO
sound(4)
HISTORY
The snd_mss device driver first appeared in FreeBSD 2.2.6.
AUTHORS
This manual page was written by Joel Dahl <joel@FreeBSD.org>.
BSD
December 1, 2005 BSD
