js_x(4) [xfree86 man page]

JS_X(4) 						     Kernel Interfaces Manual							   JS_X(4)

NAME

       js_x - JamStudio input driver

SYNOPSIS

       Section "InputDevice"
	 Identifier "devname"
	 Driver "js_x"
	 Option "Device"   "devpath"
	 Option "MaxX"	"int"
	 Option "MaxY"	"int"
	 Option "MinX"	"int"
	 Option "MinY"	"int"
	 Option "PressMax"  "int"
	 Option "PressMin"  "int"
	 Option "PressDiv"  "int"
       EndSection

DESCRIPTION

       js_x is an XFree86 input driver for JamStudio devices.

       The js_x driver functions as a pointer input device, and may be used as the X server's core pointer.

SUPPORTED HARDWARE

       This driver supports the KB-Gear JamStudio pentablet.  This X-Input driver should work on any OS supporting the hiddev raw USB HID driver.

CONFIGURATION DETAILS

       Please refer to XF86Config(5) for general configuration details and for options that can be used with all input drivers.  This section only
       covers configuration details specific to this driver.

	       Option "Device" "path"
		   sets the path to the raw HID device to which the tablet was assigned.  This option is mandatory.

	       Option "MinX" "int"

	       Option "MaxX" "int"

	       Option "MinY" "int"

	       Option "MaxY" "int"
		   sets the minimum and maximum values returned for the absolute X,Y axis of the pen tablet. These values default to 0-8000 for  X
		   and 0-6000 for Y. It should generally be safe to leave these values untouched.

	       Option "PressMin "int"

	       Option "PressMax "int"
		   sets the minimum and maximum values returned for the pressure sensitive tip. These values default to 0-127. It should generally
		   be safe to leave these values untouched.

	       Option "PressDiv" "int"
		   sets the divider for the returned pressure value. This option will allow you to return a smaller set of values for the pressure
		   sensitive tip allowing for finer control. The returned value is computed as follows:

		   X / PressDiv = returned value
			  where X equals the value read from the tablet.

SEE ALSO

       XFree86(1), XF86Config(5), xf86config(1), Xserver(1), X(7).

AUTHORS

       Brian Goines <bgoines78@comcast.net>

XFree86 							   Version 4.7.0							   JS_X(4)

Check Out this Related Man Page

TEK4957(4)						     Kernel Interfaces Manual							TEK4957(4)

NAME

       tek4957 - Tektronix 4957 input driver

SYNOPSIS

       Section "InputDevice"
	 Identifier "idevname"
	 Driver "tek4957"
	 Option "Device"   "devpath"
	 ...
       EndSection

DESCRIPTION

       tek4957 is an XFree86 input driver for the Tektronix 4957 tablet.

       The tek4957 driver functions as a pointer input device, and may be used as the X server's core pointer.

CONFIGURATION DETAILS

       Please refer to XF86Config(5) for general configuration details and for options that can be used with all input drivers.  This section only
       covers configuration details specific to this driver.

	       Option "Device" "devpath"
		   sets the path to the special file which represents serial line where the tablet  is	plugged,  for  example	/dev/ttyS0.   This
		   option is mandatory.

	       Option "DeviceName" "name"
		   sets the name of the X device.

	       Option "Speed" "number"
		   sets the sampling rate, from 1 to 6.  Default is 6, maximum speed.

	       Option "Resolution" "number"
		   sets the resolution.
		       0 : 2340 dots  : 1/200 inch
		       1 : 2972 dots  : 1/10 mm
		       2 : 11700 dots : 1/1000 inch
		       3 : 11887 dots : 1/40 mm
		       4 : 5850 dots  : 1/500 inch
		       5 : 5944 dots  : 1/20 mm : default
		       6 : 4680 dots  : 1/400 inch
		       7 : 1170 dots  : 1/100 inch
		       8 : 12 dots    : 1 inch
		       9 : 24 dots    : 1/2 inch

	       Option "TopX" "number"
		   X coordinate of the top corner of the active zone. ( Default = 0 )

	       Option "TopY" "number"
		   Y coordinate of the top corner of the active zone. ( Default = 0 )

	       Option "BottomX" "Inumber"
		   X coordinate of the bottom corner of the active zone. ( Default = full scale )

	       Option "BottomY" "number"
		   Y coordinate of the bottom corner of the active zone. ( Default = full scale )

BUGS 
/ LIMITATIONS
       Currently, only "Absolute" mode is supported ( Sorry )

SEE ALSO

       XFree86(1), XF86Config(5), xf86config(1), Xserver(1), X(7).

AUTHORS

       Olivier DANET <odanet@caramail.com>

XFree86 							   Version 4.7.0							TEK4957(4)

Linux and UNIX Man Pages

js_x(4) [xfree86 man page]

Check Out this Related Man Page