Unix/Linux Go Back    


X11R7.4 - man page for perl571delta (x11r4 section 1)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)


PERL571DELTA(1) 		 Perl Programmers Reference Guide		  PERL571DELTA(1)

NAME
       perl571delta - what's new for perl v5.7.1

DESCRIPTION
       This document describes differences between the 5.7.0 release and the 5.7.1 release.

       (To view the differences between the 5.6.0 release and the 5.7.0 release, see
       perl570delta.)

Security Vulnerability Closed
       (This change was already made in 5.7.0 but bears repeating here.)

       A potential security vulnerability in the optional suidperl component of Perl was identi-
       fied in August 2000.  suidperl is neither built nor installed by default.  As of April
       2001 the only known vulnerable platform is Linux, most likely all Linux distributions.
       CERT and various vendors and distributors have been alerted about the vulnerability.  See
       http://www.cpan.org/src/5.0/sperl-2000-08-05/sperl-2000-08-05.txt for more information.

       The problem was caused by Perl trying to report a suspected security exploit attempt using
       an external program, /bin/mail.	On Linux platforms the /bin/mail program had an undocu-
       mented feature which when combined with suidperl gave access to a root shell, resulting in
       a serious compromise instead of reporting the exploit attempt.  If you don't have
       /bin/mail, or if you have 'safe setuid scripts', or if suidperl is not installed, you are
       safe.

       The exploit attempt reporting feature has been completely removed from all the Perl 5.7
       releases (and will be gone also from the maintenance release 5.6.1), so that particular
       vulnerability isn't there anymore.  However, further security vulnerabilities are, unfor-
       tunately, always possible.  The suidperl code is being reviewed and if deemed too risky to
       continue to be supported, it may be completely removed from future releases.  In any case,
       suidperl should only be used by security experts who know exactly what they are doing and
       why they are using suidperl instead of some other solution such as sudo ( see
       http://www.courtesan.com/sudo/ ).

Incompatible Changes
       o   Although "you shouldn't do that", it was possible to write code that depends on Perl's
	   hashed key order (Data::Dumper does this).  The new algorithm "One-at-a-Time" produces
	   a different hashed key order.  More details are in "Performance Enhancements".

       o   The list of filenames from glob() (or <...>) is now by default sorted alphabetically
	   to be csh-compliant.  (bsd_glob() does still sort platform natively, ASCII or EBCDIC,
	   unless GLOB_ALPHASORT is specified.)

Core Enhancements
       AUTOLOAD Is Now Lvaluable

       AUTOLOAD is now lvaluable, meaning that you can add the :lvalue attribute to AUTOLOAD sub-
       routines and you can assign to the AUTOLOAD return value.

       PerlIO is Now The Default

       o   IO is now by default done via PerlIO rather than system's "stdio".  PerlIO allows
	   "layers" to be "pushed" onto a file handle to alter the handle's behaviour.	Layers
	   can be specified at open time via 3-arg form of open:

	      open($fh,'>:crlf :utf8', $path) || ...

	   or on already opened handles via extended "binmode":

	      binmode($fh,':encoding(iso-8859-7)');

	   The built-in layers are: unix (low level read/write), stdio (as in previous Perls),
	   perlio (re-implementation of stdio buffering in a portable manner), crlf (does CRLF
	   <=> "\n" translation as on Win32, but available on any platform).  A mmap layer may be
	   available if platform supports it (mostly UNIXes).

	   Layers to be applied by default may be specified via the 'open' pragma.

	   See "Installation and Configuration Improvements" for the effects of PerlIO on your
	   architecture name.

       o   File handles can be marked as accepting Perl's internal encoding of Unicode (UTF-8 or
	   UTF-EBCDIC depending on platform) by a pseudo layer ":utf8" :

	      open($fh,">:utf8","Uni.txt");

	   Note for EBCDIC users: the pseudo layer ":utf8" is erroneously named for you since
	   it's not UTF-8 what you will be getting but instead UTF-EBCDIC.  See perlunicode,
	   utf8, and http://www.unicode.org/unicode/reports/tr16/ for more information.  In
	   future releases this naming may change.

       o   File handles can translate character encodings from/to Perl's internal Unicode form on
	   read/write via the ":encoding()" layer.

       o   File handles can be opened to "in memory" files held in Perl scalars via:

	      open($fh,'>', \$variable) || ...

       o   Anonymous temporary files are available without need to 'use FileHandle' or other mod-
	   ule via

	      open($fh,"+>", undef) || ...

	   That is a literal undef, not an undefined value.

       o   The list form of "open" is now implemented for pipes (at least on UNIX):

	      open($fh,"-|", 'cat', '/etc/motd')

	   creates a pipe, and runs the equivalent of exec('cat', '/etc/motd') in the child
	   process.

       o   The following builtin functions are now overridable: chop(), chomp(), each(), keys(),
	   pop(), push(), shift(), splice(), unshift().

       o   Formats now support zero-padded decimal fields.

       o   Perl now tries internally to use integer values in numeric conversions and basic
	   arithmetics (+ - * /) if the arguments are integers, and tries also to keep the
	   results stored internally as integers.  This change leads into often slightly faster
	   and always less lossy arithmetics. (Previously Perl always preferred floating point
	   numbers in its math.)

       o   The printf() and sprintf() now support parameter reordering using the "%\d+\$" and
	   "*\d+\$" syntaxes.  For example

	       print "%2\$s %1\$s\n", "foo", "bar";

	   will print "bar foo\n"; This feature helps in writing internationalised software.

       o   Unicode in general should be now much more usable.  Unicode can be used in hash keys,
	   Unicode in regular expressions should work now, Unicode in tr/// should work now
	   (though tr/// seems to be a particularly tricky to get right, so you have been warned)

       o   The Unicode Character Database coming with Perl has been upgraded to Unicode 3.1.  For
	   more information, see http://www.unicode.org/ , and http://www.unicode.org/uni-
	   code/reports/tr27/

	   For developers interested in enhancing Perl's Unicode capabilities: almost all the UCD
	   files are included with the Perl distribution in the lib/unicode subdirectory.  The
	   most notable omission, for space considerations, is the Unihan database.

       o   The Unicode character classes \p{Blank} and \p{SpacePerl} have been added.  "Blank" is
	   like C isblank(), that is, it contains only "horizontal whitespace" (the space charac-
	   ter is, the newline isn't), and the "SpacePerl" is the Unicode equivalent of "\s"
	   (\p{Space} isn't, since that includes the vertical tabulator character, whereas "\s"
	   doesn't.)

       Signals Are Now Safe

       Perl used to be fragile in that signals arriving at inopportune moments could corrupt
       Perl's internal state.

Modules and Pragmata
       New Modules

       o   B::Concise, by Stephen McCamant, is a new compiler backend for walking the Perl syntax
	   tree, printing concise info about ops.  The output is highly customisable.

	   See B::Concise for more information.

       o   Class::ISA, by Sean Burke, for reporting the search path for a class's ISA tree, has
	   been added.

	   See Class::ISA for more information.

       o   Cwd has now a split personality: if possible, an extension is used, (this will hope-
	   fully be both faster and more secure and robust) but if not possible, the familiar
	   Perl library implementation is used.

       o   Digest, a frontend module for calculating digests (checksums), from Gisle Aas, has
	   been added.

	   See Digest for more information.

       o   Digest::MD5 for calculating MD5 digests (checksums), by Gisle Aas, has been added.

	       use Digest::MD5 'md5_hex';

	       $digest = md5_hex("Thirsty Camel");

	       print $digest, "\n"; # 01d19d9d2045e005c3f1b80e8b164de1

	   NOTE: the MD5 backward compatibility module is deliberately not included since its use
	   is discouraged.

	   See Digest::MD5 for more information.

       o   Encode, by Nick Ing-Simmons, provides a mechanism to translate between different char-
	   acter encodings.  Support for Unicode, ISO-8859-*, ASCII, CP*, KOI8-R, and three vari-
	   ants of EBCDIC are compiled in to the module.  Several other encodings (like Japanese,
	   Chinese, and MacIntosh encodings) are included and will be loaded at runtime.

	   Any encoding supported by Encode module is also available to the ":encoding()" layer
	   if PerlIO is used.

	   See Encode for more information.

       o   Filter::Simple is an easy-to-use frontend to Filter::Util::Call, from Damian Conway.

	       # in MyFilter.pm:

	       package MyFilter;

	       use Filter::Simple sub {
		   while (my ($from, $to) = splice @_, 0, 2) {
			   s/$from/$to/g;
		   }
	       };

	       1;

	       # in user's code:

	       use MyFilter qr/red/ => 'green';

	       print "red\n";	# this code is filtered, will print "green\n"
	       print "bored\n"; # this code is filtered, will print "bogreen\n"

	       no MyFilter;

	       print "red\n";	# this code is not filtered, will print "red\n"

	   See Filter::Simple for more information.

       o   Filter::Util::Call, by Paul Marquess, provides you with the framework to write Source
	   Filters in Perl.  For most uses the frontend Filter::Simple is to be preferred.  See
	   Filter::Util::Call for more information.

       o   Locale::Constants, Locale::Country, Locale::Currency, and Locale::Language, from Neil
	   Bowers, have been added.  They provide the codes for various locale standards, such as
	   "fr" for France, "usd" for US Dollar, and "jp" for Japanese.

	       use Locale::Country;

	       $country = code2country('jp');		    # $country gets 'Japan'
	       $code	= country2code('Norway');	    # $code gets 'no'

	   See Locale::Constants, Locale::Country, Locale::Currency, and Locale::Language for
	   more information.

       o   MIME::Base64, by Gisle Aas, allows you to encode data in base64.

	       use MIME::Base64;

	       $encoded = encode_base64('Aladdin:open sesame');
	       $decoded = decode_base64($encoded);

	       print $encoded, "\n"; # "QWxhZGRpbjpvcGVuIHNlc2FtZQ=="

	   See MIME::Base64 for more information.

       o   MIME::QuotedPrint, by Gisle Aas, allows you to encode data in quoted-printable encod-
	   ing.

	       use MIME::QuotedPrint;

	       $encoded = encode_qp("Smiley in Unicode: \x{263a}");
	       $decoded = decode_qp($encoded);

	       print $encoded, "\n"; # "Smiley in Unicode: =263A"

	   MIME::QuotedPrint has been enhanced to provide the basic methods necessary to use it
	   with PerlIO::Via as in :

	       use MIME::QuotedPrint;
	       open($fh,">Via(MIME::QuotedPrint)",$path)

	   See MIME::QuotedPrint for more information.

       o   PerlIO::Scalar, by Nick Ing-Simmons, provides the implementation of IO to "in memory"
	   Perl scalars as discussed above.  It also serves as an example of a loadable layer.
	   Other future possibilities include PerlIO::Array and PerlIO::Code.  See PerlIO::Scalar
	   for more information.

       o   PerlIO::Via, by Nick Ing-Simmons, acts as a PerlIO layer and wraps PerlIO layer func-
	   tionality provided by a class (typically implemented in perl code).

	       use MIME::QuotedPrint;
	       open($fh,">Via(MIME::QuotedPrint)",$path)

	   This will automatically convert everything output to $fh to Quoted-Printable.  See
	   PerlIO::Via for more information.

       o   Pod::Text::Overstrike, by Joe Smith, has been added.  It converts POD data to format-
	   ted overstrike text.  See Pod::Text::Overstrike for more information.

       o   Switch from Damian Conway has been added.  Just by saying

	       use Switch;

	   you have "switch" and "case" available in Perl.

	       use Switch;

	       switch ($val) {

			   case 1	   { print "number 1" }
			   case "a"	   { print "string a" }
			   case [1..10,42] { print "number in list" }
			   case (@array)   { print "number in list" }
			   case /\w+/	   { print "pattern" }
			   case qr/\w+/    { print "pattern" }
			   case (%hash)    { print "entry in hash" }
			   case (\%hash)   { print "entry in hash" }
			   case (\&sub)    { print "arg to subroutine" }
			   else 	   { print "previous case not true" }
	       }

	   See Switch for more information.

       o   Text::Balanced from Damian Conway has been added, for extracting delimited text
	   sequences from strings.

	       use Text::Balanced 'extract_delimited';

	       ($a, $b) = extract_delimited("'never say never', he never said", "'", '');

	   $a will be "'never say never'", $b will be ', he never said'.

	   In addition to extract_delimited() there are also extract_bracketed(), extract_quote-
	   like(), extract_codeblock(), extract_variable(), extract_tagged(), extract_multiple(),
	   gen_delimited_pat(), and gen_extract_tagged().  With these you can implement rather
	   advanced parsing algorithms.  See Text::Balanced for more information.

       o   Tie::RefHash::Nestable, by Edward Avis, allows storing hash references (unlike the
	   standard Tie::RefHash)  The module is contained within Tie::RefHash.

       o   XS::Typemap, by Tim Jenness, is a test extension that exercises XS typemaps.  Nothing
	   gets installed but for extension writers the code is worth studying.

       Updated And Improved Modules and Pragmata

       o   B::Deparse should be now more robust.  It still far from providing a full round trip
	   for any random piece of Perl code, though, and is under active development: expect
	   more robustness in 5.7.2.

       o   Class::Struct can now define the classes in compile time.

       o   Math::BigFloat has undergone much fixing, and in addition the fmod() function now sup-
	   ports modulus operations.

	   ( The fixed Math::BigFloat module is also available in CPAN for those who can't
	   upgrade their Perl: http://www.cpan.org/authors/id/J/JP/JPEACOCK/ )

       o   Devel::Peek now has an interface for the Perl memory statistics (this works only if
	   you are using perl's malloc, and if you have compiled with debugging).

       o   IO::Socket has now atmark() method, which returns true if the socket is positioned at
	   the out-of-band mark.  The method is also exportable as a sockatmark() function.

       o   IO::Socket::INET has support for ReusePort option (if your platform supports it).  The
	   Reuse option now has an alias, ReuseAddr.  For clarity you may want to prefer Reuse-
	   Addr.

       o   Net::Ping has been enhanced.  There is now "external" protocol which uses
	   Net::Ping::External module which runs external ping(1) and parses the output.  An
	   alpha version of Net::Ping::External is available in CPAN and in 5.7.2 the
	   Net::Ping::External may be integrated to Perl.

       o   The "open" pragma allows layers other than ":raw" and ":crlf" when using PerlIO.

       o   POSIX::sigaction() is now much more flexible and robust.  You can now install coderef
	   handlers, 'DEFAULT', and 'IGNORE' handlers, installing new handlers was not atomic.

       o   The Test module has been significantly enhanced.  Its use is greatly recommended for
	   module writers.

       o   The utf8:: name space (as in the pragma) provides various Perl-callable functions to
	   provide low level access to Perl's internal Unicode representation.	At the moment
	   only length() has been implemented.

       The following modules have been upgraded from the versions at CPAN: CPAN, CGI, DB_File,
       File::Temp, Getopt::Long, Pod::Man, Pod::Text, Storable, Text-Tabs+Wrap.

Performance Enhancements
       o   Hashes now use Bob Jenkins "One-at-a-Time" hashing key algorithm ( http://burtlebur-
	   tle.net/bob/hash/doobs.html ).  This algorithm is reasonably fast while producing a
	   much better spread of values than the old hashing algorithm (originally by Chris
	   Torek, later tweaked by Ilya Zakharevich).  Hash values output from the algorithm on a
	   hash of all 3-char printable ASCII keys comes much closer to passing the DIEHARD ran-
	   dom number generation tests.  According to perlbench, this change has not affected the
	   overall speed of Perl.

       o   unshift() should now be noticeably faster.

Utility Changes
       o   h2xs now produces template README.

       o   s2p has been completely rewritten in Perl.  (It is in fact a full implementation of
	   sed in Perl.)

       o   xsubpp now supports OUT keyword.

New Documentation
       perlclib

       Internal replacements for standard C library functions.	(Interesting only for extension
       writers and Perl core hackers.)

       perliol

       Internals of PerlIO with layers.

       README.aix

       Documentation on compiling Perl on AIX has been added.  AIX has several different C com-
       pilers and getting the right patch level is essential.  On install README.aix will be
       installed as perlaix.

       README.bs2000

       Documentation on compiling Perl on the POSIX-BC platform (an EBCDIC mainframe environment)
       has been added.

       This was formerly known as README.posix-bc but the name was considered to be too confusing
       (it has nothing to do with the POSIX module or the POSIX standard).  On install
       README.bs2000 will be installed as perlbs2000.

       README.macos

       In perl 5.7.1 (and in the 5.6.1) the MacPerl sources have been synchronised with the stan-
       dard Perl sources.  To compile MacPerl some additional steps are required, and this file
       documents those steps.  On install README.macos will be installed as perlmacos.

       README.mpeix

       The README.mpeix has been podified, which means that this information about compiling and
       using Perl on the MPE/iX miniframe platform will be installed as perlmpeix.

       README.solaris

       README.solaris has been created and Solaris wisdom from elsewhere in the Perl documenta-
       tion has been collected there.  On install README.solaris will be installed as perlso-
       laris.

       README.vos

       The README.vos has been podified, which means that this information about compiling and
       using Perl on the Stratus VOS miniframe platform will be installed as perlvos.

       Porting/repository.pod

       Documentation on how to use the Perl source repository has been added.

Installation and Configuration Improvements
       o   Because PerlIO is now the default on most platforms, "-perlio" doesn't get appended to
	   the $Config{archname} (also known as $^O) anymore.  Instead, if you explicitly choose
	   not to use perlio (Configure command line option -Uuseperlio), you will get "-stdio"
	   appended.

       o   Another change related to the architecture name is that "-64all" (-Duse64bitall, or
	   "maximally 64-bit") is appended only if your pointers are 64 bits wide.  (To be exact,
	   the use64bitall is ignored.)

       o   APPLLIB_EXP, a less-know configuration-time definition, has been documented.  It can
	   be used to prepend site-specific directories to Perl's default search path (@INC), see
	   INSTALL for information.

       o   Building Berkeley DB3 for compatibility modes for DB, NDBM, and ODBM has been docu-
	   mented in INSTALL.

       o   If you are on IRIX or Tru64 platforms, new profiling/debugging options have been
	   added, see perlhack for more information about pixie and Third Degree.

       New Or Improved Platforms

       For the list of platforms known to support Perl, see "Supported Platforms" in perlport.

       o   AIX dynamic loading should be now better supported.

       o   After a long pause, AmigaOS has been verified to be happy with Perl.

       o   EBCDIC platforms (z/OS, also known as OS/390, POSIX-BC, and VM/ESA) have been
	   regained.  Many test suite tests still fail and the co-existence of Unicode and EBCDIC
	   isn't quite settled, but the situation is much better than with Perl 5.6.  See per-
	   los390, perlbs2000 (for POSIX-BC), and perlvmesa for more information.

       o   Building perl with -Duseithreads or -Duse5005threads now works under HP-UX 10.20 (pre-
	   viously it only worked under 10.30 or later). You will need a thread library package
	   installed. See README.hpux.

       o   Mac OS Classic (MacPerl has of course been available since perl 5.004 but now the
	   source code bases of standard Perl and MacPerl have been synchronised)

       o   NCR MP-RAS is now supported.

       o   NonStop-UX is now supported.

       o   Amdahl UTS is now supported.

       o   z/OS (formerly known as OS/390, formerly known as MVS OE) has now support for dynamic
	   loading.  This is not selected by default, however, you must specify -Dusedl in the
	   arguments of Configure.

       Generic Improvements

       o   Configure no longer includes the DBM libraries (dbm, gdbm, db, ndbm) when building the
	   Perl binary.  The only exception to this is SunOS 4.x, which needs them.

       o   Some new Configure symbols, useful for extension writers:

	   d_cmsghdr
		   For struct cmsghdr.

	   d_fcntl_can_lock
		   Whether fcntl() can be used for file locking.

	   d_fsync
	   d_getitimer
	   d_getpagsz
		   For getpagesize(), though you should prefer POSIX::sysconf(_SC_PAGE_SIZE))

	   d_msghdr_s
		   For struct msghdr.

	   need_va_copy
		   Whether one needs to use Perl_va_copy() to copy varargs.

	   d_readv
	   d_recvmsg
	   d_sendmsg
	   sig_size
		   The number of elements in an array needed to hold all the available signals.

	   d_sockatmark
	   d_strtoq
	   d_u32align
		   Whether one needs to access character data aligned by U32 sized pointers.

	   d_ualarm
	   d_usleep
       o   Removed Configure symbols: the PDP-11 memory model settings: huge, large, medium, mod-
	   els.

       o   SOCKS support is now much more robust.

       o   If your file system supports symbolic links you can build Perl outside of the source
	   directory by

		   mkdir perl/build/directory
		   cd perl/build/directory
		   sh /path/to/perl/source/Configure -Dmksymlinks ...

	   This will create in perl/build/directory a tree of symbolic links pointing to files in
	   /path/to/perl/source.  The original files are left unaffected.  After Configure has
	   finished you can just say

		   make all test

	   and Perl will be built and tested, all in perl/build/directory.

Selected Bug Fixes
       Numerous memory leaks and uninitialized memory accesses have been hunted down.  Most
       importantly anonymous subs used to leak quite a bit.

       o   chop(@list) in list context returned the characters chopped in reverse order.  This
	   has been reversed to be in the right order.

       o   The order of DESTROYs has been made more predictable.

       o   mkdir() now ignores trailing slashes in the directory name, as mandated by POSIX.

       o   Attributes (like :shared) didn't work with our().

       o   The PERL5OPT environment variable (for passing command line arguments to Perl) didn't
	   work for more than a single group of options.

       o   The tainting behaviour of sprintf() has been rationalized.  It does not taint the
	   result of floating point formats anymore, making the behaviour consistent with that of
	   string interpolation.

       o   All but the first argument of the IO syswrite() method are now optional.

       o   Tie::ARRAY SPLICE method was broken.

       o   vec() now tries to work with characters <= 255 when possible, but it leaves higher
	   character values in place.  In that case, if vec() was used to modify the string, it
	   is no longer considered to be utf8-encoded.

       Platform Specific Changes and Fixes

       o   Linux previously had problems related to sockaddrlen when using accept(), revcfrom()
	   (in Perl: recv()), getpeername(), and getsockname().

       o   Previously DYNIX/ptx had problems in its Configure probe for non-blocking I/O.

       o   Windows

	   o	   Borland C++ v5.5 is now a supported compiler that can build Perl.  However,
		   the generated binaries continue to be incompatible with those generated by the
		   other supported compilers (GCC and Visual C++).

	   o	   Win32::GetCwd() correctly returns C:\ instead of C: when at the drive root.
		   Other bugs in chdir() and Cwd::cwd() have also been fixed.

	   o	   Duping socket handles with open(F, ">&MYSOCK") now works under Windows 9x.

	   o	   HTML files will be installed in c:\perl\html instead of c:\perl\lib\pod\html

	   o	   The makefiles now provide a single switch to bulk-enable all the features
		   enabled in ActiveState ActivePerl (a popular binary distribution).

New or Changed Diagnostics
       Two new debugging options have been added: if you have compiled your Perl with debugging,
       you can use the -DT and -DR options to trace tokenising and to add reference counts to
       displaying variables, respectively.

       o   If an attempt to use a (non-blessed) reference as an array index is made, a warning is
	   given.

       o   "push @a;" and "unshift @a;" (with no values to push or unshift) now give a warning.
	   This may be a problem for generated and eval'ed code.

Changed Internals
       o   Some new APIs: ptr_table_clear(), ptr_table_free(), sv_setref_uv().	For the full list
	   of the available APIs see perlapi.

       o   dTHR and djSP have been obsoleted; the former removed (because it's a no-op) and the
	   latter replaced with dSP.

       o   Perl now uses system malloc instead of Perl malloc on all 64-bit platforms, and even
	   in some not-always-64-bit platforms like AIX, IRIX, and Solaris.  This change breaks
	   backward compatibility but Perl's malloc has problems with large address spaces and
	   also the speed of vendors' malloc is generally better in large address space machines
	   (Perl's malloc is mostly tuned for space).

New Tests
       Many new tests have been added.	The most notable is probably the lib/1_compile: it is
       very notable because running it takes quite a long time -- it test compiles all the Perl
       modules in the distribution.  Please be patient.

Known Problems
       Note that unlike other sections in this document (which describe changes since 5.7.0) this
       section is cumulative containing known problems for all the 5.7 releases.

       AIX vac 5.0.0.0 May Produce Buggy Code For Perl

       The AIX C compiler vac version 5.0.0.0 may produce buggy code, resulting in few random
       tests failing, but when the failing tests are run by hand, they succeed.  We suggest
       upgrading to at least vac version 5.0.1.0, that has been known to compile Perl correctly.
       "lslpp -L|grep vac.C" will tell you the vac version.

       lib/ftmp-security tests warn 'system possibly insecure'

       Don't panic.  Read INSTALL 'make test' section instead.

       lib/io_multihomed Fails In LP64-Configured HP-UX

       The lib/io_multihomed test may hang in HP-UX if Perl has been configured to be 64-bit.
       Because other 64-bit platforms do not hang in this test, HP-UX is suspect. All other tests
       pass in 64-bit HP-UX. The test attempts to create and connect to "multihomed" sockets
       (sockets which have multiple IP addresses).

       Test lib/posix Subtest 9 Fails In LP64-Configured HP-UX

       If perl is configured with -Duse64bitall, the successful result of the subtest 10 of
       lib/posix may arrive before the successful result of the subtest 9, which confuses the
       test harness so much that it thinks the subtest 9 failed.

       lib/b test 19

       The test fails on various platforms (PA64 and IA64 are known), but the exact cause is
       still being investigated.

       Linux With Sfio Fails op/misc Test 48

       No known fix.

       sigaction test 13 in VMS

       The test is known to fail; whether it's because of VMS of because of faulty test is not
       known.

       sprintf tests 129 and 130

       The op/sprintf tests 129 and 130 are known to fail on some platforms.  Examples include
       any platform using sfio, and Compaq/Tandem's NonStop-UX.  The failing platforms do not
       comply with the ANSI C Standard, line 19ff on page 134 of ANSI X3.159 1989 to be exact.
       (They produce something else than "1" and "-1" when formatting 0.6 and -0.6 using the
       printf format "%.0f", most often they produce "0" and "-0".)

       Failure of Thread tests

       The subtests 19 and 20 of lib/thr5005.t test are known to fail due to fundamental problems
       in the 5.005 threading implementation. These are not new failures--Perl 5.005_0x has the
       same bugs, but didn't have these tests. (Note that support for 5.005-style threading
       remains experimental.)

       Localising a Tied Variable Leaks Memory

	   use Tie::Hash;
	   tie my %tie_hash => 'Tie::StdHash';

	   ...

	   local($tie_hash{Foo}) = 1; # leaks

       Code like the above is known to leak memory every time the local() is executed.

       Self-tying of Arrays and Hashes Is Forbidden

       Self-tying of arrays and hashes is broken in rather deep and hard-to-fix ways.  As a stop-
       gap measure to avoid people from getting frustrated at the mysterious results (core dumps,
       most often) it is for now forbidden (you will get a fatal error even from an attempt).

       Building Extensions Can Fail Because Of Largefiles

       Some extensions like mod_perl are known to have issues with `largefiles', a change brought
       by Perl 5.6.0 in which file offsets default to 64 bits wide, where supported.  Modules may
       fail to compile at all or compile and work incorrectly.	Currently there is no good solu-
       tion for the problem, but Configure now provides appropriate non-largefile ccflags,
       ldflags, libswanted, and libs in the %Config hash (e.g., $Config{ccflags_nolargefiles}) so
       the extensions that are having problems can try configuring themselves without the large-
       fileness.  This is admittedly not a clean solution, and the solution may not even work at
       all.  One potential failure is whether one can (or, if one can, whether it's a good idea)
       link together at all binaries with different ideas about file offsets, all this is plat-
       form-dependent.

       The Compiler Suite Is Still Experimental

       The compiler suite is slowly getting better but is nowhere near working order yet.

Reporting Bugs
       If you find what you think is a bug, you might check the articles recently posted to the
       comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org/  There
       may also be information at http://www.perl.com/perl/ , the Perl Home Page.

       If you believe you have an unreported bug, please run the perlbug program included with
       your release.  Be sure to trim your bug down to a tiny but sufficient test case.  Your bug
       report, along with the output of "perl -V", will be sent off to perlbug@perl.org to be an-
       alysed by the Perl porting team.

SEE ALSO
       The Changes file for exhaustive details on what changed.

       The INSTALL file for how to build Perl.

       The README file for general stuff.

       The Artistic and Copying files for copyright information.

HISTORY
       Written by Jarkko Hietaniemi <jhi@iki.fi>, with many contributions from The Perl Porters
       and Perl Users submitting feedback and patches.

       Send omissions or corrections to <perlbug@perl.org>.

perl v5.8.9				    2007-11-17				  PERL571DELTA(1)
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums


All times are GMT -4. The time now is 01:09 AM.