Apache::AuthNetLDAP(3) User Contributed Perl Documentation Apache::AuthNetLDAP(3)
NAME
Apache::AuthNetLDAP - mod_perl module that uses the Net::LDAP module for user authentication for Apache
SYNOPSIS
AuthName "LDAP Test Auth"
AuthType Basic
#only set the next two if you need to bind as a user for searching
#PerlSetVar BindDN "uid=user1,ou=people,o=acme.com" #optional
#PerlSetVar BindPWD "password" #optional
PerlSetVar BaseDN "ou=people,o=acme.com"
PerlSetVar LDAPServer ldap.acme.com
PerlSetVar LDAPPort 389
#PerlSetVar UIDAttr uid
PerlSetVar UIDAttr mail
#PerlSetVar AlternatePWAttribute alternateAttribute
#PerlSetVar SearchScope base | one | sub # default is sub
#PerlSetVar LDAPFilter "(&(course=CSA)(class=A))" #optional
# Set if you want to encrypt communication with LDAP server
# and avoid sending clear text passwords over the network
PerlSetVar UseStartTLS yes | no
# Set if you want to allow an alternate method of authentication
PerlSetVar AllowAlternateAuth yes | no
require valid-user
PerlAuthenHandler Apache::AuthNetLDAP
DESCRIPTION
This module authenticates users via LDAP using the Net::LDAP module. This module is Graham Barr's "pure" Perl LDAP API.
It also uses all of the same parameters as the Apache::AuthPerLDAP, but I have added four extra parameters.
The parameters are:
PerlSetVar BindDN
Used to set initial LDAP user.
PerlSetVar BindPWD
Used to set initial LDAP password.
PerlSetVar BaseDN
This sets the search base used when looking up a user in an LDAP server.
PerlSetVar LDAPServer
This is the hostname of the LDAP server you wish to use.
PerlSetVar LDAPPort
This is the port the LDAP server is listening on.
PerlSetVar UIDAttr
The attribute used to lookup the user.
PerlSetVar AlternatePWAttribute
The an alternate attribute with which the $password will be tested. This allows you to test with another attribute, instead of just
trying to bind the userdn and password to the ldap server.
If this option is used, then a BindDN and BindPWD must be used for the initial bind.
PerlSetVar AllowAlternateAuth
This attribute allows you to set an alternative method of authentication (Basically, this allows you to mix authentication methods, if
you don't have
all users in the LDAP database). It does this by returning a DECLINE and checking
for the next handler, which could be another authentication, such as Apache-AuthenNTLM or basic authentication.
PerlSetVar SearchScope
Optional. Can be base, one or sub. Default is sub. Determines the scope of the LDAP search.
PerlSetVar LDAPFilter
This is an LDAP filter, as defined in RFC 2254. This is optional. If provided, it will be ANDed with the filter that verifies the
UID. For example, if you have these set:
PerlSetVar UIDAttr uid
PerlSetVar LDAPFilter "(&(course=41300)(year=3)(classCode=Y))"
and a user authenticates with the username "nicku" then the following filter will be generated to search for the entry to authenticate
against:
(&(&(course=41300)(year=3)(classCode=Y))(uid=nicku))
This will then allow nicku access only if nicku's LDAP entry has the attribute course equal to 41300, the attribute year equal to 3,
and attribute classCode equal to Y. And of course, if the password is correct. This may be useful for restricting access to a group
of users in a large directory, e.g., at a university.
PerlSetVar UseStartTLS
Optional; can be yes or no. If yes, will fail unless can start a TLS encrypted connection to the LDAP server before sending passwords
over the network. Note that this requires that the optional module IO::Socket::SSL is installed; this depends on Net::SSLeay, which
depends on openssl. Of course, the LDAP server must support Start TLS also.
Uses for UIDAttr
For example if you set the UIDAttr to uid, and a user enters the UID nicku, then the LDAP search filter will lookup a user using the search
filter:
(uid=nicku)
Normally you will use the uid attribute, but you may want (need) to use a different attribute depending on your LDAP server or to
synchronize with different applications. For example some versions of Novell's LDAP servers that I've encountered stored the user's login
name in the cn attribute (a really bad idea). And the Netscape Address Book uses a user's email address as the login id.
INSTALLATION
It's a pretty straightforward install if you already have mod_perl and Net::LDAP already installed.
After you have unpacked the distribution type:
perl Makefile.PL
make
make test
make install
Then in your httpd.conf file or .htaccess file, in either a <Directory> or <Location> section put:
AuthName "LDAP Test Auth"
AuthType Basic
#only set the next two if you need to bind as a user for searching
#PerlSetVar BindDN "uid=user1,ou=people,o=acme.com" #optional
#PerlSetVar BindPWD "password" #optional
PerlSetVar BaseDN "ou=people,o=acme.com"
PerlSetVar LDAPServer ldap.acme.com
PerlSetVar LDAPPort 389
PerlSetVar UIDAttr uid
PerlSetVar UseStartTLS yes # Assuming you installed IO::Socket::SSL, etc.
# Set if you want base or one level scope for search:
PerlSetVar SearchScope one # default is sub
# Set if you want to limit access to a subset of users:
#PerlSetVar LDAPFilter "(&(course=CSA)(class=A))" #optional
# Set if you want to allow an alternate method of authentication
PerlSetVar AllowAlternateAuth yes | no
require valid-user
PerlAuthenHandler Apache::AuthNetLDAP
If you don't have mod_perl or Net::LDAP installed on your system, then the Makefile will prompt you to install each of these modules. At
this time, March 8, 2004, you may say yes to Net::LDAP, and yes for mod_perl, if you are installing this module on apache 1.3. (The reason
being, that mod_perl 2 is under development, and is not ready for download from CPAN at this time. Therefore, your install of mod_perl, as
initiated with the Makefile.PL, will fail. If you are going to install mod_perl 2, which is needed to work with Apache2, you will need to
download it from: http://perl.apache.org/download/index.html. (Installation is beyond the scope of this document, but you can find
documentation at: http://perl.apache.org/docs/2.0/user/install/install.html#Installing_mod_perl_from_Source.) Otherwise installation is
the same.
You may also notice that the Makefile.PL will ask you to install ExtUtils::AutoInstall. This is necessary for the installation process to
automatically install any of the dependencies that you are prompted for. You may choose to install the module, or not.
HOMEPAGE
Module Home: http://search.cpan.org/author/SPEEVES/
AUTHOR
Mark Wilcox mewilcox@unt.edu and
Shannon Eric Peevey speeves@unt.edu
SEE ALSO
Net::LDAP
ACKNOWLEDGMENTS
Graham Barr for writing Net::LDAP module.
Henrik Strom for writing the Apache::AuthPerLDAP module which I derived this from.
The O'Reilly "Programming Modules for Apache with Perl and C" (http://www.modperl.com).
Mark Wilcox for being the "Godfather" of Central Web Support... ;)
Stas Beckman for having the patience to answer my many questions.
Everyone else on the modperl mailing list... You know who you are :)
WARRANTY AND LICENSE
You can distribute and modify in accordance to the same license as Perl. Though I would like to know how you are using the module or if you
are using the module at all.
Like most of the stuff on the 'net, I got this copy to work for me without destroying mankind, you're mileage may vary.
perl v5.12.1 2010-07-05 Apache::AuthNetLDAP(3)