usb_register_driver(9) [suse man page]

USB_REGISTER_DRIVER(9)						   USB Core APIs					    USB_REGISTER_DRIVER(9)

NAME

       usb_register_driver - register a USB interface driver

SYNOPSIS

       int usb_register_driver(struct usb_driver * new_driver, struct module * owner, const char * mod_name);

ARGUMENTS

       new_driver
	   USB operations for the interface driver

       owner
	   module owner of this driver.

       mod_name
	   module name string

DESCRIPTION

       Registers a USB interface driver with the USB core. The list of unattached interfaces will be rescanned whenever a new driver is added,
       allowing the new driver to attach to any recognized interfaces. Returns a negative error code on failure and 0 on success.

NOTE

       if you want your driver to use the USB major number, you must call usb_register_dev to enable that functionality. This function no longer
       takes care of that.

COPYRIGHT

Kernel Hackers Manual 2.6.					     July 2010						    USB_REGISTER_DRIVER(9)

USB_TEMPLATE(4) 					   BSD Kernel Interfaces Manual 					   USB_TEMPLATE(4)

NAME

     usb_template -- USB templates

SYNOPSIS

     To compile this module into the kernel, place the following line in your kernel configuration file:

	   device usb_template

     To load the module at boot time, place the following line in loader.conf(5):

	   usb_template_load="YES"

DESCRIPTION

     The usb_template module implements various USB templates that are needed when programming an USB device side driver.  A USB template consists
     of an USB device descriptor, one or more USB configuration descriptors, one or more USB interface descriptors, one or more USB endpoint
     descriptors, USB strings and additional USB descriptors.  The USB template module currently has templates for USB Mass Storage, USB CDC Eth-
     ernet and Message Transfer Protocol.  USB templates are currently selected using the "hw.usb.template" sysctl.  The "hw.usb.template" value
     can be changed at any time, but will not have any effect until the USB device has been re-enumerated.

SEE ALSO

     usb(4)

STANDARDS

     The usb_template module complies to the USB 1.0, 2.0 and 3.0 standard.

HISTORY

     The usb_template module was written by Hans Petter Selasky <hselasky@FreeBSD.org>.

BSD
								  March 18, 2014							       BSD