BESTUFERRUPS(8) NUT Manual BESTUFERRUPS(8)NAME
bestuferrups - Driver for Best Power Micro-Ferrups
NOTE
This man page only documents the hardware-specific features of the bestuferrups driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
Best Power Micro-Ferrups ME3100, probably other similar models too.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
AUTHORS
Andreas Wrede, John Stone (bestuferrups)
Grant Taylor (bestfort)
Russell Kroll (bestups)
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 BESTUFERRUPS(8)
Check Out this Related Man Page
LIEBERT(8) NUT Manual LIEBERT(8)NAME
liebert - Driver for Liebert contact-closure UPS equipment
NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)
There is no xorg.conf file and no XF86Config file on a certain FreeBSD machine:
# locate xorg.conf
/usr/local/man/man5/xorg.conf.5.gz
# locate XF86Config
#
Can someone let me know if that means that there is a bare bones set up possible only? xrandr works fine, but I am looking for ways to... (6 Replies)
I'm looking for finer granularity than the 20 ANSI escape sequence screen modes. What I'd like to do is have the terminal increase it's own height when I have to show the user a long menu.
Platform is Cygwin 64 running over Win 7 Pro.
Mike (4 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
Look this very good rendering on Slackware 14.2
in my opinion is near perfect.
https://i.stack.imgur.com/q5trL.png
Now look the same page on Fedora 30
https://i.stack.imgur.com/FBQv7.png
In my opinion the fonts on Fedora are too small and difficult to read, I prefer the fat fonts of... (20 Replies)