scsi_adjust_queue_depth(9) [suse man page]

SCSI_ADJUST_QUEUE_DE(9) 					  SCSI mid layer					   SCSI_ADJUST_QUEUE_DE(9)

NAME

       scsi_adjust_queue_depth - Let low level drivers change a device's queue depth

SYNOPSIS

       void scsi_adjust_queue_depth(struct scsi_device * sdev, int tagged, int tags);

ARGUMENTS

       sdev
	   SCSI Device in question

       tagged
	   Do we use tagged queueing (non-0) or do we treat this device as an untagged device (0)

       tags
	   Number of tags allowed if tagged queueing enabled, or number of commands the low level driver can queue up in non-tagged mode (as per
	   cmd_per_lun).

RETURNS

       Nothing

LOCK STATUS

       None held on entry

NOTES

       Low level drivers may call this at any time and we will do the right thing depending on whether or not the device is currently active and
       whether or not it even has the command blocks built yet.

AUTHORS

       James Bottomley <James.Bottomley@hansenpartnership.com>
	   Author.

       Rob Landley <rob@landley.net>
	   Author.

COPYRIGHT

Kernel Hackers Manual 2.6.					     July 2010						   SCSI_ADJUST_QUEUE_DE(9)

ADW(4)							   BSD Kernel Interfaces Manual 						    ADW(4)

NAME

     adw -- Advansys PCI 16bit SCSI Host adapter driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device pci
	   device scbus
	   device adw

DESCRIPTION

     This driver provides access to the 16bit SCSI bus connected to the Advanced Systems Products, Inc.  ASC3550 Ultra, and ASC38C0800 Ultra2,
     SCSI Host Adapter chips.  Both chips support, synchronous transfers (20MHz and 40MHz max respectively), 16bit transfers, tagged queueing, and
     up to 253 concurrent SCSI transactions.

     Per target configuration performed in the AdvanceWare menu, which is accessible at boot, is honored by this driver.  This includes synchro-
     nous/asynchronous transfers, maximum synchronous negotiation rate, wide transfers, disconnection, tagged queueing, and the host adapter's
     SCSI ID.  The global setting for the maximum number of tagged transactions allowed per target is not honored as the CAM SCSI system will
     automatically determine the maximum number of tags a device can receive as well as guarantee fair resource allocation among devices.

HARDWARE

     The adw driver supports SCSI controllers including:

     o	 AdvanSys ABP940UW/ABP3940UW
     o	 AdvanSys ABP950UW
     o	 AdvanSys ABP970UW
     o	 AdvanSys ABP3940U2W
     o	 AdvanSys ABP3950U2W

SEE ALSO

     adv(4), cd(4), da(4), sa(4), scsi(4)

HISTORY

     The adw driver appeared in FreeBSD 3.0.

AUTHORS

     The adw driver was ported by Justin T. Gibbs from the Linux driver written by Bob Frey of Advanced System Products, Inc.  Many thanks to
     AdvanSys for providing the original driver under a suitable license for use in FreeBSD.

BSD
								   July 14, 2004							       BSD