Xdmx(1) General Commands Manual Xdmx(1)
NAME
Xdmx - Distributed Multi-head X server
SYNOPSIS
Xdmx [:display] [option ...]
DESCRIPTION
Xdmx is a proxy X server that uses one or more other X servers as its display devices. It provides multi-head X functionality for displays
that might be located on different machines. Xdmx functions as a front-end X server that acts as a proxy to a set of back-end X servers.
All of the visible rendering is passed to the back-end X servers. Clients connect to the Xdmx front-end, and everything appears as it
would in a regular multi-head configuration. If Xinerama is enabled (e.g., with +xinerama on the command line), the clients see a single
large screen.
Xdmx communicates to the back-end X servers using the standard X11 protocol, and standard and/or commonly available X server extensions.
OPTIONS
In addition to the normal X server options described in the Xserver(1) manual page, Xdmx accepts the following command line switches:
-display display-name
This specifies the name(s) of the back-end X server display(s) to connect to. This option may be specified multiple times to con-
nect to more than one back-end display. The first is used as screen 0, the second as screen 1, etc. If this option is omitted,
the $DISPLAY environment variable is used as the single back-end X server display.
-xinput input-source
This specifies the source to use for XInput extension devices. The choices are the same as for -input , described below, except
that core devices on backend servers cannot be treated as XInput extension devices. (Although extension devices on backend and
console servers are supported as extension devices under Xdmx).
-input input-source
This specifies the source to use for the core input devices. The choices are:
dummy
A set of dummy core input drivers are used. These never generate any input events.
local
The raw keyboard and pointer from the local computer are used. A comma-separated list of driver names can be appended. For
example, to select the example Linux keyboard and PS/2 mouse driver use: -input local,kbd,ps2. The following drivers have been
implemented for Linux: kbd, ms (a two-button Microsoft mouse driver), ps2 (a PS/2 mouse driver), usb-mou (a USB mouse driver),
usb-kbd (a USB keyboard driver), and usb-oth (a USB non-keyboard, non-mouse driver). Additional drivers may be implemented in
the future. Appropriate defaults will be used if no comma-separated list is provided.
display-name
If the display-name is a back-end server, then core input events are taken from the server specified. Otherwise, a console
window will be opened on the specified display.
If the display-name is followed by ",xi" then XInput extension devices on the display will be used as Xdmx XInput extension
devices. If the display-name is followed by ",noxi" then XInput extension devices on the display will not be used as Xdmx XIn-
put extension devices. Currently, the default is ",xi".
If the display-name is followed by ",console" and the display-name refers to a display that is used as a backend display, then
a console window will be opened on that display and that display will be treated as a backend display. Otherwise (or if
",noconsole" is used), the display will be treated purely as a backend or a console display, as described above.
If the display-name is followed by ",windows", then outlines of the windows on the backend will be displayed inside the console
window. Otherwise (or if ",nowindows" is used), the console window will not display the outlines of backend windows. (This
option only applies to console input.)
If the display-name is followed by ",xkb", then the next 1 to 3 comma-separated parameters will specify the keycodes, symbols,
and geometry of the keyboard for this input device. For example, ",xkb,xfree86,pc104" will specify that the "xfree86" keycodes
and the "pc104" symbols should be used to initialize the keyboard. For an SGI keyboard, ",xkb,sgi/indy(pc102)" might be use-
ful. A list of keycodes, symbols, and geometries can be found in /usr/X11R6/lib/X11/xkb. If this option is not specified, the
input device will be queried, perhaps using the XKEYBOARD extension.
If this option isn't specified, the default input source is the first back-end server (the one used for screen 0). The console
window shows the layout of the back-end display(s) and pointer movements and key presses within the console window will be used as
core input devices.
Several special function keys are active, depending on the input source:
Ctrl-Alt-q will terminate the Xdmx server in all modes.
Ctrl-Alt-g will toggle a server grab in console mode (a special cursor, currently a spider, is used to indicate an active
server grab).
Ctrl-Alt-f will toggle fine-grain motion in console mode (a special cursor, currently a cross hair, is used to indicate this
mode). If this mode is combined with a server grab, then the cursor will have 4 lines instead of only 2.
Ctrl-Alt-F1 through Ctrl-Alt-F12 will switch to another VC in local (raw) mode.
-shadowfb
This option turns on (legacy) support for the shadow frame buffer.
-noshadowfb
This option turns off (legacy) support for the shadow frame buffer. Note that this option has been deprecated and will be removed
in the next release.
-nomulticursor
This option turns off support for displaying multiple cursors on overlapped back-end displays. This option is available for test-
ing and benchmarking purposes.
-fontpath
This option sets the Xdmx server's default font path. This option can be specified multiple times to accommodate multiple font
paths. See the FONT PATHS section below for very important information regarding setting the default font path.
-configfile filename
Specify the configuration file that should be read. Note that if the -display command-line option is used, then the configuration
file will be ignored.
-config name
Specify a configuration to use. The name will be the name following the virtual keyword in the configuration file.
-stat interval screens
This option enables the display of performance statistics. The interval is in seconds. The screens is a count of the number of
back-end screens for which data is printed each interval. Specifying 0 for screens will display data for all screens.
For each screen, the following information is printed: the screen number, an absolute count of the number of XSync() calls made
(SyncCount), the rate of these calls during the previous interval (Sync/s), the average round-trip time (in microseconds) of the
last 10 XSync() calls (avSync), the maximum round-trip time (in microseconds) of the last 10 XSync calls (mxSync), the average num-
ber of XSync() requests that were pending but not yet processed for each of the last 10 processed XSync() calls, the maximum number
of XSync() requests that were pending but not yet processed for each of the last 10 processed XSync() calls, and a histogram show-
ing the distribution of the times of all of the XSync() calls that were made during the previous interval.
(The length of the moving average and the number and value of histogram bins are configurable at compile time in the dmxstat.h
header file.)
-syncbatch interval
This option sets the interval in milliseconds for XSync() batching. An interval less than or equal to 0 will disable XSync()
batching. The default interval is 100 ms.
-nooffscreenopt
This option disables the offscreen optimization. Since the lazy window creation optimization requires the offscreen optimization
to be enabled, this option will also disable the lazy window creation optimization.
-nowindowopt
This option disables the lazy window creation optimization.
-nosubdivprims
This option disables the primitive subdivision optimization.
-noxkb Disable use of the XKB extension for communication with the back end displays. (Combine with -kb to disable all use of XKB.)
-depth int
This option sets the root window's default depth. When choosing a default visual from those available on the back-end X server,
the first visual with that matches the depth specified is used.
This option can be combined with the -cc option, which specifies the default color visual class, to force the use of a specific
depth and color class for the root window.
-norender
This option disables the RENDER extension.
-noglxproxy
This option disables GLX proxy -- the build-in GLX extension implementation that is DMX aware.
-noglxswapgroup
This option disables the swap group and swap barrier extensions in GLX proxy.
-glxsyncswap
This option enables synchronization after a swap buffers call by waiting until all X protocol has been processed. When a client
issues a glXSwapBuffers request, Xdmx relays that request to each back-end X server, and those requests are buffered along with all
other protocol requests. However, in systems that have large network buffers, this buffering can lead to the set of back-end X
servers handling the swap buffers request asynchronously. With this option, an XSync() request is issued to each back-end X server
after sending the swap buffers request. The XSync() requests will flush all buffered protocol (including the swap buffers
requests) and wait until the back-end X servers have processed those requests before continuing. This option does not wait until
all GL commands have been processed so there might be previously issued commands that are still being processed in the GL pipe when
the XSync() request returns. See the -glxfinishswap option below if Xdmx should wait until the GL commands have been processed.
-glxfinishswap
This option enables synchronization after a swap buffers call by waiting until all GL commands have been completed. It is similar
to the -glxsyncswap option above; however, instead of issuing an XSync(), it issues a glFinish() request to each back-end X server
after sending the swap buffers requests. The glFinish() request will flush all buffered protocol requests, process both X and GL
requests, and wait until all previously called GL commands are complete before returning.
-ignorebadfontpaths
This option ignores font paths that are not available on all back-end servers by removing the bad font path(s) from the default
font path list. If no valid font paths are left after removing the bad paths, an error to that effect is printed in the log.
-addremovescreens
This option enables the dynamic addition and removal of screens, which is disabled by default. Note that GLXProxy and Render do
not yet support dynamic addition and removal of screens, and must be disabled via the -noglxproxy and -norender command line
options described above.
-param This option specifies parameters on the command line. Currently, only parameters dealing with XKEYBOARD configuration are sup-
ported. These parameters apply only to the core keyboard. Parameter values are installation-dependent. Please see
/usr/X11R6/lib/X11/xkb or a similar directory for complete information.
XkbRules
Defaults to "xfree86". Other values may include "sgi" and "sun".
XkbModel
Defaults to "pc101". When used with "xfree86" rules, other values may include "pc102", "pc104", "pc105", "microsoft", and
many others. When used with "sun" rules, other values may include "type4" and "type5".
XkbLayout
Defaults to "us". Other country codes and "dvorak" are usually available.
XkbVariant
Defaults to "".
XkbOptions
Defaults to "".
CONFIGURATION FILE GRAMMAR
The following words and tokens are reserved:
virtual display wall option param { } ; #
Comments start with a # mark and extend to the end of the line. They may appear anywhere. If a configuration file is read into xdmxcon-
fig, the comments in that file will be preserved, but will not be editable.
The grammar is as follows:
virtual-list ::= [ virtual-list ] | virtual
virtual ::= virtual [ name ] [ dim ] { dw-list }
dw-list ::= [ dw-list ] | dw
dw ::= display | wall | option
display ::= display name [ geometry ] [ / geometry ] [ origin ] ;
wall ::= wall [ dim ] [ dim ] name-list ;
option ::= option name-list ;
param ::= param name-list ;
param ::= param { param-list }
param-list ::= [ param-list ] | name-list ;
name-list ::= [ name-list ] | name
name ::= string | double-quoted-string
dim ::= integer x integer
geometry ::= [ integer x integer ] [ signed-integer signed-integer ]
origin ::= @ integer x integer
The name following virtual is used as an identifier for the configuration, and may be passed to Xdmx using the -config command line option.
The name of a display should be standard X display name, although no checking is performed (e.g., "machine:0").
For names, double quotes are optional unless the name is reserved or contains spaces.
The first dimension following wall is the dimension for tiling (e.g., 2x4 or 4x4). The second dimension following wall is the dimension of
each display in the wall (e.g., 1280x1024).
The first geometry following display is the geometry of the screen window on the backend server. The second geometry, which is always pre-
ceeded by a slash, is the geometry of the root window. By default, the root window has the same geometry as the screen window.
The option line can be used to specify any command-line options (e.g., -input). (It cannot be used to specify the name of the front-end
display.) The option line is processed once at server startup, just line command line options. This behavior may be unexpected.
CONFIGURATION FILE EXAMPLES
Two displays being used for a desktop may be specified in any of the following formats:
virtual example0 {
display d0:0 1280x1024 @0x0;
display d1:0 1280x1024 @1280x0;
}
virtual example1 {
display d0:0 1280x1024;
display d1:0 @1280x0;
}
virtual example2 {
display "d0:0";
display "d1:0" @1280x0;
}
virtual example3 { wall 2x1 d0:0 d1:0; }
A 4x4 wall of 16 total displays could be specified as follows (if no tiling dimension is specified, an approximate square is used):
virtual example4 {
wall d0:0 d1:0 d2:0 d3:0
d4:0 d5:0 d6:0 d7:0
d8:0 d9:0 da:0 db:0
dc:0 dd:0 de:0 df:0;
}
FONT PATHS
The font path used by the Xdmx front-end server will be propagated to each back-end server,which requires that each back-end server have
access to the exact same font paths as the front-end server. This can be most easily handled by either using a font server (e.g., xfs) or
by remotely mounting the font paths on each back-end server, and then setting the Xdmx server's default font path with the -I "-fontpath"
command line option described above.
For example, if you specify a font path with the following command line:
Xdmx :1 -display d0:0 -fontpath /usr/fonts/75dpi/ -fontpath /usr/fonts/Type1/ +xinerama
Then, /usr/fonts/75dpi/ and /usr/fonts/Type1/ must be valid font paths on the Xdmx server and all back-end server, which is d0 in this
example.
Font servers can also be specified with the -fontpath option. For example, let's assume that a properly configured font server is running
on host d0. Then, the following command line
Xdmx :1 -display d0:0 -display d1:0 -fontpath tcp/d0:7100 +xinerama
will initialize the front-end Xdmx server and each of the back-end servers to use the font server on d0.
Some fonts might not be supported by either the front-end or the back-end servers. For example, let's assume the front-end Xdmx server
includes support Type1 fonts, but one of the back-end servers does not. Let's also assume that the default font path for Xdmx includes
Type1 fonts in its font path. Then, when Xdmx initializes the default font path to load the default font, the font path that includes
Type1 fonts (along with the other default font paths that are used by the Xdmx server) is sent to the back-end server that cannot handle
Type1 fonts. That back-end server then rejects the font path and sends an error back to the Xdmx server. Xdmx then prints an error mes-
sage and exits because it failed to set the default font path and was unable load the default font.
To fix this error, the offending font path must be removed from the default font path by using a different -fontpath command line option.
The -fontpath option can also be added to the configuration file as described above.
COMMAND-LINE EXAMPLES
The back-end machines are d0 and d1, core input is from the pointer and keyboard attached to d0, clients will refer to :1 when opening win-
dows:
Xdmx :1 -display d0:0 -display d1:0 +xinerama
As above, except with core input from d1:
Xdmx :1 -display d0:0 -display d1:0 -input d1:0 +xinerama
As above, except with core input from a console window on the local display:
Xdmx :1 -display d0:0 -display d1:0 -input :0 +xinerama
As above, except with core input from the local keyboard and mouse:
Xdmx :1 -display d0:0 -display d1:0 -input local,kbd,ps2 +xinerama
Note that local input can be used under Linux while another X session is running on :0 (assuming the user can access the Linux console tty
and mouse devices): a new (blank) VC will be used for keyboard input on the local machine and the Ctrl-Alt-F* sequence will be available to
change to another VC (possibly back to another X session running on the local machine). Using Ctrl-Alt-Backspace on the blank VC will ter-
minate the Xdmx session and return to the original VC.
This example uses the configuration file shown in the previous section:
Xdmx :1 -input :0 +xinerama -configfile filename -config example2
With this configuration file line:
option -input :0 +xinerama;
the command line can be shortened to:
Xdmx :1 -configfile filename -config example2
USING THE USB DEVICE DRIVERS
The USB device drivers use the devices called /dev/input/event0, /dev/input/event1, etc. under Linux. These devices are driven using the
evdev Linux kernel module, which is part of the hid suite. Please note that if you load the mousedev or kbddev Linux kernel modules, then
USB devices will appear as core Linux input devices and you will not be able to select between using the device only as an Xdmx core device
or an Xdmx XInput extension device. Further, you may be unable to unload the mousedev Linux kernel module if XFree86 is configured to use
/dev/input/mice as an input device (this is quite helpful for laptop users and is set up by default under some Linux distributions, but
should be changed if USB devices are to be used with Xdmx).
The USB device drivers search through the Linux devices for the first mouse, keyboard, or non-mouse-non-keyboard Linux device and use that
device.
KEYBOARD INITIALIZATION
If Xdmx was invoked with -xkb or was not compiled to use the XKEYBOARD extension, then a keyboard on a backend or console will be initial-
ized using the map that the host X server provides.
If the XKEYBOARD extension is used for both Xdmx and the host X server for the keyboard (i.e., the backend or console X server), then the
type of the keyboard will be obtained from the host X server and the keyboard under Xdmx will be initialized with that information. Other-
wise, the default type of keyboard will be initialized. In both cases, the map from the host X server will not be used. This means that
different initial behavior may be noted with and without XKEYBOARD. Consistent and expected results will be obtained by running XKEYBOARD
on all servers and by avoiding the use of xmodmap on the backend or console X servers prior to starting Xdmx.
If -xkbmap is specified on the Xdmx command line, then that map will currently be used for all keyboards.
MULTIPLE CORE KEYBOARDS
X was not designed to support multiple core keyboards. However, Xdmx provides some support for multiple core keyboards. Best results will
be obtained if all of the keyboards are of the same type and are using the same keyboard map. Because the X server passes raw key code
information to the X client, key symbols for keyboards with different key maps would be different if the key code for each keyboard was
sent without translation to the client. Therefore, Xdmx will attempt to translate the key code from a core keyboard to the key code for
the key with the same key symbol of the first core keyboard that was loaded. If the key symbol appears in both maps, the results will be
expected. Otherwise, the second core keyboard will return a NoSymbol key symbol for some keys that would have been translated if it was
the first core keyboard.
SEE ALSO
DMX(3X), X(__miscmansuffix__), Xserver(1), xdmxconfig(1), vdltodmx(1), xfs(1), xkbcomp(1)
AUTHORS
Kevin E. Martin <kem@redhat.com>, David H. Dawes <dawes@xfree86.org>, and Rickard E. (Rik) Faith <faith@redhat.com>.
Portions of Xdmx are based on code from The XFree86 Project (http://www.xfree86.org) and X.Org (http://www.x.org).
XFree86 Version 4.7.0 Xdmx(1)