I2O_IOP_REMOVE(9) Message-based devices I2O_IOP_REMOVE(9)NAME
i2o_iop_remove - Remove the I2O controller from the I2O core
SYNOPSIS
void i2o_iop_remove(struct i2o_controller * c);
ARGUMENTS
c
I2O controller
DESCRIPTION
Remove the I2O controller from the I2O core. If devices are attached to the controller remove these also and finally reset the controller.
COPYRIGHT Kernel Hackers Manual 2.6. July 2010 I2O_IOP_REMOVE(9)
Check Out this Related Man Page
ICP(4) BSD Kernel Interfaces Manual ICP(4)NAME
icp -- ICP-Vortex and Intel Storage RAID driver
SYNOPSIS
icp* at pci? dev ? function ?
ld* at icp? unit ?
icpsp* at icp? unit ?
scsibus* at icpsp?
DESCRIPTION
The icp driver provides support for the newer (post 1997) ICP-Vortex GDT and Intel Storage RAID controllers.
The ld driver provides access to logical devices (disk arrays) presented by the controller. The icpsp driver provides direct access to other
SCSI devices attached to the controller, such as tape or CD-ROM drives.
DIAGNOSTICS
pci_mem_find: expected mem type 00000000, found 00000002
This message may be displayed during autoconfiguration if the controller's memory is mapped below 1MB in physical address
space. This can be disabled either through changing a setting in the controller's BIOS utility, or changing the position of a
jumper on the board. See your controller's documentation for more information.
SEE ALSO intro(4), ld(4), scsi(4)HISTORY
The icp driver first appeared in NetBSD 1.6, and was based on the FreeBSD and OpenBSD drivers of the same name.
BUGS
ISA & EISA front-ends and a management interface are needed.
Older PCI boards are not yet supported.
BSD April 20, 2002 BSD
Hi all,
I want to create a new user and grant him ONLY transfer files access to a specific directory where he can only upload and read the files. He should be restricted to this activity only.
Regards (6 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hi,
Last 2 weeks I have searched many forums and i haven't found the answer for the question:
How to get all command output to Putty title?
Needed it for other programs to know when some jobs on a server is done and is it done right or wrong. Plink stdout and stdin wasn't working, i used many... (1 Reply)
anyone have any idea how do to this with auth_attr?
I suspect if I grant him
solaris.device.:RO::Device Allocation::help=DevAllocHeader.html
that will work but I'm unsure. Just looking for a second opinion. (10 Replies)
I am looking for a stable, reliable system to replace my current Windows systems in the home. These are simple systems that I purchased from the local Big Box store.
I have heard many good things about Unix and it's various children and it sounds like a good option to me. I have worked... (2 Replies)
We have a lot of scripts using cut as :
cut -c 0-8 --works for cut (GNU coreutils) 5.97, but does not work for cut (GNU coreutils) 8.4.
Gives error -
cut: fields and positions are numbered from 1
Try `cut --help' for more information.
The position needs to start with 1 for later... (6 Replies)
I've got a problem with a proxy configuration. We have an LDAP group that lists all users who are authorised to use the proxy to FTP (usually Filezilla) out to the world, and by implication those not in the group should be denied. My users are delighted that this has been enabled and those that... (9 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
Hello for all,
I am testing the behavior of a 32 bit application running on Solaris 5.10 (SPARC), and realize it reaches 4GB of memory and then crashes.
It doesn't matter the amount of used memory as application is intended to perform many transactions; rather, what I want to achieve is to... (2 Replies)