GIT-SVN(1) Git Manual GIT-SVN(1)
NAME
git-svn - Bidirectional operation between a Subversion repository and git
SYNOPSIS
git svn <command> [options] [arguments]
DESCRIPTION
git svn is a simple conduit for changesets between Subversion and git. It provides a bidirectional flow of changes between a Subversion and
a git repository.
git svn can track a standard Subversion repository, following the common "trunk/branches/tags" layout, with the --stdlayout option. It can
also follow branches and tags in any layout with the -T/-t/-b options (see options to init below, and also the clone command).
Once tracking a Subversion repository (with any of the above methods), the git repository can be updated from Subversion by the fetch
command and Subversion updated from git by the dcommit command.
COMMANDS
init
Initializes an empty git repository with additional metadata directories for git svn. The Subversion URL may be specified as a
command-line argument, or as full URL arguments to -T/-t/-b. Optionally, the target directory to operate on can be specified as a
second argument. Normally this command initializes the current directory.
-T<trunk_subdir>, --trunk=<trunk_subdir>, -t<tags_subdir>, --tags=<tags_subdir>, -b<branches_subdir>, --branches=<branches_subdir>, -s,
--stdlayout
These are optional command-line options for init. Each of these flags can point to a relative repository path (--tags=project/tags)
or a full url (--tags=https://foo.org/project/tags). You can specify more than one --tags and/or --branches options, in case your
Subversion repository places tags or branches under multiple paths. The option --stdlayout is a shorthand way of setting
trunk,tags,branches as the relative paths, which is the Subversion default. If any of the other options are given as well, they
take precedence.
--no-metadata
Set the noMetadata option in the [svn-remote] config. This option is not recommended, please read the svn.noMetadata section of
this manpage before using this option.
--use-svm-props
Set the useSvmProps option in the [svn-remote] config.
--use-svnsync-props
Set the useSvnsyncProps option in the [svn-remote] config.
--rewrite-root=<URL>
Set the rewriteRoot option in the [svn-remote] config.
--rewrite-uuid=<UUID>
Set the rewriteUUID option in the [svn-remote] config.
--username=<user>
For transports that SVN handles authentication for (http, https, and plain svn), specify the username. For other transports (eg
svn+ssh://), you must include the username in the URL, eg svn+ssh://foo@svn.bar.com/project
--prefix=<prefix>
This allows one to specify a prefix which is prepended to the names of remotes if trunk/branches/tags are specified. The prefix
does not automatically include a trailing slash, so be sure you include one in the argument if that is what you want. If
--branches/-b is specified, the prefix must include a trailing slash. Setting a prefix is useful if you wish to track multiple
projects that share a common repository.
--ignore-paths=<regex>
When passed to init or clone this regular expression will be preserved as a config key. See fetch for a description of
--ignore-paths.
--no-minimize-url
When tracking multiple directories (using --stdlayout, --branches, or --tags options), git svn will attempt to connect to the root
(or highest allowed level) of the Subversion repository. This default allows better tracking of history if entire projects are
moved within a repository, but may cause issues on repositories where read access restrictions are in place. Passing
--no-minimize-url will allow git svn to accept URLs as-is without attempting to connect to a higher level directory. This option is
off by default when only one URL/branch is tracked (it would do little good).
fetch
Fetch unfetched revisions from the Subversion remote we are tracking. The name of the [svn-remote "..."] section in the .git/config
file may be specified as an optional command-line argument.
--localtime
Store Git commit times in the local timezone instead of UTC. This makes git log (even without --date=local) show the same times
that svn log would in the local timezone.
This doesn't interfere with interoperating with the Subversion repository you cloned from, but if you wish for your local Git
repository to be able to interoperate with someone else's local Git repository, either don't use this option or you should both use
it in the same local timezone.
--parent
Fetch only from the SVN parent of the current HEAD.
--ignore-paths=<regex>
This allows one to specify a Perl regular expression that will cause skipping of all matching paths from checkout from SVN. The
--ignore-paths option should match for every fetch (including automatic fetches due to clone, dcommit, rebase, etc) on a given
repository.
config key: svn-remote.<name>.ignore-paths
If the ignore-paths config key is set and the command line option is also given, both regular expressions will be used.
Examples:
Skip "doc*" directory for every fetch
--ignore-paths="^doc"
Skip "branches" and "tags" of first level directories
--ignore-paths="^[^/]+/(?:branches|tags)"
clone
Runs init and fetch. It will automatically create a directory based on the basename of the URL passed to it; or if a second argument is
passed; it will create a directory and work within that. It accepts all arguments that the init and fetch commands accept; with the
exception of --fetch-all and --parent. After a repository is cloned, the fetch command will be able to update revisions without
affecting the working tree; and the rebase command will be able to update the working tree with the latest changes.
--preserve-empty-dirs
Create a placeholder file in the local Git repository for each empty directory fetched from Subversion. This includes directories
that become empty by removing all entries in the Subversion repository (but not the directory itself). The placeholder files are
also tracked and removed when no longer necessary.
--placeholder-filename=<filename>
Set the name of placeholder files created by --preserve-empty-dirs. Default: ".gitignore"
rebase
This fetches revisions from the SVN parent of the current HEAD and rebases the current (uncommitted to SVN) work against it.
This works similarly to svn update or git pull except that it preserves linear history with git rebase instead of git merge for ease of
dcommitting with git svn.
This accepts all options that git svn fetch and git rebase accept. However, --fetch-all only fetches from the current [svn-remote], and
not all [svn-remote] definitions.
Like git rebase; this requires that the working tree be clean and have no uncommitted changes.
-l, --local
Do not fetch remotely; only run git rebase against the last fetched commit from the upstream SVN.
dcommit
Commit each diff from a specified head directly to the SVN repository, and then rebase or reset (depending on whether or not there is a
diff between SVN and head). This will create a revision in SVN for each commit in git. It is recommended that you run git svn fetch and
rebase (not pull or merge) your commits against the latest changes in the SVN repository. An optional revision or branch argument may
be specified, and causes git svn to do all work on that revision/branch instead of HEAD. This is advantageous over set-tree (below)
because it produces cleaner, more linear history.
--no-rebase
After committing, do not rebase or reset.
--commit-url <URL>
Commit to this SVN URL (the full path). This is intended to allow existing git svn repositories created with one transport method
(e.g. svn:// or http:// for anonymous read) to be reused if a user is later given access to an alternate transport method (e.g.
svn+ssh:// or https://) for commit.
config key: svn-remote.<name>.commiturl
config key: svn.commiturl (overwrites all svn-remote.<name>.commiturl options)
Using this option for any other purpose (don't ask) is very strongly discouraged.
--mergeinfo=<mergeinfo>
Add the given merge information during the dcommit (e.g. --mergeinfo="/branches/foo:1-10"). All svn server versions can store this
information (as a property), and svn clients starting from version 1.5 can make use of it. To specify merge information from
multiple branches, use a single space character between the branches (--mergeinfo="/branches/foo:1-10 /branches/bar:3,5-6,8")
config key: svn.pushmergeinfo
This option will cause git-svn to attempt to automatically populate the svn:mergeinfo property in the SVN repository when possible.
Currently, this can only be done when dcommitting non-fast-forward merges where all parents but the first have already been pushed
into SVN.
--interactive
Ask the user to confirm that a patch set should actually be sent to SVN. For each patch, one may answer "yes" (accept this patch),
"no" (discard this patch), "all" (accept all patches), or "quit".
git svn dcommit returns immediately if answer if "no" or "quit", without commiting anything to SVN.
branch
Create a branch in the SVN repository.
-m, --message
Allows to specify the commit message.
-t, --tag
Create a tag by using the tags_subdir instead of the branches_subdir specified during git svn init.
-d, --destination
If more than one --branches (or --tags) option was given to the init or clone command, you must provide the location of the branch
(or tag) you wish to create in the SVN repository. The value of this option must match one of the paths specified by a --branches
(or --tags) option. You can see these paths with the commands
git config --get-all svn-remote.<name>.branches
git config --get-all svn-remote.<name>.tags
where <name> is the name of the SVN repository as specified by the -R option to init (or "svn" by default).
--username
Specify the SVN username to perform the commit as. This option overrides the username configuration property.
--commit-url
Use the specified URL to connect to the destination Subversion repository. This is useful in cases where the source SVN repository
is read-only. This option overrides configuration property commiturl.
git config --get-all svn-remote.<name>.commiturl
tag
Create a tag in the SVN repository. This is a shorthand for branch -t.
log
This should make it easy to look up svn log messages when svn users refer to -r/--revision numbers.
The following features from 'svn log' are supported:
-r <n>[:<n>], --revision=<n>[:<n>]
is supported, non-numeric args are not: HEAD, NEXT, BASE, PREV, etc ...
-v, --verbose
it's not completely compatible with the --verbose output in svn log, but reasonably close.
--limit=<n>
is NOT the same as --max-count, doesn't count merged/excluded commits
--incremental
supported
New features:
--show-commit
shows the git commit sha1, as well
--oneline
our version of --pretty=oneline
Note
SVN itself only stores times in UTC and nothing else. The regular svn client converts the UTC time to the local time (or based on
the TZ= environment). This command has the same behaviour.
Any other arguments are passed directly to git log
blame
Show what revision and author last modified each line of a file. The output of this mode is format-compatible with the output of 'svn
blame' by default. Like the SVN blame command, local uncommitted changes in the working tree are ignored; the version of the file in
the HEAD revision is annotated. Unknown arguments are passed directly to git blame.
--git-format
Produce output in the same format as git blame, but with SVN revision numbers instead of git commit hashes. In this mode, changes
that haven't been committed to SVN (including local working-copy edits) are shown as revision 0.
find-rev
When given an SVN revision number of the form rN, returns the corresponding git commit hash (this can optionally be followed by a
tree-ish to specify which branch should be searched). When given a tree-ish, returns the corresponding SVN revision number.
set-tree
You should consider using dcommit instead of this command. Commit specified commit or tree objects to SVN. This relies on your imported
fetch data being up-to-date. This makes absolutely no attempts to do patching when committing to SVN, it simply overwrites files with
those specified in the tree or commit. All merging is assumed to have taken place independently of git svn functions.
create-ignore
Recursively finds the svn:ignore property on directories and creates matching .gitignore files. The resulting files are staged to be
committed, but are not committed. Use -r/--revision to refer to a specific revision.
show-ignore
Recursively finds and lists the svn:ignore property on directories. The output is suitable for appending to the $GIT_DIR/info/exclude
file.
mkdirs
Attempts to recreate empty directories that core git cannot track based on information in $GIT_DIR/svn/<refname>/unhandled.log files.
Empty directories are automatically recreated when using "git svn clone" and "git svn rebase", so "mkdirs" is intended for use after
commands like "git checkout" or "git reset". (See the svn-remote.<name>.automkdirs config file option for more information.)
commit-diff
Commits the diff of two tree-ish arguments from the command-line. This command does not rely on being inside an git svn init-ed
repository. This command takes three arguments, (a) the original tree to diff against, (b) the new tree result, (c) the URL of the
target Subversion repository. The final argument (URL) may be omitted if you are working from a git svn-aware repository (that has been
init-ed with git svn). The -r<revision> option is required for this.
info
Shows information about a file or directory similar to what 'svn info' provides. Does not currently support a -r/--revision argument.
Use the --url option to output only the value of the URL: field.
proplist
Lists the properties stored in the Subversion repository about a given file or directory. Use -r/--revision to refer to a specific
Subversion revision.
propget
Gets the Subversion property given as the first argument, for a file. A specific revision can be specified with -r/--revision.
show-externals
Shows the Subversion externals. Use -r/--revision to specify a specific revision.
gc
Compress $GIT_DIR/svn/<refname>/unhandled.log files in .git/svn and remove $GIT_DIR/svn/<refname>index files in .git/svn.
reset
Undoes the effects of fetch back to the specified revision. This allows you to re-fetch an SVN revision. Normally the contents of an
SVN revision should never change and reset should not be necessary. However, if SVN permissions change, or if you alter your
--ignore-paths option, a fetch may fail with "not found in commit" (file not previously visible) or "checksum mismatch" (missed a
modification). If the problem file cannot be ignored forever (with --ignore-paths) the only way to repair the repo is to use reset.
Only the rev_map and refs/remotes/git-svn are changed. Follow reset with a fetch and then git reset or git rebase to move local
branches onto the new tree.
-r <n>, --revision=<n>
Specify the most recent revision to keep. All later revisions are discarded.
-p, --parent
Discard the specified revision as well, keeping the nearest parent instead.
Example:
Assume you have local changes in "master", but you need to refetch "r2".
r1---r2---r3 remotes/git-svn
A---B master
Fix the ignore-paths or SVN permissions problem that caused "r2" to be incomplete in the first place. Then:
git svn reset -r2 -p
git svn fetch
r1---r2'--r3' remotes/git-svn
r2---r3---A---B master
Then fixup "master" with git rebase. Do NOT use git merge or your history will not be compatible with a future dcommit!
git rebase --onto remotes/git-svn A^ master
r1---r2'--r3' remotes/git-svn
A'--B' master
OPTIONS
--shared[=(false|true|umask|group|all|world|everybody)], --template=<template_directory>
Only used with the init command. These are passed directly to git init.
-r <arg>, --revision <arg>
Used with the fetch command.
This allows revision ranges for partial/cauterized history to be supported. $NUMBER, $NUMBER1:$NUMBER2 (numeric ranges), $NUMBER:HEAD,
and BASE:$NUMBER are all supported.
This can allow you to make partial mirrors when running fetch; but is generally not recommended because history will be skipped and
lost.
-, --stdin
Only used with the set-tree command.
Read a list of commits from stdin and commit them in reverse order. Only the leading sha1 is read from each line, so git rev-list
--pretty=oneline output can be used.
--rmdir
Only used with the dcommit, set-tree and commit-diff commands.
Remove directories from the SVN tree if there are no files left behind. SVN can version empty directories, and they are not removed by
default if there are no files left in them. git cannot version empty directories. Enabling this flag will make the commit to SVN act
like git.
config key: svn.rmdir
-e, --edit
Only used with the dcommit, set-tree and commit-diff commands.
Edit the commit message before committing to SVN. This is off by default for objects that are commits, and forced on when committing
tree objects.
config key: svn.edit
-l<num>, --find-copies-harder
Only used with the dcommit, set-tree and commit-diff commands.
They are both passed directly to git diff-tree; see git-diff-tree(1) for more information.
config key: svn.l
config key: svn.findcopiesharder
-A<filename>, --authors-file=<filename>
Syntax is compatible with the file used by git cvsimport:
loginname = Joe User <user@example.com>
If this option is specified and git svn encounters an SVN committer name that does not exist in the authors-file, git svn will abort
operation. The user will then have to add the appropriate entry. Re-running the previous git svn command after the authors-file is
modified should continue operation.
config key: svn.authorsfile
--authors-prog=<filename>
If this option is specified, for each SVN committer name that does not exist in the authors file, the given file is executed with the
committer name as the first argument. The program is expected to return a single line of the form "Name <email>", which will be treated
as if included in the authors file.
-q, --quiet
Make git svn less verbose. Specify a second time to make it even less verbose.
--repack[=<n>], --repack-flags=<flags>
These should help keep disk usage sane for large fetches with many revisions.
--repack takes an optional argument for the number of revisions to fetch before repacking. This defaults to repacking every 1000
commits fetched if no argument is specified.
--repack-flags are passed directly to git repack.
config key: svn.repack
config key: svn.repackflags
-m, --merge, -s<strategy>, --strategy=<strategy>
These are only used with the dcommit and rebase commands.
Passed directly to git rebase when using dcommit if a git reset cannot be used (see dcommit).
-n, --dry-run
This can be used with the dcommit, rebase, branch and tag commands.
For dcommit, print out the series of git arguments that would show which diffs would be committed to SVN.
For rebase, display the local branch associated with the upstream svn repository associated with the current branch and the URL of svn
repository that will be fetched from.
For branch and tag, display the urls that will be used for copying when creating the branch or tag.
--use-log-author
When retrieving svn commits into git (as part of fetch, rebase, or dcommit operations), look for the first From: or Signed-off-by: line
in the log message and use that as the author string.
--add-author-from
When committing to svn from git (as part of commit-diff, set-tree or dcommit operations), if the existing log message doesn't already
have a From: or Signed-off-by: line, append a From: line based on the git commit's author string. If you use this, then
--use-log-author will retrieve a valid author string for all commits.
ADVANCED OPTIONS
-i<GIT_SVN_ID>, --id <GIT_SVN_ID>
This sets GIT_SVN_ID (instead of using the environment). This allows the user to override the default refname to fetch from when
tracking a single URL. The log and dcommit commands no longer require this switch as an argument.
-R<remote name>, --svn-remote <remote name>
Specify the [svn-remote "<remote name>"] section to use, this allows SVN multiple repositories to be tracked. Default: "svn"
--follow-parent
This is especially helpful when we're tracking a directory that has been moved around within the repository, or if we started tracking
a branch and never tracked the trunk it was descended from. This feature is enabled by default, use --no-follow-parent to disable it.
config key: svn.followparent
CONFIG FILE-ONLY OPTIONS
svn.noMetadata, svn-remote.<name>.noMetadata
This gets rid of the git-svn-id: lines at the end of every commit.
This option can only be used for one-shot imports as git svn will not be able to fetch again without metadata. Additionally, if you
lose your .git/svn/*/.rev_map. files, git svn will not be able to rebuild them.
The git svn log command will not work on repositories using this, either. Using this conflicts with the useSvmProps option for
(hopefully) obvious reasons.
This option is NOT recommended as it makes it difficult to track down old references to SVN revision numbers in existing documentation,
bug reports and archives. If you plan to eventually migrate from SVN to git and are certain about dropping SVN history, consider git-
filter-branch(1) instead. filter-branch also allows reformatting of metadata for ease-of-reading and rewriting authorship info for
non-"svn.authorsFile" users.
svn.useSvmProps, svn-remote.<name>.useSvmProps
This allows git svn to re-map repository URLs and UUIDs from mirrors created using SVN::Mirror (or svk) for metadata.
If an SVN revision has a property, "svm:headrev", it is likely that the revision was created by SVN::Mirror (also used by SVK). The
property contains a repository UUID and a revision. We want to make it look like we are mirroring the original URL, so introduce a
helper function that returns the original identity URL and UUID, and use it when generating metadata in commit messages.
svn.useSvnsyncProps, svn-remote.<name>.useSvnsyncprops
Similar to the useSvmProps option; this is for users of the svnsync(1) command distributed with SVN 1.4.x and later.
svn-remote.<name>.rewriteRoot
This allows users to create repositories from alternate URLs. For example, an administrator could run git svn on the server locally
(accessing via file://) but wish to distribute the repository with a public http:// or svn:// URL in the metadata so users of it will
see the public URL.
svn-remote.<name>.rewriteUUID
Similar to the useSvmProps option; this is for users who need to remap the UUID manually. This may be useful in situations where the
original UUID is not available via either useSvmProps or useSvnsyncProps.
svn-remote.<name>.pushurl
Similar to git's remote.<name>.pushurl, this key is designed to be used in cases where url points to an SVN repository via a read-only
transport, to provide an alternate read/write transport. It is assumed that both keys point to the same repository. Unlike commiturl,
pushurl is a base path. If either commiturl or pushurl could be used, commiturl takes precedence.
svn.brokenSymlinkWorkaround
This disables potentially expensive checks to workaround broken symlinks checked into SVN by broken clients. Set this option to "false"
if you track a SVN repository with many empty blobs that are not symlinks. This option may be changed while git svn is running and take
effect on the next revision fetched. If unset, git svn assumes this option to be "true".
svn.pathnameencoding
This instructs git svn to recode pathnames to a given encoding. It can be used by windows users and by those who work in non-utf8
locales to avoid corrupted file names with non-ASCII characters. Valid encodings are the ones supported by Perl's Encode module.
svn-remote.<name>.automkdirs
Normally, the "git svn clone" and "git svn rebase" commands attempt to recreate empty directories that are in the Subversion
repository. If this option is set to "false", then empty directories will only be created if the "git svn mkdirs" command is run
explicitly. If unset, git svn assumes this option to be "true".
Since the noMetadata, rewriteRoot, rewriteUUID, useSvnsyncProps and useSvmProps options all affect the metadata generated and used by git
svn; they must be set in the configuration file before any history is imported and these settings should never be changed once they are
set.
Additionally, only one of these options can be used per svn-remote section because they affect the git-svn-id: metadata line, except for
rewriteRoot and rewriteUUID which can be used together.
BASIC EXAMPLES
Tracking and contributing to the trunk of a Subversion-managed project:
# Clone a repo (like git clone):
git svn clone http://svn.example.com/project/trunk
# Enter the newly cloned directory:
cd trunk
# You should be on master branch, double-check with 'git branch'
git branch
# Do some work and commit locally to git:
git commit ...
# Something is committed to SVN, rebase your local changes against the
# latest changes in SVN:
git svn rebase
# Now commit your changes (that were committed previously using git) to SVN,
# as well as automatically updating your working HEAD:
git svn dcommit
# Append svn:ignore settings to the default git exclude file:
git svn show-ignore >> .git/info/exclude
Tracking and contributing to an entire Subversion-managed project (complete with a trunk, tags and branches):
# Clone a repo (like git clone):
git svn clone http://svn.example.com/project -T trunk -b branches -t tags
# View all branches and tags you have cloned:
git branch -r
# Create a new branch in SVN
git svn branch waldo
# Reset your master to trunk (or any other branch, replacing 'trunk'
# with the appropriate name):
git reset --hard remotes/trunk
# You may only dcommit to one branch/tag/trunk at a time. The usage
# of dcommit/rebase/show-ignore should be the same as above.
The initial git svn clone can be quite time-consuming (especially for large Subversion repositories). If multiple people (or one person
with multiple machines) want to use git svn to interact with the same Subversion repository, you can do the initial git svn clone to a
repository on a server and have each person clone that repository with git clone:
# Do the initial import on a server
ssh server "cd /pub && git svn clone http://svn.example.com/project
# Clone locally - make sure the refs/remotes/ space matches the server
mkdir project
cd project
git init
git remote add origin server:/pub/project
git config --replace-all remote.origin.fetch '+refs/remotes/*:refs/remotes/*'
git fetch
# Prevent fetch/pull from remote git server in the future,
# we only want to use git svn for future updates
git config --remove-section remote.origin
# Create a local branch from one of the branches just fetched
git checkout -b master FETCH_HEAD
# Initialize 'git svn' locally (be sure to use the same URL and -T/-b/-t options as were used on server)
git svn init http://svn.example.com/project
# Pull the latest changes from Subversion
git svn rebase
REBASE VS. PULL/MERGE
Originally, git svn recommended that the remotes/git-svn branch be pulled or merged from. This is because the author favored git svn
set-tree B to commit a single head rather than the git svn set-tree A..B notation to commit multiple commits.
If you use git svn set-tree A..B to commit several diffs and you do not have the latest remotes/git-svn merged into my-branch, you should
use git svn rebase to update your work branch instead of git pull or git merge. pull/merge can cause non-linear history to be flattened
when committing into SVN, which can lead to merge commits reversing previous commits in SVN.
MERGE TRACKING
While git svn can track copy history (including branches and tags) for repositories adopting a standard layout, it cannot yet represent
merge history that happened inside git back upstream to SVN users. Therefore it is advised that users keep history as linear as possible
inside git to ease compatibility with SVN (see the CAVEATS section below).
CAVEATS
For the sake of simplicity and interoperating with Subversion, it is recommended that all git svn users clone, fetch and dcommit directly
from the SVN server, and avoid all git clone/pull/merge/push operations between git repositories and branches. The recommended method of
exchanging code between git branches and users is git format-patch and git am, or just 'dcommit'ing to the SVN repository.
Running git merge or git pull is NOT recommended on a branch you plan to dcommit from because Subversion users cannot see any merges you've
made. Furthermore, if you merge or pull from a git branch that is a mirror of an SVN branch, dcommit may commit to the wrong branch.
If you do merge, note the following rule: git svn dcommit will attempt to commit on top of the SVN commit named in
git log --grep=^git-svn-id: --first-parent -1
You must therefore ensure that the most recent commit of the branch you want to dcommit to is the first parent of the merge. Chaos will
ensue otherwise, especially if the first parent is an older commit on the same SVN branch.
git clone does not clone branches under the refs/remotes/ hierarchy or any git svn metadata, or config. So repositories created and managed
with using git svn should use rsync for cloning, if cloning is to be done at all.
Since dcommit uses rebase internally, any git branches you git push to before dcommit on will require forcing an overwrite of the existing
ref on the remote repository. This is generally considered bad practice, see the git-push(1) documentation for details.
Do not use the --amend option of git-commit(1) on a change you've already dcommitted. It is considered bad practice to --amend commits
you've already pushed to a remote repository for other users, and dcommit with SVN is analogous to that.
When using multiple --branches or --tags, git svn does not automatically handle name collisions (for example, if two branches from
different paths have the same name, or if a branch and a tag have the same name). In these cases, use init to set up your git repository
then, before your first fetch, edit the .git/config file so that the branches and tags are associated with different name spaces. For
example:
branches = stable/*:refs/remotes/svn/stable/*
branches = debug/*:refs/remotes/svn/debug/*
BUGS
We ignore all SVN properties except svn:executable. Any unhandled properties are logged to $GIT_DIR/svn/<refname>/unhandled.log
Renamed and copied directories are not detected by git and hence not tracked when committing to SVN. I do not plan on adding support for
this as it's quite difficult and time-consuming to get working for all the possible corner cases (git doesn't do it, either). Committing
renamed and copied files is fully supported if they're similar enough for git to detect them.
CONFIGURATION
git svn stores [svn-remote] configuration information in the repository .git/config file. It is similar the core git [remote] sections
except fetch keys do not accept glob arguments; but they are instead handled by the branches and tags keys. Since some SVN repositories are
oddly configured with multiple projects glob expansions such those listed below are allowed:
[svn-remote "project-a"]
url = http://server.org/svn
fetch = trunk/project-a:refs/remotes/project-a/trunk
branches = branches/*/project-a:refs/remotes/project-a/branches/*
tags = tags/*/project-a:refs/remotes/project-a/tags/*
Keep in mind that the * (asterisk) wildcard of the local ref (right of the :) must be the farthest right path component; however the remote
wildcard may be anywhere as long as it's an independent path component (surrounded by / or EOL). This type of configuration is not
automatically created by init and should be manually entered with a text-editor or using git config.
It is also possible to fetch a subset of branches or tags by using a comma-separated list of names within braces. For example:
[svn-remote "huge-project"]
url = http://server.org/svn
fetch = trunk/src:refs/remotes/trunk
branches = branches/{red,green}/src:refs/remotes/branches/*
tags = tags/{1.0,2.0}/src:refs/remotes/tags/*
Note that git-svn keeps track of the highest revision in which a branch or tag has appeared. If the subset of branches or tags is changed
after fetching, then .git/svn/.metadata must be manually edited to remove (or reset) branches-maxRev and/or tags-maxRev as appropriate.
SEE ALSO
git-rebase(1)
GIT
Part of the git(1) suite
Git 1.7.10.4 11/24/2012 GIT-SVN(1)