scsi_6_lba_len(9) [suse man page]

SCSI_6_LBA_LEN(9)					  libata SCSI translation/emulat					 SCSI_6_LBA_LEN(9)

NAME

       scsi_6_lba_len - Get LBA and transfer length

SYNOPSIS

       void scsi_6_lba_len(const u8 * cdb, u64 * plba, u32 * plen);

ARGUMENTS

       cdb
	   SCSI command to translate

       plba
	   the LBA

       plen
	   the transfer length

DESCRIPTION

       Calculate LBA and transfer length for 6-byte commands.

AUTHOR

       Jeff Garzik
	   Author.

COPYRIGHT

Kernel Hackers Manual 2.6.					     July 2010							 SCSI_6_LBA_LEN(9)

SG_REFERRALS(8) 						     SG3_UTILS							   SG_REFERRALS(8)

NAME

       sg_referrals - send the SCSI REPORT REFERRALS command

SYNOPSIS

       sg_referrals [--help] [--hex] [--lba=LBA] [--maxlen=LEN] [--one-segment] [--raw] [--verbose] [--version] DEVICE

DESCRIPTION

       Send the SCSI REPORT REFERRALS command to the DEVICE and outputs the response. This command was introduced in (draft) SBC-3 revision 24 and
       devices that support referrals should support this command.

       The default action is to decode the response for all user data segment referral descriptors. The amount of output can  be  reduced  by  the
       --lba and --one-segment options.

OPTIONS

       Arguments to long options are mandatory for short options as well.

       -h, --help
	      output the usage message then exit.

       -H, --hex
	      output response to this command in ASCII hex.

       -l, --lba=LBA
	      where  LBA  is  the Logical Block Address (LBA) in the first user data segment the DEVICE should report the referrals parameter data
	      for.

       -m, --maxlen=LEN
	      where LEN is the (maximum) response length in bytes. It is placed in the cdb's "allocation length" field. If not given then  256	is
	      used. 256 is enough space for the response header and user data segment descriptors.

       -s, --one-segment
	      report the user data segment of the segment spefified by the LBA parameter only.

       -r, --raw
	      output response in binary (to stdout).

       -v, --verbose
	      increase the level of verbosity, (i.e. debug output). Additional output caused by this option is sent to stderr.

       -V, --version
	      print the version string and then exit.

NOTES

       For a discussion of referrals see section 4.25 of sbc3r25.pdf at http://www.t10.org (or the corresponding section of a later draft).

EXIT STATUS

       The exit status of sg_referrals is 0 when it is successful. Otherwise see the sg3_utils(8) man page.

AUTHORS

       Written by Douglas Gilbert and Hannes Reinecke.

REPORTING BUGS

       Report bugs to <dgilbert at interlog dot com>.

COPYRIGHT

       Copyright (C) 2009-2010 Douglas Gilbert and Hannes Reinecke
       This  software  is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
       POSE.

SEE ALSO

       sg_vpd(8)

sg3_utils-1.30							   November 2010						   SG_REFERRALS(8)