Query: smp_rep_general
OS: suse
Section: 8
Format: Original Unix Latex Style Formatted with HTML and a Horizontal Scroll Bar
SMP_REP_GENERAL(8) SMP_UTILS SMP_REP_GENERAL(8)NAMEsmp_rep_general - invoke REPORT GENERAL SMP functionSYNOPSISsmp_rep_general [--change_report] [--help] [--hex] [--interface=PARAMS] [--raw] [--sa=SAS_ADDR] [--verbose] [--version] SMP_DEVICE[,N]DESCRIPTIONSends a SAS Management Protocol (SMP) REPORT GENERAL request function to a SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR. Depending on the interface, the SAS_ADDR may be deduced from the SMP_DEVICE. With one interface there is one SMP_DEVICE per machine so the SMP_DEVICE,N syntax is needed to differentiate between HBAs if there are multiple present.OPTIONSMandatory arguments to long options are mandatory for short options as well. -c, --change_report reports (prints to stdout) the value of the expander change count field from the response. The value is printed in decimal and is obtained from a 16 bit field. -h, --help output the usage message then exit. -H, --hex output the response in hexadecimal. -I, --interface=PARAMS interface specific parameters. In this case "interface" refers to the path through the operating system to the SMP initiator. See the smp_utils man page for more information. -r, --raw send the response to stdout in binary. All error messages are sent to stderr. -s, --sa=SAS_ADDR specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if the SMP_DEVICE has the target's SAS address within it. The SAS_ADDR is in decimal but most SAS addresses are shown in hexadecimal. To give a number in hexadecimal either prefix it with '0x' or put a trailing 'h' on it. -v, --verbose increase the verbosity of the output. Can be used multiple times -V, --version print the version string and then exit.CONFORMING TOThe SMP REPORT GENERAL function was introduced in SAS-1, with small additions in SAS-1.1 . There have been a large number of additions in SAS-2 .AUTHORSWritten by Douglas Gilbert.REPORTING BUGSReport bugs to <dgilbert at interlog dot com>.COPYRIGHTCopyright (C) 2006-2008 Douglas Gilbert This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR- POSE.SEE ALSOsmp_utils, smp_discover(smp_utils) smp_utils-0.93 January 2008 SMP_REP_GENERAL(8)
Related Man Pages |
---|
smp_rep_general(8) - debian |
smp_rep_manufacturer(8) - debian |
smp_zone_activate(8) - debian |
smp_rep_manufacturer(8) - suse |
smp_rep_phy_err_log(8) - suse |
Similar Topics in the Unix Linux Community |
---|
Stop a SAS job |
SAS Tuning |
to pick up the Return Code ( RC) from the mailx command and return it to SAS uisng 's |
Remove SAS comments using UNIX |
SAS dataset to CSV |