victronups(8) [xfree86 man page]

VICTRONUPS(8)							    NUT Manual							     VICTRONUPS(8)

NAME

       victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

NOTE

       This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see
       nutupsdrv(8).

SUPPORTED HARDWARE

       The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the
       NetUps line.

       The Match Lite line may only report a handful of variables. This is usually not a bug - they just don't support anything else.

CABLING

       If your Victron cable is broken or missing, use this diagram to build a clone:

       docs/cables/victron.txt

EXTRA ARGUMENTS

       This driver supports the following optional setting in the ups.conf(5):

       modelname=name
	   Set model name

       usd=delay
	   Set delay before shutdown on UPS

BUGS

       The protocol for this UPS is not officially documented.

AUTHOR

       Radek Benedikt <benedikt@lphard.cz>, Daniel Prynych <Daniel.Prynych@hornet.cz>

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012							     VICTRONUPS(8)

VICTRONUPS(8)							    NUT Manual							     VICTRONUPS(8)

NAME

       victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

NOTE

       This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see
       nutupsdrv(8).

SUPPORTED HARDWARE

       The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the
       NetUps line.

       The Match Lite line may only report a handful of variables. This is usually not a bug - they just don't support anything else.

CABLING

       If your Victron cable is broken or missing, use this diagram to build a clone:

       docs/cables/victron.txt

EXTRA ARGUMENTS

       This driver supports the following optional setting in the ups.conf(5):

       modelname=name
	   Set model name

       usd=delay
	   Set delay before shutdown on UPS

BUGS

       The protocol for this UPS is not officially documented.

AUTHOR

       Radek Benedikt <benedikt@lphard.cz>, Daniel Prynych <Daniel.Prynych@hornet.cz>

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012							     VICTRONUPS(8)