DN(4) Kernel Interfaces Manual DN(4)NAME
dn - DN-11 ACU interface
DESCRIPTION
The dn? files are write-only. The permissible codes are:
0-9 dial 0-9
: dial *
; dial #
- 4 second delay for second dial tone
< end-of-number
The entire telephone number must be presented in a single write system call.
It is recommended that an end-of-number code be given even though not all ACU's actually require it.
FILES
/dev/dn0 connected to 801 with dp0
/dev/dn1 not currently connected
/dev/dn2 not currently connected
SEE ALSO dp(4)DN(4)
Check Out this Related Man Page
dialups(4) File Formats dialups(4)NAME
dialups - list of terminal devices requiring a dial-up password
SYNOPSIS
/etc/dialups
DESCRIPTION
dialups is an ASCII file which contains a list of terminal devices that require a dial-up password. A dial-up password is an additional
password required of users who access the computer through a modem or dial-up port. The correct password must be entered before the user
is granted access to the computer. The set of ports that require a dial-up password are listed in the dialups file.
Each entry in the dialups file is a single line of the form:
terminal-device
where
terminal-device The full path name of the terminal device that will require a dial-up password for users accessing the computer
through a modem or dial-up port.
The dialups file should be owned by the root user and the root group. The file should have read and write permissions for the owner (root)
only.
EXAMPLES
Example 1: A sample dialups file.
Here is a sample dialups file:
/dev/term/a
/dev/term/b
/dev/term/c
FILES
/etc/d_passwd dial-up password file
/etc/dialups list of dial-up ports requiring dial-up passwords
SEE ALSO d_passwd(4)SunOS 5.10 4 May 1994 dialups(4)
I'm just looking for really good unix book on programming in all shells, and system adminstrator books, and well as just all around really good books on unix.
I know the "Unix Shell Programming" book that Neo recommends I recently purchased that it is very good.
But when I heard that Neo has... (13 Replies)
I'm just looking for really good unix book on programming in all shells, and system adminstrator books, and well as just all around really good books on unix.
I know the "Unix Shell Programming" book that Neo recommends I recently purchased that it is very good.
But when I heard that Neo has... (13 Replies)
Greetings to all,
I have not been in a unix environment for many years, but I am back.
Question is regarding how to setup or check how it's configured is DNS on a SPARCstation 20 runing SunOS 4.1.4 2 sun4m
I have a DNS server on the network and would like the sun box to use it for it's name... (22 Replies)
Hi there,
I am wondering if by logging in to a unix system, if it is possible to get the IP address of the machine I am connecting FROM.
I know how I can do this using the name server, but is this possible without a host lookup?:confused:
Thanks,
-ghoti (15 Replies)
Ok someone has to be able to help me here.
I have the latest webmin, and i have bind
i have a domain name called
thedigitaldream.co.uk
i have one server, just one as im poor
so the one server is gunna be the dns, email, web and ftp server. Its only for a small site anyway so it will... (16 Replies)
I am running Solaris 2.6 Server on a Sparc 10 and I was wondering how I can manually specify a DNS server to resolve hostnames. Any help will be greatly appreciated.
And also I have created a file in the /etc dir named defaultrouter and added th IP address of my router, but when I ping another... (15 Replies)
I have a installed Redhat Linux v5 on a new HP Pavillon PC. It has a dual boot with Vista. Booting from Vista, I can connect to the internet. However with Redhat I cannot connect to the internet.
I looked at the /etc/resolv.conf file in Redhat and there is no DNS entry there. From where do I... (28 Replies)
Guys,
I have enabled the resolv.conf to be configured with our DNS Network
and it's configured when I ping any hostname in my Network from the server it's giving me the hostname of that machine (witch mean it's working fine )
but I‘m facing slowness in my connection when I rename... (13 Replies)
Discussion started by: ITHelper
13 Replies
9. Post Here to Contact Site Administrators and Moderators
Apparently (at least) 2 of the servers responsible for serving the static images and the JavaScript are down or otherwise unreachable. Affected are www.unix.com and www.unix.com, while www.unix.com is still up. A check on this website confirmed it. Checked as of 2010-06-16 08:11 UTC. (13 Replies)
We are using internal DNS server to relove for internal systems, and the same DNS server resolves any external domains for example yahoo.com
I would like to use openddns to resolve the external domains and put some control.
I looked at the resolve.conf file and it is as follows
search... (13 Replies)
Heyas
Trying to parse a tempfile, but somehow i mess up.
To my understand, this should work...
Plain:
tail -n1 out.tmp
1 81.5M 1 1066k 0 0 359k 0 0:03:52 0:00:02 0:03:50 359k
I want to get the 81.5M, so i'd assume it'll be $2 for awk....
tail -n1 out.tmp | awk... (24 Replies)
I have vmware on my windows PC ( hostname : acer ).
vmware has RHEL 7 ( hostname : rhel7 ) installed recently.
RHEL IP configuration
IP : 192.168.5.128
Netmask : 255.255.255.0
ssh to rhel7 works from acer using putty
resolve.conf
cat /etc/resolv.conf
nameserver 192.168.5.1
host... (12 Replies)