debian man page for config::model::models::lcdd::cwlnx

Config::Model::models::LCDd::CwLnx(3pm) 		User Contributed Perl Documentation		   Config::Model::models::LCDd::CwLnx(3pm)

NAME
       Config::Model::models::LCDd::CwLnx - Configuration class LCDd::CwLnx

VERSION
       version 2.021

DESCRIPTION
       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements
   Model
       Select the LCD model Optional. Type enum. choice: '12232', '12832', '1602'. upstream_default: '12232'.

   Device
       Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

   Size
       Select the LCD size. Default depends on model: 12232: 20x4 12832: 21x4 1602: 16x2. Optional. Type uniline. default: '20x4'.

   Speed
       Set the communication speed Optional. Type enum. choice: '9600', '19200'. upstream_default: '19200'.

   Reboot
       Reinitialize the LCD's BIOS normally you shouldn't need this. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

   Keypad
       If you have a keypad connected. Keypad layout is currently not configureable from the config file.Optional. Type uniline. default: 'yes'.

   keypad_test_mode
       If you have a non-standard keypad you can associate any keystrings to keys.  There are 6 input keys in the CwLnx hardware that generate
       characters from 'A' to 'F'.

       The following is the built-in default mapping hardcoded in the driver.  You can leave those unchanged if you have a standard keypad.  You
       can change it if you want to report other keystrings or have a non standard keypad.  KeyMap_A=Up KeyMap_B=Down KeyMap_C=Left KeyMap_D=Right
       KeyMap_E=Enter KeyMap_F=Escape keypad_test_mode permits one to test keypad assignment Default value is no. Optional. Type uniline. default:
       'yes'.

SEE ALSO
       o   cme

perl v5.14.2							    2012-11-09				   Config::Model::models::LCDd::CwLnx(3pm)