install_scripts(1M) System Administration Commands install_scripts(1M)
NAME
install_scripts, add_install_client, add_to_install_server, rm_install_client, setup_install_server, check - scripts used to install the
Solaris software
SYNOPSIS
media-mnt-pt/Solaris_XX/Tools/add_install_client [-i IP_address] [-e Ethernet_address] [ -s server_name : path] [ -c server_name : path] [
-n [server ] : name_service [ ( netmask]] [ -p server_name : path] [-t install_boot_image_path] host_name platform_group
media-mnt-pt/Solaris_XX/Tools/add_install_client -d [-s server_name:path] [-c server_name:path] [-p server_name:path] [-t
install_boot_image_path] [-f boot_file_name] platform_name platform_group
media-mnt-pt/Solaris_XX/Tools/add_install_client -d [-s server_name:path] [-c server_name:path] [-p server_name:path] [-t
install_boot_image_path] [-f boot_file_name] -e Ethernet_address [-b property=value] platform_group
media-mnt-pt/Solaris_XX/Tools/add_to_install_server [-s] [-p product_image_path] install_server_path
media-mnt-pt/Solaris_XX/Tools/jumpstart_sample/check [-p install_dir_path] [-r rulesfile]
media-mnt-pt/Solaris_XX/Tools/rm_install_client host_name
media-mnt-pt/Solaris_XX/Tools/rm_install_client platform_name
media-mnt-pt/Solaris_XX/Tools/rm_install_client -e Ethernet_address
media-mnt-pt/Solaris_XX/Tools/rm_install_client -f boot_file_name
media-mnt-pt/Solaris_XX/Tools/setup_install_server [-b] [-t install_boot_image_path] [-w wanboot_image_path] install_dir_path
DESCRIPTION
These commands are located on slice 0 of the Solaris Software and Solaris Installer CDs or DVDs. (The terms "CD" and "DVD" are hereafter
referred to as "installation media".) If the Solaris installation media has been copied to a local disk, media_mnt_pt is the path to the
copied Solaris installation media. They can be used for a variety of installation tasks.
The XX in Solaris_XX is the version number of the Solaris release being used.
There are three versions of the add_install_client command. See SYNOPSIS.
Use the following version of the add_install_client command to add clients for network installation (these commands update the boot-
params(4) file). The add_install_client command must be run from the install server's Solaris installation image (a mounted Solaris instal-
lation media or a Solaris installation media copied to disk) or the boot server's boot directory (if a boot server is required). The
Solaris installation image or the boot directory must be the same Solaris release that you want installed on the client.
media-mnt-pt/Solaris_XX/Tools/add_install_client [-i IP_address] [-e Ethernet_address] [ -s server_name : path] [ -c server_name : path] [
-n [server ] : name_service [ ( netmask]] [ -p server_name : path] [-t install_boot_image_path] host_name platform_group
Use the following version of the add_install_client command to add support for instances of a platform within a platform group to the
install server. This group is booted and configured using DHCP. The script performs the necessary configuration steps on the server, and
prints the data that the user needs to add to the DHCP server for the group.
media-mnt-pt/Solaris_XX/Tools/add_install_client -d [-s server:path] [-c server:path] [-p server:path] [-t install boot image path] [-t
install_boot_image_path] [-f boot file name] platform_name platform_group
Use the following version of the add_install_client command to add a single client to the install server. This client is booted and config-
ured using DHCP. The script performs the necessary configuration steps on the server, and prints the data that the user needs to add to the
DHCP server for the client. The -f flag used above needs to be added to the existing usage as well. -f allows the user to specify a boot
file name to be used for a given client.
media-mnt-pt/Solaris_XX/Tools/add_install_client -d [-s server_name:path] [-c server_name:path] [-p server_name:path] [-t
install_boot_image_path] [-f boot_file_name] -e Ethernet_address platform_group [-b property=value] platform_group
Always use the -d option when registering x86 Architecture Pre-boot eXecution Environment (PXE) clients. These clients use DHCP for their
configuration.
Use add_to_install_server to merge other Solaris installation media with an existing image on a Net Install Server. Each installation media
that can be merged (each OS CD or DVD, and the Language CD or DVD) has its own add_to_install_server script. Do not use
add_to_install_server scripts with installation media other than the ones with which they were delivered.
Use check to validate the rules in a rules file (this is only necessary if a custom JumpStart installation is being set up).
Use rm_install_client to remove clients for network installation (these commands update the bootparams(4) file).
Use setup_install_server to copy the Solaris installation media to a disk (to set up an install server), to build a WANboot miniroot image
(to set up a WANboot install server), or to copy just the boot software of the Solaris installation media to a disk (to set up a boot
server). An install server is required to install clients over the network. A boot server is also required for network installations if
the install server and clients to be installed are on different subnets (the boot server must be located on the client's subnet).
OPTIONS
The add_install_client supports the following options:
-b property=value
Set a property value in the client specific bootenv.rc file located on the boot server's TFTP directory, /tftpboot by default. Use this
option to set boot properties that are specific to this client. You can use the bootpath property to automate the selection of the boot
device instead of manually using the Device Configuration Assistant. You can use the boot-args property to automatically select a jump-
start installation. See eeprom(1M).
You can only use this option to the x86 client. You should only use this option in conjunction with the -d and -e options.
-c server_name:path
This option is required only to specify a JumpStart directory for a custom JumpStart installation. server_name is the host name of the
server with a JumpStart directory. path is the absolute path to the JumpStart directory.
-d
Specify as a DHCP client.
-e Ethernet_address
Specify the Ethernet address of the system to be installed.
-f
Specify the boot_file_name of the client to be installed.
-i IP_address
Specify the IP address of the client to be installed.
-n [server]:name_service[(netmask)]
This option specifies which name service should be used during system configuration. This sets the ns keyword in the bootparams(4)
file.
name_service
Valid entries are nis, nisplus, and none.
netmask
A series of four numbers separated by periods, specifying which portion of an IP address is the network part, and which is the host
part.
server
The name of the server or IP address of the specified name service. If the server specified is on a different subnet, then the net-
mask may be needed to enable the client to contact the server.
-p server_name:path
This option is the location of the user-defined sysidcfg file for pre-configuring system or network information. server_name is either
a valid host name or IP address. path is the absolute path to the Jumpstart directory.
-s server_name:path
This option is required only when using add_install_client from a boot server. Specify the name of the server and the absolute path of
the Solaris installation image that is used for this installation. path is either the path to a mounted Solaris installation media or a
path to a directory with a copy of the Solaris installation media.
-t
Allows you to specify an alternate miniroot
The add_to_install_server command supports the following options:
-p
Specifies the location of the installation media (containing the supplemental products) to be copied.
-s
Allows users to select from a list only the products needing installation.
The check command supports the following options:
-p install_dir_path
Validates the rules file by using the check script from a specified Solaris installation image, instead of the check script from the
system you are using. install_dir_path is the path to a Solaris installation image on a local disk or a mounted Solaris installation
media.
Use this option to run the most recent version of check if your system is running a previous version of Solaris.
-r rulesfile
Specifies a rules file other than the one named rules. Using this option, the validity of a rule can be tested before integrating it
into the rules file. check reports whether or not the rule is valid, but it does not create the rules.ok file necessary for a custom
JumpStart installation.
The rm_install_client command supports the following options:
-e Ethernet_address
Specify the Ethernet address of the system to be removed.
-f
Specify the boot_file_name of the client to be removed.
The setup_install_server command supports the following options:
-b
This option sets up the server only as a boot server.
-t
This option allows an alternate miniroot to be specified.
-w
This option builds a WANboot miniroot image.
OPERANDS
The add_install_client command supports the following operands:
host_name
This is the name of the client to be installed.
platform_group
Vendor-defined grouping of hardware platforms for the purpose of distributing specific software. Examples of valid platform groups are:
+-----------------------------+-----------------------------+
| System | Platform Group |
|x86 |i86pc |
|Sun Fire 4800 |sun4u |
+-----------------------------+-----------------------------+
Use the uname(1) command (with the -m option) to determine a system's platform group.
platform_name
Use the uname(1) command (with the -i option) to determine a system's platform name.
The following example shows the use of the uname command to determine the system platform name for an Ultra 10:
uname -i
The system responds with:
SUNW,Ultra-5_10
Therefore, the system's platform name is SUNW,Ultra-5_10.
The following command calls add_install_client for Ultra 10s:
add_install_client -d SUNW,Ultra-5_10 sun4u
For IA32 platforms, the platform name is always SUNW.i86pc.
The following command calls add_install_client for IA32 platforms:
add_install_client -d SUNW.i86pc i86pc
install_boot_image_path
Pathname of alternate miniroot, specified with -t option.
The rm_install_client command supports the following operands:
host_name
Name of the client to be removed.
platform_name
The platform name of the client to be removed. See the description of this operand above.
Ethernet_address
Ethernet address of the client to be removed.
boot_file_name
Name of the boot file to be removed.
The setup_install_server command supports the following operands:
install_dir_path
The absolute path of the directory in which the Solaris software is to be copied. The directory must be empty.
wanboot_image_path
The absolute path of the directory in which the file containing the WANboot miniroot image is to be created.
install_boot_image_path
Pathname of alternate miniroot, specified with -t option.
EXAMPLES
Example 1: Using add_install_client
The following add_install_client commands add clients for network installation from a mounted Solaris installation media on an install
server on Solaris 9:
example# cd /cdrom/cdrom0/s0/Solaris_9/Tools
example# ./add_install_client system_2/sun4u
Example 2: Using add_install_client
The following add_install_client commands add clients for network installation from a mounted Solaris installation media on an install
server. The -c option specifies a server and path to a JumpStart directory that has a rules file and a profile file for performing a custom
JumpStart installation. Also, the Solaris installation media has been copied to the /export/install directory on Solaris 9:
example# cd /export/install/Solaris_9/Tools
example# /add_install_client -c install_server:/jumpstart system_1 i86pc
example# ./add_install_client -c install_server:/jumpstart system_2 i86pc
Example 3: Using add_install_client
The following add_install_client command adds support for a specific sun4u platform machine (8:0:20:99:88:77) using the boot file:
sun4u.solaris8.
example# add_install_client -d -f sun4u.solaris8 -e 8:0:20:99:88:77 sun4u
Example 4: Using add_install_client
The following add_install_client command adds x86 clients that use the PXE standard for network booting:
example# add_install_client -d -s svrname:/mnt/export/root SUNW.i86pc i86p
Example 5: Using add_to_install_server
The following add_to_install_server command copies the packages in all the installation media's products directories to an existing install
server on Solaris 9:
example# cd /cdrom/cdrom0/s0
example# ./add_to_install_server /export/Solaris_9
Example 6: Using check
The following check command validates the syntax of the rules file used for a custom JumpStart installation:
example# cd jumpstart_dir_path
example# ./check -p /cdrom/cdrom0/s0
Example 7: Using rm_install_client
The following rm_install_client commands remove clients for network installation on Solaris 9:
example# cd /export/install/Solaris_9/Tools
example# ./rm_install_client holmes
example# ./rm_install_client watson
Example 8: Using setup_install_server
The following setup_install_server command copies the mounted Solaris installation media to a directory named /export/install on the local
disk on Solaris 9:
example# cd /cdrom/cdrom0/s0/Solaris_9/Tools
example# ./setup_install_server /export/install
Example 9: Using setup_install_server
The following setup_install_server command copies the boot software of a mounted Solaris installation media to a directory named /boot_dir
on a system that is going to be a boot server for a subnet on Solaris 9:
example# cd /cdrom/cdrom0/s0/Solaris_9/Tools
example# ./setup_install_server -b /boot_dir
Example 10: Using setup_install_server
By default, setup_install_server looks for an installation boot directory at the Solaris ../Tools/Boot location of the mount Solaris dis-
tribution disc.
If an alternate boot directory is required, such as one saved on a network boot server by way of an earlier ./setup_install_server -b
/boot_dir command, the -t option can be used.
example# cd /cdrom/cdrom0/s0/Solairs_9/Tools
example# ./setup_install_server -t /boot_dir /export/install
Example 11: Using setup_install_server with WANboot Option
The following setup_install_server command creates an image of the WANboot miniroot file systemand stores it in the file /wanboot_dir/mini-
root.
example# cd /cdrom/cdrom0/s0/Solairs_9/Tools
example# ./setup_install_server -w /wanboot_dir /export/install
Example 12: x86: Specifying a Serial Console to Use During a Network Installation (from Installation Media)
The following example illustrates how to add an x86 install client to an install server and specify a serial console to use during the
installation. This example sets up the install client in the following manner:
o The -d option indicates that the client is set up to use DHCP to set installation parameters.
o The -e option indicates that this installation occurs only on the client with the ethernet address 00:07:e9:04:4a:bf.
o The first and second uses of the -b option instruct the installation program to use the serial port ttya as an input and an output
device.
install server# cd /export/boot/Solaris_9/Tools
install server# ./add_install_client -d -e "00:07:e9:04:4a:bf"
-b "input-device=ttya" -b "output-device=ttya"
i86pc
For a complete description of the boot property variables and values you can use with the -b option, see eeprom(1M).
Example 13: Specifying a Boot Device to Use During a Network Installation (from Installation Media)
The following example illustrates how to add an x86 install client to an install server and specify a boot device to use during the instal-
lation. If you specify the boot device when you set up the install client, you are not prompted for this information by the Device Configu-
ration Assistant during the installation.
This example sets up the install client in the following manner:
o The -d option indicates that the client is set up to use DHCP to set installation parameters
o The -e option indicates that this installation occurs only on the client with the ethernet address 00:07:e9:04:4a:bf.
o The first and second uses of the -b option instruct the installation program to use the serial port ttya as an input and an output
device.
o The third use of the -b option instructs the installation program to use a specific boot device during the installation.
o The value of the boot device path varies based on your hardware..
o
The i86pc platform name indicates that the client is an x86-based system.
install server# cd /export/boot/Solaris_9/Tools
install server# ./add_install_client -d -e "00:07:e9:04:4a:bf"
-b "input-device=ttya" -b "output-device=ttya"
-b "bootpath=/pci@0,0/pci108e,16a8@8" i86pc
For a complete description of the boot property variables and values you can use with the -b option, see eeprom(1M).
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 An error has occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+--------------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+--------------------------------+
|Availability |Solaris CD (Installation Media) |
+-----------------------------+--------------------------------+
SEE ALSO
uname(1), eeprom(1M), bootparams(4), attributes(5)
Solaris 10 Installation Guide: Basic Installations
SunOS 5.10 9 Sep 2004 install_scripts(1M)