AIC(4) BSD/i386 Kernel Interfaces Manual AIC(4)NAME
aic -- Adaptec AIC-6260 and AIC-6360 SCSI driver
SYNOPSIS
device aic
In /boot/device.hints:
hint.aic.0.at="isa"
DESCRIPTION
The aic driver provides support for the Adaptec AIC-6260 and AIC-6360 SCSI controller chips. Many systems that use these controller chips do
not have a boot ROM and therefore cannot be booted from.
HARDWARE
The adapters supported by the aic driver include:
o Adaptec AHA-1505 (ISA)
o Adaptec AHA-1510A, AHA-1510B (ISA)
o Adaptec AHA-1520A, AHA-1520B (ISA)
o Adaptec AHA-1522A, AHA-1522B (ISA)
o Adaptec AHA-1535 (ISA)
o Creative Labs SoundBlaster SCSI host adapter (ISA)
o Adaptec AHA-1460, AHA-1460B, AHA-1460C, AHA-1460D (PC Card)
o Adaptec AHA-1030B, AHA-1030P (PC98)
o NEC PC-9801-100 (PC98)
SEE ALSO aha(4), ahb(4), ahc(4), cd(4), ch(4), da(4), intro(4), sa(4)BUGS
The driver does not work well with multiple devices on the SCSI bus. The driver works well with devices like CDROMs and Tape drives. The
driver works not so well with disk drives. The PC Card version appears to work better than the ISA version, but that may be due to differing
levels of testing of the devices.
BSD November 8, 2003 BSD
Check Out this Related Man Page
AIC(4) BSD/i386 Kernel Interfaces Manual AIC(4)NAME
aic -- Adaptec AIC-6260 and AIC-6360 SCSI driver
SYNOPSIS
device aic
In /boot/device.hints:
hint.aic.0.at="isa"
DESCRIPTION
The aic driver provides support for the Adaptec AIC-6260 and AIC-6360 SCSI controller chips. Many systems that use these controller chips do
not have a boot ROM and therefore cannot be booted from.
HARDWARE
The adapters supported by the aic driver include:
o Adaptec AHA-1505 (ISA)
o Adaptec AHA-1510A, AHA-1510B (ISA)
o Adaptec AHA-1520A, AHA-1520B (ISA)
o Adaptec AHA-1522A, AHA-1522B (ISA)
o Adaptec AHA-1535 (ISA)
o Creative Labs SoundBlaster SCSI host adapter (ISA)
o Adaptec AHA-1460, AHA-1460B, AHA-1460C, AHA-1460D (PC Card)
o Adaptec AHA-1030B, AHA-1030P (PC98)
o NEC PC-9801-100 (PC98)
SEE ALSO aha(4), ahb(4), ahc(4), cd(4), ch(4), da(4), intro(4), sa(4)BUGS
The driver does not work well with multiple devices on the SCSI bus. The driver works well with devices like CDROMs and Tape drives. The
driver works not so well with disk drives. The PC Card version appears to work better than the ISA version, but that may be due to differing
levels of testing of the devices.
BSD November 8, 2003 BSD
I am in need some some simple... straight forward instructions for creating file systems on AIX.
I have a raid controller and 4 18.2gb Hot Swap SCSI drives.
I am sooooo confused about Volume Groups, Physical Volume, and Physical Partition, and Logical Volume and Logical Partitions.
In a... (1 Reply)
Everytime I boot up I get the following error message:
NOTICE: bad total free block count on Adaptec 294x/394x PCI SCSI Adapter <aha294x> DISK Target 0, LUN 0 partition 1
Then it asks me if I require a dump to be saved and I reply : NO
Once responded the next error message is :
... (5 Replies)
I am in my second semester of my IT major and have recently set up a dual boot computer running XP pro and openSuSE 10.2. I am 100% New to unix/linux. Here is what I am looking to do:
1.) CompSci, and IT students are allowed to map to a network drive from their computers. I have done so on... (4 Replies)
I am installing SCO UNIX 5.0.6 in X3400, every thing are install except Adaptec 29320ALP Card (Attached DAT Drive) because their driver are available in btld formate Fllopy DISk and SCO Unix 5.0.6 not support USB Floppy, Can anybody inform us any other method to installed the Adaptec Ultra 120... (3 Replies)
we are installing Openserver 5.0.7, system have SAS controller (Hard Disk Attached) as well as Adaptec ultra 320 controller (Tape Drive Attached).
At the time of installation we link both driver BTLD
Boot: Defbootstr link=accraid ad320
Aftes succesfully installation of accraid btld... (6 Replies)
Hi All,
Need some help.............
I have a Solaris 10 installed on x86 PC.
I need some help on how to configure my HP Q1553A tape drive StorageWorks DAT 40
It is connected via Adaptec PCI SCSI card.
I tried to check the drive using commands
Command Output
ls... (1 Reply)
I am actually trying to find out the following:
Using MS Windows, XP PRO, I downloaded an Adaptec SCSi 39160 driver from SCO Unix site.
Driver is ad160.btld.
I now need to copy this driver to a SCO Unix 5.5 standalone server, via a floppy diskette.
I've tried SCO505 Diskimage and it didn't have... (2 Replies)
Hey everyone.
I am trying to set up four sun servers. They all came with an adaptec storagetek raid liveCD. On the liveCD there is a utility called "Arcconf" which is supposed to be used to configure the storage arrays. The example given in their documentation uses this as an example:
ARCCONF... (2 Replies)
I recently got a Sun Sparc 10 Ultra with Solaris 10 installed on it. Now I'm trying to connect my SCSI Jaz drive to it. I moved my Adaptec AHA-2940U PCI SCSI card from my XP PC (where it was working OK) to the Sun and that's about as far as I got.
I did a probe-scsi-all and got nothing back,... (0 Replies)
Has anyone here used eSATA drives on SCO UNIX OpenServer 5.0.7? SCSI host adapters and drives are getting harder to find, so I'm thinking about eventually switching to eSATA, but only, of course, if they will work with OpenServer. (2 Replies)