UBSA(4) BSD Kernel Interfaces Manual UBSA(4)NAME
ubsa -- USB support for Belkin serial adapters
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device ubsa
device ucom
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
ubsa_load="YES"
DESCRIPTION
The ubsa driver provides support for the USB-to-RS232 Bridge chip used by a variety of serial adapters from Belkin and other vendors.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
The ubsa driver supports the following adapters:
o AnyData ADU-500A EV-DO modem
o AnyData ADU-E100A (no EV-DO mode support)
o Belkin F5U103
o Belkin F5U120
o e-Tek Labs Kwik232
o GoHubs GoCOM232
o Peracom single port serial adapter
SEE ALSO tty(4), ucom(4), usb(4)HISTORY
The ubsa driver appeared in FreeBSD 5.0. The uplcom(4) manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002
and modified for the ubsa driver by Alexander Kabaev <kan@FreeBSD.org> in October 2002.
AUTHORS
The ubsa driver was written by Alexander Kabaev <kan@FreeBSD.org>.
BSD March 28, 2008 BSD
Check Out this Related Man Page
UBSA(4) BSD Kernel Interfaces Manual UBSA(4)NAME
ubsa -- USB support for Belkin serial adapters
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device ubsa
device ucom
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
ubsa_load="YES"
DESCRIPTION
The ubsa driver provides support for the USB-to-RS232 Bridge chip used by a variety of serial adapters from Belkin and other vendors.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
The ubsa driver supports the following adapters:
o AnyData ADU-500A EV-DO modem
o AnyData ADU-E100A (no EV-DO mode support)
o Belkin F5U103
o Belkin F5U120
o e-Tek Labs Kwik232
o GoHubs GoCOM232
o Peracom single port serial adapter
SEE ALSO tty(4), ucom(4), usb(4)HISTORY
The ubsa driver appeared in FreeBSD 5.0. The uplcom(4) manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002
and modified for the ubsa driver by Alexander Kabaev <kan@FreeBSD.org> in October 2002.
AUTHORS
The ubsa driver was written by Alexander Kabaev <kan@FreeBSD.org>.
BSD March 28, 2008 BSD
Help, suspect hacked via serial or electric! any ideas on error "Pid:1, comm:swapper Tainted:G W 2.6.35-22 generic #33 -unbutu device = "(null)" or unknown-blocklist(8.1) please append a correct "root"boot option Available partitions 0b00 1048575 sr0 driver:sr 0800 488386584 sda driver:sd. Thanks... (3 Replies)
Hi. I have been running OpenBSD(4.9) and it recognizes my Belkin wireless adapter and I don't have issues with it very often. I prefer FreeBSD over OpenBSD, but FreeBSD(7.4) doesnt recognize my USB wifi card. Under OpenBSD ifconfig shows my card as rsu0 so I tried adding the following to... (1 Reply)
Regarding carrier detection on FreeBSD 9.1 being run within Virtual Box:
I used a usb-serial dongle which shows up as ttyu0 on the BSD machine. Carrier detection appears to work. When I establish a null modem connection I receive a login prompt. If I login, and then unplug and plug back the... (2 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)