ADDPART(8) System Administration ADDPART(8)NAME
addpart - tell the kernel about the existence of a partition
SYNOPSIS
addpart device partition start length
DESCRIPTION
addpart tells the Linux kernel about the existence of the specified partition. The command is a simple wrapper around the "add partition"
ioctl.
This command doesn't manipulate partitions on a block device.
PARAMETERS
device The disk device.
partition
The partition number.
start The beginning of the partition (in 512-byte sectors).
length The length of the partition (in 512-byte sectors).
SEE ALSOdelpart(8), fdisk(8), parted(8), partprobe(8), partx(8)AVAILABILITY
The addpart command is part of the util-linux package and is available from https://www.kernel.org/pub/linux/utils/util-linux/.
util-linux January 2015 ADDPART(8)
Check Out this Related Man Page
PARTX(8) System Administration PARTX(8)NAME
partx - tell the Linux kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-s|-u] [-t TYPE] [-n M:N] [-] disk
partx [-a|-d|-s|-u] [-t TYPE] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its contents. It optionally adds or removes partitions.
The disk argument is optional when a partition argument is provided. To force scanning a partition as if it were a whole disk (for example
to list nested subpartitions), use the argument "-". For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than a partition.
The partx is not an fdisk program -- adding and removing partitions does not change the disk, it just tells the kernel about the presence
and numbering of on-disk partitions.
OPTIONS -a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the SIZE column in bytes rather than in human-readable format.
-d, --delete
Delete the specified partitions or all partitions.
-u, --update
Update the specified partitions.
-g, --noheadings
Do not print a header line.
-h, --help
Print a help text and exit.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format is DEPRECATED in favour of --show. Do not
use it in newly written scripts.
-o, --output list
Define the output columns to use for --show and --raw output. If no output arrangement is specified, then a default set is used.
Use --help to get list of all supported columns. This option cannot be combined with --add, --delete or --list options.
-P, --pairs
Output using key="value" format.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format M-N is supported. The range may contain negative num-
bers, for example --nr :-1 means the last partition, and --nr -2:-1 means the last two partitions. Supported range specifications
are:
M Specifies just one partition (e.g. --nr 3).
M: Specifies lower limit only (e.g. --nr 2:).
:N Specifies upper limit only (e.g. --nr :4).
M:N or
M-N Specifies lower and upper limits (e.g. --nr 2:4).
-r, --raw
Use the raw output format.
-s, --show
List the partitions. All numbers (except SIZE) are in 512-byte sectors. The output columns can be rearranged with the --output
option.
-t, --type type
Specify the partition table type aix, bsd, dos, gpt, mac, minix, sgi, solaris_x86, sun, ultrix or unixware.
-v, --verbose
Verbose mode.
EXAMPLES
partx --show /dev/sdb3
partx --show --nr 3 /dev/sdb
partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 5 /dev/sdb
Prints the start sector of partition 5 on /dev/sdb without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
SEE ALSO addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)AUTHORS
Davidlohr Bueso <dave@gnu.org>
Karel Zak <kzak@redhat.com>
The original version was written by Andries E. Brouwer <aeb@cwi.nl>.
ENVIRONMENT
LIBBLKID_DEBUG=0xffff
enables debug output.
AVAILABILITY
The partx command is part of the util-linux package and is available from Linux Kernel Archive <ftp://ftp.kernel.org/pub/linux/utils/util-
linux/>.
util-linux June 2012 PARTX(8)