debian man page for flow-send

flow-send(1)						      General Commands Manual						      flow-send(1)

NAME
       flow-send -- Transmit flow data with the NetFlow protocol.

SYNOPSIS
       flow-send [-h]  [-d debug_level]  [-m privacy_mask]  [-s]  [-x xmit_delay]  [-V pdu_version] localip/remoteip/port

DESCRIPTION
       The flow-send utility is used to transmit flows in NetFlow format to a collector specified by localip/remoteip/port.

OPTIONS
       -d debug_level
		 Enable debugging.

       -h	 Display help.

       -s	 Enable spoofing of source IP address.

       -m privacy_mask
		 Apply	privacy_mask to the source and destination IP address of flows.  For example a privacy_mask of 255.255.255.0 would convert
		 flows with source/destination IP addresses 10.1.1.1 and 10.2.2.2 to 10.1.1.0 and 10.2.2.0 respectively.

       -V pdu_version
		 Use pdu_version format when transmitting.

	   1	NetFlow version 1 (No sequence numbers, AS, or mask)
	   5	NetFlow version 5
	   6	NetFlow version 6 (5+ Encapsulation size)
	   7	NetFlow version 7 (Catalyst switches)
	   8.1	NetFlow AS Aggregation
	   8.2	NetFlow Proto Port Aggregation
	   8.3	NetFlow Source Prefix Aggregation
	   8.4	NetFlow Destination Prefix Aggregation
	   8.5	NetFlow Prefix Aggregation
	   8.6	NetFlow Destination (Catalyst switches)
	   8.7	NetFlow Source Destination (Catalyst switches)
	   8.8	NetFlow Full Flow (Catalyst switches)
	   8.9	NetFlow ToS AS Aggregation
	   8.10 NetFlow ToS Proto Port Aggregation
	   8.11 NetFlow ToS Source Prefix Aggregation
	   8.12 NetFlow ToS Destination Prefix Aggregation
	   8.13 NetFlow ToS Prefix Aggregation
	   8.14 NetFlow ToS Prefix Port Aggregation
	   1005 Flow-Tools tagged version 5

       -x xmit_delay
		 Configure a microsecond transmit delay between packets.  This may be necessary in some configurations to prevent a transmit  buf-
		 fer overrun.

EXAMPLES
       Transmit all flows in the directory /flows/krc4 to the collector at 10.0.0.1 listening on port 9500.

	 flow-cat /flows/krc4 | flow-send 0/10.0.0.1/9500

       Generate a test pattern of version 7 flows and send them to a collector at 10.0.0.1 listening on port 9500.

	 flow-gen -V7 | flow-send 0/10.0.0.1/9500

BUGS
       It is not currently possible to convert between the aggregated formats (8.x) and the non aggregated formats (1,5,6,7).

AUTHOR
       Mark Fullmer maf@splintered.net

SEE ALSO
       flow-tools(1)

																      flow-send(1)