debian man page for 6tunnel

6TUNNEL(1)						      General Commands Manual							6TUNNEL(1)

NAME
       6tunnel - tunnelling for application that don't speak IPv6

SYNOPSIS
       6tunnel	[  -146dhfv  ]	[  -u  username  ]  [ -i password ] [ -I password ] [ -l local_host ] [ -L limit ] [ -p pid_file ] [ -m map_file ]
       local_port remote_host [ remote_port ]

DESCRIPTION
       6tunnel allows you to use services provided by IPv6 hosts with IPv4-only applications and vice-versa. It can  bind  to  any  of	your  IPv4
       (default) or IPv6 addresses and forward all data to IPv4 or IPv6 (default) host. For example

	      6tunnel -1 6668 irc6.net 6667

       will be enough to connect to IPv6 irc server with

	      irc foobar localhost:6668

       If  you	don't  wish  to run 6tunnel every time you want to show your :c001: or :dead: IPv6 address on IRC, you can use -i parameter, which
       makes 6tunnel ask your client for specified password. Just run

	      6tunnel -i dupa.8 31337 irc6.net 6667

       and then type

	      irc foobar localhost:31337:dupa.8

       If your IRC server requires you to send password, specify it with -I parameter -- after successful proxy authentication 6tunnel	will  send
       it to the server.

       6tunnel can also be used as a tunnel for all other combinations of IPv4 and IPv6 endpoints. If remote host doesn't have any IPv6 addresses,
       6tunnel will use the IPv4 one. In other cases, use -4 parameter which makes IPv4 address the preffered one. For IPv6-to-any tunnels use	-6
       which makes 6tunnel bind to IPv6 address.

OPTIONS
       -1     Exit after first connection.

       -4     Preffer IPv4 endpoint if the machine has both address types.

       -6     Listen on IPv6 address (IPv4 is default).

       -d     Don't detach.

       -f     Force tunneling even if remote host is not resolvable at the execution time.

       -h     Print hex dump of every packet received or sent (hu-huh, Beavis, he said hex dump!)

       -u username
	      Change UID and GID after bind().

       -i password
	      Act as an IRC proxy and require user to authenticate.

       -I password
	      If you are using 6tunnel as an IRC proxy and the IRC server requires you to send password, place it right here.

       -l local_host
	      Listen on specified address (IPv4, or IPv6 if -6 used).

       -L limit
	      Limit simultaneous connections.

       -p pid_file
	      Write down pid to specified file.

       -s source_host
	      Connect to the remote host using specified source address.

       -m map_file
	      Binds  to  specified IPv6 addresses on basis of source IPv4 address. The file contains one mapping per line with IPv4 source address
	      and corresponding IPv6 address. Only listed hosts are allowed to connect. If you want to allow any host, add mapping for default	or
	      0.0.0.0 address. Example:

	      192.168.0.2 3ffe:8010:18::1000:2
	      192.168.0.3 3ffe:8010:18::1000:3

       -v     Be verbose and don't detach.

SIGNALS
       Sending SIGHUP forces map file reload.

THANKS
       #ipv6 crew, Lam.

BUGS
       Terrible  man  page. Hex dump doesn't include IRC proxy authentication.	IRC proxy requires your client to send password first (don't worry
       ircii, EPIC, BitchX, mIRC and many more will work). No logging except debug output.

AUTHORS
       Wojtek Kaniewski (wojtekka@toxygen.net), Dariusz Jackowski (ascent@linux.pl), Ramunas Lukosevicus (lukoramu@parok.lt)

SEE ALSO
       ssh(1)

								   Aug 18, 2005 							6TUNNEL(1)