Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

my(4) [v7 man page]

MY(4)							   BSD Kernel Interfaces Manual 						     MY(4)

NAME
my -- Myson Technology Ethernet PCI driver SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file: device my Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_my_load="YES" DESCRIPTION
The my driver provides support for various NICs based on the Myson chipset. The Myson chipset is a variant of the DEC Tulip NIC chipset. The driver will work with almost any MII-compliant PHY, thus failure to positively identify the chip is not a fatal error. HARDWARE
The my driver provides support for various NICs based on the Myson chipset. Supported models include: o Myson MTD800 PCI Fast Ethernet chip o Myson MTD803 PCI Fast Ethernet chip o Myson MTD89X PCI Gigabit Ethernet chip SEE ALSO
altq(4), de(4), netintro(4), pci(4), ifconfig(8) HISTORY
The my driver first appeared in FreeBSD 4.6. AUTHORS
The my driver was written by Myson Technology Inc. This manual page was written by Hiten M. Pandya <hmp@FreeBSD.org>. BUGS
The my driver does not support Power Management Events (PME). BSD
March 11, 2007 BSD

Check Out this Related Man Page

MY(4)                                                      BSD Kernel Interfaces Manual                                                      MY(4)

NAME
my -- Myson Technology Ethernet PCI driver SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file: device my Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_my_load="YES" DESCRIPTION
The my driver provides support for various NICs based on the Myson chipset. The Myson chipset is a variant of the DEC Tulip NIC chipset. The driver will work with almost any MII-compliant PHY, thus failure to positively identify the chip is not a fatal error. HARDWARE
The my driver provides support for various NICs based on the Myson chipset. Supported models include: o Myson MTD800 PCI Fast Ethernet chip o Myson MTD803 PCI Fast Ethernet chip o Myson MTD89X PCI Gigabit Ethernet chip SEE ALSO
altq(4), de(4), netintro(4), pci(4), ifconfig(8) HISTORY
The my driver first appeared in FreeBSD 4.6. AUTHORS
The my driver was written by Myson Technology Inc. This manual page was written by Hiten M. Pandya <hmp@FreeBSD.org>. BUGS
The my driver does not support Power Management Events (PME). BSD March 11, 2007 BSD
Man Page

3 More Discussions You Might Find Interesting

1. SCO

intel 845gv chipset accelerated graphic driver

hi friends.i want to embedded intel 845gv chipset accelerated graphic driver to my xi graphic acceleratedx server ver 4.1 on sco unix .can any one help me to send this driver thanks very much. (0 Replies)
Discussion started by: mostafanabavi
0 Replies

2. IP Networking

Networking 2 NICs

Hi all, Host - Ubuntu 12.04 desktop 64bit Virtualizer - Oracle VirtualBox 2 NICs Where can I find relevant document to set up 2 NICs, one for inward bound and another for outward bound, separate channel, both connected to the same router Would following document be appropriate for my... (1 Reply)
Discussion started by: satimis
1 Replies

3. Solaris

Remove unneeded Ethernet devices?

Solaris 10 x86 VM was shipped with four NICs, two each teamed together. We don't want or need. I ifconfig downed e1000g2 and e1000g3 and removed their /etc/hostname.* entries. But the kernel still sees those devices, and I'm not sure how to remove them. They have been removed from the VM... (5 Replies)
Discussion started by: jnojr
5 Replies