bestuferrups(8) [x11r4 man page]

BESTUFERRUPS(8) 						    NUT Manual							   BESTUFERRUPS(8)

NAME

       bestuferrups - Driver for Best Power Micro-Ferrups

NOTE

       This man page only documents the hardware-specific features of the bestuferrups driver. For information about the core driver, see
       nutupsdrv(8).

SUPPORTED HARDWARE

       Best Power Micro-Ferrups ME3100, probably other similar models too.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

AUTHORS

       Andreas Wrede, John Stone (bestuferrups)

       Grant Taylor (bestfort)

       Russell Kroll (bestups)

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012							   BESTUFERRUPS(8)

BESTUPS(8)						      Network UPS Tools (NUT)							BESTUPS(8)

NAME

       bestups - Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment

NOTE

       This  man  page	only  documents  the hardware-specific features of the bestups driver.	For information about the core driver, see nutups-
       drv(8).

SUPPORTED HARDWARE

       bestups was designed to monitor Best Power UPS hardware like the Fortress, Fortress Telecom, and Patriot Pro.  It also recognizes and  sup-
       ports SOLA units such as the 520 and 620.

       Other  UPS hardware using the Phoenixtec protocol should also work, but they will generate a warning since their battery information is not
       known.

       This driver does not support some older Best/SOLA units.  Try the bestfort driver if this one does not detect your UPS.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

BUGS

       The battery percentage is derived from the voltage data that the UPS returns, since the UPS doesn't return that value  directly.   On  some
       hardware,  the charge will remain at 100% for a long time and then drops quickly shortly before the battery runs out.  You can confirm from
       the BATTVOLT readings that this is a problem with the UPS and not this driver.

       Similarly, the float from the charger in some models forces the battery charge percentage back up to 100% immedately  after  the  UPS  goes
       back on-line, so you can't tell when it is really recharged.

       Finally,  some  models  give one value for the battery's nominal voltage and yet actually have a nominal voltage slightly below that.  This
       leads to things such as the perpetual 98.7% charge on the author's Fortress 750, even when it's been charging for weeks.

AUTHOR

       Russell Kroll

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/

       NUT mailing list archives and information: http://lists.exploits.org/

								  Tue Jul 30 2002							BESTUPS(8)