SYSTEMD-TIMESYNCD.SERVICE(8) systemd-timesyncd.service SYSTEMD-TIMESYNCD.SERVICE(8)NAME
systemd-timesyncd.service, systemd-timesyncd - Network Time Synchronization
SYNOPSIS
systemd-timesyncd.service
/lib/systemd/systemd-timesyncd
DESCRIPTION
systemd-timesyncd is a system service that may be used to synchronize the local system clock with a remote Network Time Protocol server. It
also saves the local time to disk every time the clock has been synchronized and uses this to possibly advance the system realtime clock on
subsequent reboots to ensure it monotonically advances even if the system lacks a battery-buffered RTC chip.
The systemd-timesyncd service specifically implements only SNTP. This minimalistic service will set the system clock for large offsets or
slowly adjust it for smaller deltas. More complex use cases are not covered by systemd-timesyncd.
The NTP servers contacted are determined from the global settings in timesyncd.conf(5), the per-link static settings in .network files, and
the per-link dynamic settings received over DHCP. See systemd.network(5) for more details.
timedatectl(1)'s set-ntp command may be used to enable and start, or disable and stop this service.
FILES
/var/lib/systemd/timesync/clock
This file contains the timestamp of the last successful synchronization.
SEE ALSO systemd(1), timesyncd.conf(5), systemd.network(5), systemd-networkd.service(8), timedatectl(1), localtime(5), hwclock(8)systemd 237SYSTEMD-TIMESYNCD.SERVICE(8)
Check Out this Related Man Page
SYSTEMD-NETWORKD.SERVICE(8) systemd-networkd.service SYSTEMD-NETWORKD.SERVICE(8)NAME
systemd-networkd.service, systemd-networkd - Network manager
SYNOPSIS
systemd-networkd.service
/lib/systemd/systemd-networkd
DESCRIPTION
systemd-networkd is a system service that manages networks. It detects and configures network devices as they appear, as well as creating
virtual network devices.
To configure low-level link settings independently of networks, see systemd.link(5).
systemd-networkd will create network devices based on the configuration in systemd.netdev(5) files, respecting the [Match] sections in
those files.
systemd-networkd will manage network addresses and routes for any link for which it finds a .network file with an appropriate [Match]
section, see systemd.network(5). For those links, it will flush existing network addresses and routes when bringing up the device. Any
links not matched by one of the .network files will be ignored. It is also possible to explicitly tell systemd-networkd to ignore a link by
using Unmanaged=yes option, see systemd.network(5).
When systemd-networkd exits, it generally leaves existing network devices and configuration intact. This makes it possible to transition
from the initrams and to restart the service without breaking connectivity. This also means that when configuration is updated and
systemd-networkd is restarted, netdev interfaces for which configuration was removed will not be dropped, and may need to be cleaned up
manually.
CONFIGURATION FILES
The configuration files are read from the files located in the system network directory /lib/systemd/network, the volatile runtime network
directory /run/systemd/network and the local administration network directory /etc/systemd/network.
Networks are configured in .network files, see systemd.network(5), and virtual network devices are configured in .netdev files, see
systemd.netdev(5).
SEE ALSO systemd(1), systemd.link(5), systemd.network(5), systemd.netdev(5), systemd-networkd-wait-online.service(8)systemd 237SYSTEMD-NETWORKD.SERVICE(8)
Hi all,
I want to create a new user and grant him ONLY transfer files access to a specific directory where he can only upload and read the files. He should be restricted to this activity only.
Regards (6 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hi,
Last 2 weeks I have searched many forums and i haven't found the answer for the question:
How to get all command output to Putty title?
Needed it for other programs to know when some jobs on a server is done and is it done right or wrong. Plink stdout and stdin wasn't working, i used many... (1 Reply)
anyone have any idea how do to this with auth_attr?
I suspect if I grant him
solaris.device.:RO::Device Allocation::help=DevAllocHeader.html
that will work but I'm unsure. Just looking for a second opinion. (10 Replies)
I am looking for a stable, reliable system to replace my current Windows systems in the home. These are simple systems that I purchased from the local Big Box store.
I have heard many good things about Unix and it's various children and it sounds like a good option to me. I have worked... (2 Replies)
We have a lot of scripts using cut as :
cut -c 0-8 --works for cut (GNU coreutils) 5.97, but does not work for cut (GNU coreutils) 8.4.
Gives error -
cut: fields and positions are numbered from 1
Try `cut --help' for more information.
The position needs to start with 1 for later... (6 Replies)
I've got a problem with a proxy configuration. We have an LDAP group that lists all users who are authorised to use the proxy to FTP (usually Filezilla) out to the world, and by implication those not in the group should be denied. My users are delighted that this has been enabled and those that... (9 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
Hello for all,
I am testing the behavior of a 32 bit application running on Solaris 5.10 (SPARC), and realize it reaches 4GB of memory and then crashes.
It doesn't matter the amount of used memory as application is intended to perform many transactions; rather, what I want to achieve is to... (2 Replies)