scsi(4) File Formats scsi(4)
NAME
scsi - configuration files for SCSI target drivers
DESCRIPTION
The architecture of the Solaris SCSI subsystem distinguishes two types of device drivers: SCSI target drivers, and SCSI host adapter driv-
ers. Target drivers like sd(7D) and st(7D) manage the device on the other end of the SCSI bus. Host adapter drivers manage the SCSI bus on
behalf of all the devices that share it.
Drivers for host adapters provide a common set of interfaces for target drivers. These interfaces comprise the Sun Common SCSI Architecture
( SCSA) which are documented as part of the Solaris DDI/DKI. See scsi_ifgetcap(9F), scsi_init_pkt(9F), and scsi_transport(9F) for further
details of these, and associated routines.
Depending on the interconnect (transport), SCSI target devices are either self-identifying or rely on driver.conf(4) entries to be recog-
nized by the system. For self-identifying target devices the driver binding is chosen based on the IEEE-1275 like 'compatible' forms of the
target devices. Currently only the Fibre Channel interconnects, fcp(7D), ifp(7D), scsi_vhci(7D), sf(7D), are self-identifying. You must
specify other ipossible interconnects target devices by using the target driver driver.conf(4) configuration files.
Self-Identifying
Host adapter drivers that dynamically create self-identifying target device children establish a "compatible" property on each child. The
"compatible" property is an ordered array of strings, each string is a compatible "form". High precedence forms are defined first. For a
particular device, the highest precedence form that has an established driver alias selects the driver for the device. Driver associations
to compatible forms, called aliases, are administered by way of add_drv(1M), update_drv(1M), and rem_drv(1M) utilities.
The forms for self-identifying SCSI target devices are derived from the SCSI target device's INQUIRY data. A diverse set of forms is
defined, allowing for flexibility in binding.
From the SCSI INQUIRY data, three types of information are extracted: scsi_dtype, flag bits, and SCSI_ASCII vendor product revision.
The scsi_dtype is the first component of most forms. It is represented as two hex digits. For nodes that represent embedded secondary func-
tions, such as an embedded enclosure service or media changer, additional forms are generated that contain the dtype of the secondary func-
tion followed by the dtype of the device in which the secondary function is embedded.
For forms that use flag bits, all applicable flags are concatenated (in alphabetical order) into a single flags string. Removable media is
represented by a flag. For forms that use the SCSI_ASCII INQUIRY vendor, product, and revision fields, a one-way conversion algorithm
translates SCSI_ASCII to a IEEE 1275 compatible string.
It is possible that a device might change the INQUIRY data it returns over time as a result of a device initialization sequence or in
response to out-of-band management. A device node's "compatible" property is based on the INQUIRY data when the device node was created.
The following forms, in high to low precedence order, are defined for SCSI target device nodes.
scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (1 *1&2)
scsiclass,DDEE.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (2 *1)
scsiclass,DDFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (3 *2)
scsiclass,DD.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR(4)
scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP (5 *1&2)
scsiclass,DDEE.vVVVVVVVV.pPPPPPPPPPPPPPPPP (6 *1)
scsiclass,DDFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP (7 *2)
scsiclass,DD.vVVVVVVVV.pPPPPPPPPPPPPPPPP(8)
scsiclass,DDEEFFF (9 *1&2)
scsiclass,DDEE (10 *1)
scsiclass,DDFFF (11 *2)
scsiclass,DD(12)
scsiclass(13)
*1 only produced on a secondary function node
*2 only produced on a node with flags
where:
v
Is the letter v. Denotes the beginning of VVVVVVVV.
VVVVVVVV
Translated scsi_vendor: SCSI standard INQUIRY data "Vendor identification" SCSI_ASCII field (bytes 8-15).
p
Is the letter p. Denotes the beginning of PPPPPPPPPPPPPPPP.
PPPPPPPPPPPPPPPP
Translated scsi_product: SCSI standard INQUIRY data "Product identification" SCSI_ASCII field (bytes 16-31).
r
Is the letter r. Denotes the beginning of RRRR.
RRRR
Translated scsi_revision: SCSI standard INQUIRY data "Product revision level" SCSI_ASCII field (bytes 32-35).
DD
Is a two digit ASCII hexadecimal number. The value of the two digits is based one the SCSI "Peripheral device type" command set associ-
ated with the node. On a primary node this is the scsi_dtype of the primary command set; on a secondary node this is the scsi_dtype
associated with the embedded function command set.
EE
Same encoding used for DD. This form is only generated on secondary function nodes. The DD function is embedded in an EE device.
FFF
Concatenation, in alphabetical order, of the flag characters below. The following flag characters are defined:
R Removable media: Used when scsi_rmb is set
Forms using FFF are only be generated if there are applicable flag characters.
Solaris might create additional compatible forms not described. These forms are for Solaris internal use only. Any additional use of these
forms is discouraged. Future releases of Solaris might not produce these forms.
driver.conf
Configuration files for SCSI target drivers should identify the host adapter driver implicitly using the class keyword to remove any depen-
dency on the particular host adapter involved.
All host adapter drivers of class scsi recognize the following properties:
target Integer-valued SCSI target identifier that this driver claims.
lun Integer-valued SCSI logical unit number ( LUN) that this driver claims.
All SCSI target driver configuration file device definitions must provide target and lun properties. These properties are used to construct
the address part of the device name under /devices.
The SCSI target driver configuration files shipped with Solaris have entries for LUN 0 only. For devices that support other LUNs, such as
some CD changers, the system administrator can edit the driver configuration file to add entries for other LUNs.
EXAMPLES
Example 1: An Example Configuration File for a SCSI Target Driver
The following is an example configuration file for a SCSI target driver called toaster.conf.
#
# Copyright (c) 1992, by Sun Microsystems, Inc.
#
#ident "@(#)toaster.conf 1.2 92/05/12 SMI"
name="toaster" class="scsi" target=4 lun=0;
Add the following lines to sd.conf for a six- CD changer on target 3, with LUNs 0 to 5.
name="sd" class="scsi" target=3 lun=1;
name="sd" class="scsi" target=3 lun=2;
name="sd" class="scsi" target=3 lun=3;
name="sd" class="scsi" target=3 lun=4;
name="sd" class="scsi" target=3 lun=5;
It is not necessary to add the line for LUN 0, as it already exists in the file shipped with Solaris.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWckr |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO
add_drv(1M), rem_drv(1M), update_drv(1M), driver.conf(4), attributes(5), fcp(7D), ifp(7D), scsi_vhci(7D), sd(7D), sf(7D), st(7D),
scsi_ifgetcap(9F), scsi_init_pkt(9F), scsi_transport(9F)
Writing Device Drivers
ANS X3T9.2/82-2 SMALL COMPUTER SYSTEM INTERFACE (SCSI-1)
ANS X3T9.2/375D Small Computer System Interface - 2 (SCSI-2)
ANS X3T10/994D SCSI-3 Architecture Model (SAM)
IEEE 1275 SCSI Target Device Binding
NOTES
With driver.conf(4) configuration, you need to ensure that the target and lun values claimed by your target driver do not conflict with
existing target drivers on the system. For example, if the target is a direct access device, the standard sd.conf file usually makes sd
claim it before any other driver has a chance to probe it.
SunOS 5.10 26 Sep 2004 scsi(4)