usb_add_hcd(9) [suse man page]

USB_ADD_HCD(9)						       Host Controller APIs						    USB_ADD_HCD(9)

NAME

       usb_add_hcd - finish generic HCD structure initialization and register

SYNOPSIS

       int usb_add_hcd(struct usb_hcd * hcd, unsigned int irqnum, unsigned long irqflags);

ARGUMENTS

       hcd
	   the usb_hcd structure to initialize

       irqnum
	   Interrupt line to allocate

       irqflags
	   Interrupt type flags

FINISH THE REMAINING PARTS OF GENERIC HCD INITIALIZATION

       allocate the buffers of consistent memory, register the bus, request the IRQ line, and call the driver's reset and start routines.

COPYRIGHT

Kernel Hackers Manual 2.6.					     July 2010							    USB_ADD_HCD(9)

REQUEST_THREADED_IRQ(9) 					Hardware Interfaces					   REQUEST_THREADED_IRQ(9)

NAME

       request_threaded_irq - allocate an interrupt line

SYNOPSIS

       int request_threaded_irq(unsigned int irq, irq_handler_t handler, irq_handler_t thread_fn, unsigned long irqflags, const char * devname,
				void * dev_id);

ARGUMENTS

       irq
	   Interrupt line to allocate

       handler
	   Function to be called when the IRQ occurs. Primary handler for threaded interrupts If NULL and thread_fn != NULL the default primary
	   handler is installed

       thread_fn
	   Function called from the irq handler thread If NULL, no irq thread is created

       irqflags
	   Interrupt type flags

       devname
	   An ascii name for the claiming device

       dev_id
	   A cookie passed back to the handler function

DESCRIPTION

       This call allocates interrupt resources and enables the interrupt line and IRQ handling. From the point this call is made your handler
       function may be invoked. Since your handler function must clear any interrupt the board raises, you must take care both to initialise your
       hardware and to set up the interrupt handler in the right order.

       If you want to set up a threaded irq handler for your device then you need to supply handler and thread_fn.  handler ist still called in
       hard interrupt context and has to check whether the interrupt originates from the device. If yes it needs to disable the interrupt on the
       device and return IRQ_WAKE_THREAD which will wake up the handler thread and run thread_fn. This split handler design is necessary to
       support shared interrupts.

       Dev_id must be globally unique. Normally the address of the device data structure is used as the cookie. Since the handler receives this
       value it makes sense to use it.

       If your interrupt is shared you must pass a non NULL dev_id as this is required when freeing the interrupt.

FLAGS

       IRQF_SHARED Interrupt is shared IRQF_DISABLED Disable local interrupts while processing IRQF_SAMPLE_RANDOM The interrupt can be used for
       entropy IRQF_TRIGGER_* Specify active edge(s) or level

COPYRIGHT

Kernel Hackers Manual 2.6.					     July 2010						   REQUEST_THREADED_IRQ(9)