Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

liebert(8) [v7 man page]

LIEBERT(8)							    NUT Manual								LIEBERT(8)

NAME
liebert - Driver for Liebert contact-closure UPS equipment NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8). SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver. EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5). BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable. You may have to build another cable with DTR connected through to the UPS for it to work. There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a fundamental limitation of any contact-closure driver. SEE ALSO
The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/ Network UPS Tools 05/21/2012 LIEBERT(8)

Check Out this Related Man Page

LIEBERT(8)							    NUT Manual								LIEBERT(8)

NAME
liebert - Driver for Liebert contact-closure UPS equipment NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8). SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver. EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5). BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable. You may have to build another cable with DTR connected through to the UPS for it to work. There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a fundamental limitation of any contact-closure driver. SEE ALSO
The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/ Network UPS Tools 05/21/2012 LIEBERT(8)
Man Page

15 More Discussions You Might Find Interesting

1. IP Networking

unix and the cable modem

If the cable modem that the cable company is using doesn't support unix is there a way around that . Are there drivers I can get online or is there a way to configure redhat lenix (that's what I will be using) to work with the cable modem. Or is there a way to buy a third party cable modem that... (3 Replies)
Discussion started by: gparsons70
3 Replies

2. UNIX for Dummies Questions & Answers

Linux and my cable modem

I recently installed Caldera 2.4 (successfully:p ), but I cannot seem to get my cable modem up and running! My ISP is AT&T and I'm using @home. I've tried using DHCP and that didn't work either. I briefly read the cable modem HOWTO, but the lsmod didn't list my network card (3COM). What do I do now? (4 Replies)
Discussion started by: zorro
4 Replies

3. UNIX for Dummies Questions & Answers

Is anyone using unix with cable modem

Is anyone using a cable modem with unix and if so does your cable co. support unix or did you get that going on your own and how. Thank you for all your help. (5 Replies)
Discussion started by: gparsons70
5 Replies

4. UNIX for Advanced & Expert Users

Any RF unix gurus out there?

I am having a problem here. We are having several problems in regards to hung process's on unix (HPUX box), caused by my RF equipment (Mobile data capture units). these contact the host via a simply telnet session and locks the system? Is it a timeout problem as the timeout is disabled on the host. (5 Replies)
Discussion started by: Subrosa
5 Replies

5. Cybersecurity

how to access computer behind cable modem, from outside,across "the Internet"

hi im running a web server running, connected to my cable modem, which, as usual, has 2 different network address. one from "outside"(ie from isp), and the other for the internal network. im giving a static ip to the server.how do i access this server from outside the network across "the... (2 Replies)
Discussion started by: R00tSc0rpi0n
2 Replies

6. AIX

connect optical cable to HBA

Hi guys, I have not connected optical cable to the Dual port HBA before. My integrator used to do that for me all the time. Can someone explain to me how can I physically connect optical cable to the HBA port in P570. The optical cable has two connectors and right now the HBA port has just a... (7 Replies)
Discussion started by: solaix14
7 Replies

7. IP Networking

tcp n00b - can't ping router

please help! I have a sun blade with 2 x nics configured, both on different subnets. The eri0 interface (192.168.0.100) is connected to my router (192.168.0.1), but if i try to ping the router, it times out. any suggestions are welcome - i noticed the 2 mac addresses are the same, i've set... (7 Replies)
Discussion started by: badoshi
7 Replies

8. Post Here to Contact Site Administrators and Moderators

Something I did?

Hi I has just wondering if I have offended any one or broke some rule that I wasn't aware of. I'm mentioning this because on my last to threads I received nothing. So if I did please point it out to me. Thank you (3 Replies)
Discussion started by: Ex-Capsa
3 Replies

9. IP Networking

Two Servers via ethernet crossover cable

Hi, I'm trying to communicate two servers (HP DLProliant 380 G5) via a crossover cable, but I don't get them to ping each other. I am working in RHEL 4. These are the steps I've performed: 1) Plugged the crossover cables in eth2. (note: The cable is brand new. Also I built one myself... (3 Replies)
Discussion started by: jrodriguez365
3 Replies

10. Programming

How detect TCP/IP socket shutdown when ethernet cable is disconnected

Hi, I want to code TCP/IP client/server in linux application capable to fastly detect ethernet cable disconnection in any condition. So I have activate SO_KEEPALIVE options and set TCP_KEEPCNT, TCP_KEEPIDLE and TCP_KEEPINTVL to 1. When I disconnect ethernet cable I have the following... (5 Replies)
Discussion started by: jeje_clb
5 Replies

11. AIX

How to detect the network cable status with c programming on AIX

Hello, Is there any API or any other approach to detect whether the network cable is connected to the network adapter, say, en0, en1 or en2? The OS is AIX6.1. Thank you. (4 Replies)
Discussion started by: zephyrbj
4 Replies

12. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a... (7 Replies)
Discussion started by: samer.odeh
7 Replies

13. UNIX for Dummies Questions & Answers

question on RJ-45 cable

Hi, Quick question on RJ-45 cable. I ran ethernet cable, this cable is about 200 feet long. I only need 100 feet cable, does the extra length going to hurt in terms of speed or signal? Please advise. Thanks. (3 Replies)
Discussion started by: samnyc
3 Replies

14. Post Here to Contact Site Administrators and Moderators

Thread 2nd page not visible

Hi, I am not able to see second page of my last post, giving me message database corrupted. Please check. (7 Replies)
Discussion started by: learnbash
7 Replies

15. HP-UX

Status of hardware in HpUx

We would like to know a HP Utility or any Unix command that can give the exact status of PCI Gigabit Ethernet cable (lan cable) We had tried to execute lanscan ioscan -fnC lan The status appears to be the same when the cable is plugged & unplugged and also when the lan is disabled &... (5 Replies)
Discussion started by: siva3492
5 Replies