powerd(1M)powerd(1M)NAME
powerd - power manager daemon
SYNOPSIS
/usr/lib/power/powerd [-n]
The powerd daemon is started by pmconfig(1M) to monitor system activity and perform an automatic shutdown using the suspend-resume feature.
When the system is suspended, complete current state is saved on the disk before power is removed. On reboot, the system automatically
starts a resume operation and the system is restored to the same state it was in immediately prior to suspend.
Immediately prior to system shutdown, the daemon notifies syslogd(1M) of the shutdown, which broadcasts a notification.
The following option is supported:
-n No broadcast mode. The daemon silently shuts down the system without notifying syslogd(1M).
/etc/power.conf Power Management configuration information file
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpmu |
+-----------------------------+-----------------------------+
|Interface Stability |Unstable |
+-----------------------------+-----------------------------+
pmconfig(1M), dtpower(1M), syslogd(1M), power.conf(4), attributes(5), cpr(7), pm(7D)
Using Power Management
15 Oct 1999 powerd(1M)
Check Out this Related Man Page
powerd(1M)powerd(1M)NAME
powerd - power manager daemon
SYNOPSIS
/usr/lib/power/powerd [-n]
The powerd daemon is started by pmconfig(1M) to monitor system activity and perform an automatic shutdown using the suspend-resume feature.
When the system is suspended, complete current state is saved on the disk before power is removed. On reboot, the system automatically
starts a resume operation and the system is restored to the same state it was in immediately prior to suspend.
Immediately prior to system shutdown, the daemon notifies syslogd(1M) of the shutdown, which broadcasts a notification.
The following option is supported:
-n No broadcast mode. The daemon silently shuts down the system without notifying syslogd(1M).
/etc/power.conf Power Management configuration information file
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpmu |
+-----------------------------+-----------------------------+
|Interface Stability |Unstable |
+-----------------------------+-----------------------------+
pmconfig(1M), dtpower(1M), syslogd(1M), power.conf(4), attributes(5), cpr(7), pm(7D)
Using Power Management
15 Oct 1999 powerd(1M)
Last night my sister was on the computer and she shut it down by just pressing the power button:mad:.I heard it was never good to shutdown a unix system from the power button(I always do the shutdown -h now), how do I know if the filesystem has been damaged or something like that?:confused: (5 Replies)
after sometime and will not wake up until we reboot the system. It is a DELL 24" LCD connected to a sunblade 1500.
my power.conf file is set like this:
# more /etc/power.conf
# Copyright (c) 1996 - 2001 by Sun Microsystems, Inc.
# All rights reserved.
#
#pragma ident ... (0 Replies)
Hello I'm serving on a ship that has frequent power issues. Currently if we loose power we need to rush around to multiple UNIX machines and login to Sysadmin and power down each machine before we loose our ups. If sysadmin is asleep or not in the space we have some real problems. I would like to... (2 Replies)
Hi,
My HP-Proliant Machine have faced abnormal shutdown due to a power failure.
after the event : "Operating System not found" appears & the system could not load operating system.
O/S: RHEL AS 4 update 2
Software Raid 1+0 were configured.
Facts Gathered:
All mount points are... (1 Reply)
Hello,
I tried searching for the solution on the google...nothing so far...
anyone know anything about this.
Broadcast message from root@pr2serv (tty) at 00:01:04 ...
Cluster Verification detected cluster configuration errors on node pr1serv. Detailed clverify output is available in... (7 Replies)
dears, any one knows how to use linux command to monitor hp server Redhat dual power status? any 1 of power failure then alarm will triggered. (4 Replies)
Hi,
As in Management Modules of IBM it is possible to find out wheather out of dual powersupply , if one goes down.
is it possible to find out in HMC to find out if one power supply goes down of P Series server? if server is remotely
HOw to find out if one power supply of server is down?... (1 Reply)
Hi,
I would like to find out where the system will display the server was shutdown due to power fluctuation.
I have check the command errpt and alog -o -t boot |more but not getting the requred information.
alog -o -t boot command is not showing the time
Time: 9 LEDS: 0x538
invoking... (4 Replies)
Hello Gurus,
Im troubleshooting a server in which it has a netboot partition from a "node0" and there is other system called "host0" . Every time host0 boots it gets by network the image from the n0.
So the thing is that on the n0 , where all the logs are stored from host0, in /var/log/messages... (2 Replies)
I switched on the power to the server. But, the server did not power on i.e., none of the 3 LEDs on the front panel is lighted.
(Power supplies are showing only amber LEDs with "Ready to remove" sign).
I tried to turn on the power supplies via System Controller menu (platform shell), but it... (6 Replies)
the only way we can power off is if we actually press power button on server. Running on HP DL-G4. from root, when we issue command it just returns to root prompt. (1 Reply)