debian man page for align_image_stack

ALIGN_IMAGE_STACK(1)						       HUGIN						      ALIGN_IMAGE_STACK(1)

NAME
       align_image_stack - Align overlapping images for HDR or focus stack creation

SYNOPSIS
       align_image_stack [options] input files

DESCRIPTION
       align_image_stack is used for the alignment of slightly misaligned images or for the registration of a stereo images pair.  When several
       differently exposed images are taken in the process of creating a High Dynamic Range image, the images are not perfectly aligned, and the
       quality of the HDR image created will suffer from this.	align_image_stack uses the tools available to hugin to optimize the roll, pitch
       and yaw, as well as some parameters of the lens geometry, to align the images.

OPTIONS
       Modes of operation:

       -p file
	   Output .pto file (useful for debugging, or further refinement)

       -a prefix
	   Output aligned images as prefix_xxxx.tif

       -o output
	   Align images and merge them to HDR, generate output.hdr

       Modifiers:

       -v  Verbose, print progress messages. Repeat for higher verbosity

       -e  Assume input images are full frame fish eye (default: rectilinear)

       -t num
	   Remove all control points with an error higher than num pixels (default: 3)

       -f HFOV
	   Approximate horizontal field of view of input images, use if EXIF info not complete

       -m  Optimize field of view for all images, except for first. Useful for aligning focus stacks with slightly different magnification.

       -d  Optimize radial distortion for all images, except for first.

       -i  Optimize image center shift for all images, except for first.

       -S  Assume stereo images - allow horizontal shift of control points.

       -A  Align stereo window - assumes -S

       -P  Align stereo window with pop-out effect - assumes -S

       -C  Auto crop the image to the area covered by all images

       -c num
	   Number of control points (per grid) to create between adjacent images (default: 8)

       -l  Assume linear input files

       -s scale
	   Scale down image by 2^scale (default: 1 [2x down-sampling])

       -g gsize
	   Break image into a rectangular grid (gsize x gsize) and attempt to find num control points in each section (default: 5 [5x5 grid])

       -h  Display help summary.

AUTHORS
       Written by Pablo d'Angelo. Also contains contributions from Douglas Wilkins, Ippei Ukai, Ed Halley, Bruno Postle, Gerry Patterson and Brent
       Townshend.  Stereo functionality added by Vladimir Nadvornik.

       This man page was written by Cyril Brulebois <cyril.brulebois@enst-bretagne.fr> and is licensed under the same terms as the hugin package
       itself.

"Version: 2011.4.0"						    2011-12-02						      ALIGN_IMAGE_STACK(1)