Home Man
Today's Posts

Linux & Unix Commands - Search Man Pages

X11R7.4 - man page for perlclib (x11r4 section 1)

PERLCLIB(1)			 Perl Programmers Reference Guide		      PERLCLIB(1)

       perlclib - Internal replacements for standard C library functions

       One thing Perl porters should note is that perl doesn't tend to use that much of the C
       standard library internally; you'll see very little use of, for example, the ctype.h func-
       tions in there. This is because Perl tends to reimplement or abstract standard library
       functions, so that we know exactly how they're going to operate.

       This is a reference card for people who are familiar with the C library and who want to do
       things the Perl way; to tell them which functions they ought to use instead of the more
       normal C functions.


       In the following tables:

	  is a type.

	  is a pointer.

	  is a number.

	  is a string.

       "sv", "av", "hv", etc. represent variables of their respective types.

       File Operations

       Instead of the stdio.h functions, you should use the Perl abstraction layer. Instead of
       "FILE*" types, you need to be handling "PerlIO*" types.	Don't forget that with the new
       PerlIO layered I/O abstraction "FILE*" types may not even be available. See also the "per-
       lapio" documentation for more information about the following functions:

	   Instead Of:		       Use:

	   stdin		       PerlIO_stdin()
	   stdout		       PerlIO_stdout()
	   stderr		       PerlIO_stderr()

	   fopen(fn, mode)	       PerlIO_open(fn, mode)
	   freopen(fn, mode, stream)   PerlIO_reopen(fn, mode, perlio) (Deprecated)
	   fflush(stream)	       PerlIO_flush(perlio)
	   fclose(stream)	       PerlIO_close(perlio)

       File Input and Output

	   Instead Of:		       Use:

	   fprintf(stream, fmt, ...)   PerlIO_printf(perlio, fmt, ...)

	   [f]getc(stream)	       PerlIO_getc(perlio)
	   [f]putc(stream, n)	       PerlIO_putc(perlio, n)
	   ungetc(n, stream)	       PerlIO_ungetc(perlio, n)

       Note that the PerlIO equivalents of "fread" and "fwrite" are slightly different from their
       C library counterparts:

	   fread(p, size, n, stream)   PerlIO_read(perlio, buf, numbytes)
	   fwrite(p, size, n, stream)  PerlIO_write(perlio, buf, numbytes)

	   fputs(s, stream)	       PerlIO_puts(perlio, s)

       There is no equivalent to "fgets"; one should use "sv_gets" instead:

	   fgets(s, n, stream)	       sv_gets(sv, perlio, append)

       File Positioning

	   Instead Of:		       Use:

	   feof(stream) 	       PerlIO_eof(perlio)
	   fseek(stream, n, whence)    PerlIO_seek(perlio, n, whence)
	   rewind(stream)	       PerlIO_rewind(perlio)

	   fgetpos(stream, p)	       PerlIO_getpos(perlio, sv)
	   fsetpos(stream, p)	       PerlIO_setpos(perlio, sv)

	   ferror(stream)	       PerlIO_error(perlio)
	   clearerr(stream)	       PerlIO_clearerr(perlio)

       Memory Management and String Handling

	   Instead Of:			       Use:

	   t* p = malloc(n)		       Newx(id, p, n, t)
	   t* p = calloc(n, s)		       Newxz(id, p, n, t)
	   p = realloc(p, n)		       Renew(p, n, t)
	   memcpy(dst, src, n)		       Copy(src, dst, n, t)
	   memmove(dst, src, n) 	       Move(src, dst, n, t)
	   memcpy(dst, src, sizeof(t))	       StructCopy(src, dst, t)
	   memset(dst, 0, n * sizeof(t))       Zero(dst, n, t)
	   memzero(dst, 0)		       Zero(dst, n, char)
	   free(p)			       Safefree(p)

	   strdup(p)		       savepv(p)
	   strndup(p, n)	       savepvn(p, n) (Hey, strndup doesn't exist!)

	   strstr(big, little)	       instr(big, little)
	   strcmp(s1, s2)	       strLE(s1, s2) / strEQ(s1, s2) / strGT(s1,s2)
	   strncmp(s1, s2, n)	       strnNE(s1, s2, n) / strnEQ(s1, s2, n)

       Notice the different order of arguments to "Copy" and "Move" than used in "memcpy" and

       Most of the time, though, you'll want to be dealing with SVs internally instead of raw
       "char *" strings:

	   strlen(s)		       sv_len(sv)
	   strcpy(dt, src)	       sv_setpv(sv, s)
	   strncpy(dt, src, n)	       sv_setpvn(sv, s, n)
	   strcat(dt, src)	       sv_catpv(sv, s)
	   strncat(dt, src)	       sv_catpvn(sv, s)
	   sprintf(s, fmt, ...)        sv_setpvf(sv, fmt, ...)

       Note also the existence of "sv_catpvf" and "sv_vcatpvfn", combining concatenation with

       Sometimes instead of zeroing the allocated heap by using Newxz() you should consider "poi-
       soning" the data.  This means writing a bit pattern into it that should be illegal as
       pointers (and floating point numbers), and also hopefully surprising enough as integers,
       so that any code attempting to use the data without forethought will break sooner rather
       than later.  Poisoning can be done using the Poison() macros, which have similar arguments
       as Zero():

	   PoisonWith(dst, n, t, b)    scribble memory with byte b
	   PoisonNew(dst, n, t)        equal to PoisonWith(dst, n, t, 0xAB)
	   PoisonFree(dst, n, t)       equal to PoisonWith(dst, n, t, 0xEF)
	   Poison(dst, n, t)	       equal to PoisonFree(dst, n, t)

       Character Class Tests

       There are two types of character class tests that Perl implements: one type deals in
       "char"s and are thus not Unicode aware (and hence deprecated unless you know you should
       use them) and the other type deal in "UV"s and know about Unicode properties. In the fol-
       lowing table, "c" is a "char", and "u" is a Unicode codepoint.

	   Instead Of:		       Use:	       But better use:

	   isalnum(c)		       isALNUM(c)      isALNUM_uni(u)
	   isalpha(c)		       isALPHA(c)      isALPHA_uni(u)
	   iscntrl(c)		       isCNTRL(c)      isCNTRL_uni(u)
	   isdigit(c)		       isDIGIT(c)      isDIGIT_uni(u)
	   isgraph(c)		       isGRAPH(c)      isGRAPH_uni(u)
	   islower(c)		       isLOWER(c)      isLOWER_uni(u)
	   isprint(c)		       isPRINT(c)      isPRINT_uni(u)
	   ispunct(c)		       isPUNCT(c)      isPUNCT_uni(u)
	   isspace(c)		       isSPACE(c)      isSPACE_uni(u)
	   isupper(c)		       isUPPER(c)      isUPPER_uni(u)
	   isxdigit(c)		       isXDIGIT(c)     isXDIGIT_uni(u)

	   tolower(c)		       toLOWER(c)      toLOWER_uni(u)
	   toupper(c)		       toUPPER(c)      toUPPER_uni(u)

       stdlib.h functions

	   Instead Of:		       Use:

	   atof(s)		       Atof(s)
	   atol(s)		       Atol(s)
	   strtod(s, &p)	       Nothing.  Just don't use it.
	   strtol(s, &p, n)	       Strtol(s, &p, n)
	   strtoul(s, &p, n)	       Strtoul(s, &p, n)

       Notice also the "grok_bin", "grok_hex", and "grok_oct" functions in numeric.c for convert-
       ing strings representing numbers in the respective bases into "NV"s.

       In theory "Strtol" and "Strtoul" may not be defined if the machine perl is built on
       doesn't actually have strtol and strtoul. But as those 2 functions are part of the 1989
       ANSI C spec we suspect you'll find them everywhere by now.

	   int rand()		       double Drand01()
	   srand(n)		       { seedDrand01((Rand_seed_t)n);
					 PL_srand_called = TRUE; }

	   exit(n)		       my_exit(n)
	   system(s)		       Don't. Look at pp_system or use my_popen

	   getenv(s)		       PerlEnv_getenv(s)
	   setenv(s, val)	       my_putenv(s, val)

       Miscellaneous functions

       You should not even want to use setjmp.h functions, but if you think you do, use the
       "JMPENV" stack in scope.h instead.

       For "signal"/"sigaction", use "rsignal(signo, handler)".

       "perlapi", "perlapio", "perlguts"

perl v5.8.9				    2007-11-17				      PERLCLIB(1)

All times are GMT -4. The time now is 11:47 PM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
Show Password