pcmciad(1M)pcmciad(1M)NAME
pcmciad - PCMCIA user daemon
SYNOPSIS
/usr/lib/pcmciad
The PCMCIA user daemon provides user-level services for the PCMCIA nexus driver and PCMCIA card client drivers. There are no user-config-
urable options for this daemon.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpcmcu |
+-----------------------------+-----------------------------+
pcmcia(7D), attributes(5)
pcmciad: can't open /dev/pem: No such file or directory
The user daemon could not communicate with the PCMCIA event management driver.
20 Mar 1995 pcmciad(1M)
Check Out this Related Man Page
AXNET_CS(4) Kernel Interfaces Manual AXNET_CS(4)NAME
axnet_cs - Asix AX88190 chipset PCMCIA Ethernet Driver
SYNOPSIS
insmod axnet_cs.o [pc_debug=n] [irq_list=i,j,...]
DESCRIPTION
Axnet_cs is a driver for PCMCIA ethernet cards based on the Asix AX88190 chipset. These cards are mostly NE2000 compatible but have sev-
eral bugs that are sufficiently tricky to work around that a separate driver was deemed necessary. When this driver is bound to a card, it
allocates the next available ethernet device (eth0..eth#). This device name will be reported in the kernel log file, and passed on to
cardmgr(8).
PARAMETERS
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero
value enables debugging.
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
DIAGNOSTICS
axnet_cs: this is not an AX88190 card!
Indicates that this card is probably a normal NE2000 compatible card, which requires the pcnet_cs driver.
eth#: interrupt(s) dropped!
Indicates that the driver did not receive an interrupt notification for some reason. The driver will poll the card (with a signifi-
cant performance penalty) if the problem persists. The most likely cause is an interrupt conflict and/or host bridge configuration
problem.
AUTHOR
David Hinds - dahinds@users.sourceforge.net
SEE ALSO cardmgr(8), pcmcia(5).
pcmcia-cs 2001/08/17 12:51:58 AXNET_CS(4)
Hello Everyone!
I am a newbie. I'd like to get key lines from a big txt file by Reg Exp, The file is nearly 22MB.
GREP or SED?which may be the best choice,more efficient way?
or any other best practise?
Thank you in advance.
Ever:) (5 Replies)
Hi running aix 6.1
oslevel
6100-07-03-1207
I need to confirm that this cron entry is set properly.
I need it set for every 5 min.
0,5,10,15,20,25,30,35,40,45,50,55 * * * * /path/to/script.sh
it does not appear that it is running every 5 min but it did in the beginning. (4 Replies)
Hey :) I am trying to understand the command goto.
I have some questions regarding the goto manual.
1.What does the underlined part mean?
I'm not allowed to type goto in the shell? But if goto is written into a file everything is okay?
2.So if a part of my file looks like this
...
goto... (8 Replies)
We just found out that the installation of DB/2 on a HACMP- (PowerHA-) Cluster running v7.1.3 is not possible due to a bug in HACMP. DB/2-version was 10.5 but this seems to apply to 10.1 too (and probably other versions as well).
The error message the DB/2-installer issues is something like:
... (2 Replies)
Dear all, will be thankful if you can help on sort command.
My data looks like (tab separated; number of columns 2317; N of rows ~200000):
a b c d V10 V2 V8 V4 V7
xx z y 1000 1 2 0 2 0
tr v m 1001 0 0 1 2 2
rg s ... (7 Replies)
Hi,
I am trying to build python(2.7.9) 64 bit from source on solaris10. Using the below to compile
./configure CFLAGS=-m64 LDFLAGS=-m64
But getting errors like below while executing make
make: Fatal error: Command failed for target `libinstall'
OS info:
isainfo -v
64-bit amd64... (9 Replies)
Hello there
so i have a txt file containing word like "one two three four plus four five six".
I want to save every word in the file into a variable, and then use that variable to generate real numbers and apply the arithmetic value on them.
example: the txt files becomes 123 + 456 and... (10 Replies)
Hello. I am looking for all the necessary packages required to be able to compile libXft.
I tried to compile libXft-2.1.8.2$ and the error message was:
checking for XRENDER... checking for XRENDER... checking for X... no
checking X11/extensions/Xrender.h usability... no
checking... (1 Reply)
Working on a new cybersecurity, dystopian world series and made a short 2 min teaser today.
Cyber Dystopia (720 HD)
https://www.youtube.com/watch?v=g9Ca07J_YC8
If anyone has any ideas for the story, please write out some story lines in the comments and join the production team! (1 Reply)
Hello my friends,
I've come across the weirdest of glitches.
I'm running a simple weather monitor (just temperature) on a Raspbeery Pi 3B (Raspbian Linux 4.14.98-v7+). It has a 3G modem that sends out simple packets to my server at home.
On june 5th I lost remote access to the device.... (1 Reply)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
Hello.
I'm new to bash script and I'm learning the basics by writing some scripts.
Recently a friend of mine asked me if I could try to write a script to him to automate a couple of processes that uses JSON RPCs.
I'll try to explain in few words the workflow just to contextualize the problem.... (48 Replies)
H Forum,
I was thankful in getting help from this post that allowed me to connect to multiple severs at once using here documents to gather data into variables. But I've discovered that the same bash command that works on my RHEL 7 servers do not work on RHEL 6? What's strange about my... (4 Replies)