debian man page for config::model::models::lcdd::picolcd

Config::Model::models::LCDd::picolcd(3pm)		User Contributed Perl Documentation		 Config::Model::models::LCDd::picolcd(3pm)

NAME
       Config::Model::models::LCDd::picolcd - Configuration class LCDd::picolcd

VERSION
       version 2.021

DESCRIPTION
       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements
   KeyTimeout
       KeyTimeout is the time in ms that LCDd spends waiting for a key press before cycling through other duties.  Higher values make LCDd use
       less CPU time and make key presses more detectable.  Lower values make LCDd more responsive but a little prone to missing key presses.  500
       (.5 second) is the default and a balanced value. Optional. Type integer. upstream_default: '500'.

   Backlight
       Sets the initial state of the backlight upon start-up.Optional. Type enum. choice: 'on', 'off'. upstream_default: 'on'.

   Brightness
       Set the initial brightness . Works only with the 20x4 device. Optional. Type integer. upstream_default: '1000'.

   OffBrightness
       Set the brightness while the backlight is 'off' .  Works only with the 20x4 device.Optional. Type integer. upstream_default: '0'.

   Contrast
       Set the initial contrast Optional. Type integer. upstream_default: '1000'.

   Keylights
       Light the keys? Optional. Type enum. choice: 'on', 'off'. upstream_default: 'on'.

   Key0Light
       If Keylights is on, the you can unlight specific keys below: Key0 is the directional pad.  Key1 - Key5 correspond to the F1 - F5 keys.
       There is no LED for the +/- keys.  This is a handy way to indicate to users which keys are disabled.  Optional. Type enum. choice: 'on',
       'off'. upstream_default: 'on'.

   Key1Light
       Optional. Type uniline. default: 'on'.

   Key2Light
       Optional. Type uniline. default: 'on'.

   Key3Light
       Optional. Type uniline. default: 'on'.

   Key4Light
       Optional. Type uniline. default: 'on'.

   Key5Light
       Optional. Type uniline. default: 'on'.

   LircHost
       Host name or IP address of the LIRC instance that is to receive IR codes If not set, or set to an empty value, IR support is
       disabled.Optional. Type uniline. default: '127.0.0.1'.

   LircPort
       UDP port on which LIRC is listening Optional. Type integer. upstream_default: '8765'.

   LircFlushThreshold
       Threshold in jiffies of synthesized gap that triggers flushing the IR data to lirc 100 means 6.1ms. legal: 16 - 32767; Use 0 to
       disable.Optional. Type integer. upstream_default: '100'.

SEE ALSO
       o   cme

perl v5.14.2							    2012-11-09				 Config::Model::models::LCDd::picolcd(3pm)