ddi_io_rep_put16(9f) [sunos man page]
ddi_io_rep_put8(9F) Kernel Functions for Drivers ddi_io_rep_put8(9F) NAME
ddi_io_rep_put8, ddi_io_rep_put16, ddi_io_rep_put32, ddi_io_rep_putw, ddi_io_rep_putl, ddi_io_rep_putb - write multiple data to the mapped device register in I/O space SYNOPSIS
#include <sys/ddi.h> #include <sys/sunddi.h> void ddi_io_rep_put8(ddi_acc_handle_t handle, uint8_t *host_addr, uin8_t *dev_addr, size_t repcount); void ddi_io_rep_put16(ddi_acc_handle_t handle, uint16_t *host_addr, uin16_t *dev_addr, size_t repcount); void ddi_io_rep_put32(ddi_acc_handle_t handle, uint32_t *host_addr, uin32_t *dev_addr, size_t repcount); INTERFACE LEVEL
Solaris DDI specific (Solaris DDI). PARAMETERS
handle Data access handle returned from setup calls, such as ddi_regs_map_setup(9F). host_addr Base host address. dev_addr Base device address. repcount Number of data accesses to perform. DESCRIPTION
These routines generate multiple writes to the device address, dev_address, in I/O space. repcount data is copied from the host address, host_addr, to the device address, dev_addr. For each input datum, the ddi_io_rep_put8(), ddi_io_rep_put16(), and ddi_io_rep_put32() func- tions write 8 bits, 16 bits, and 32 bits of data, respectively, to the device address. host_addr must be aligned to the datum boundary described by the function. Each individual datum will automatically be translated to maintain a consistent view between the host and the device based on the encoded information in the data access handle. The translation may involve byte-swapping if the host and the device have incompatible endian char- acteristics. CONTEXT
These functions can be called from user, kernel, or interrupt context. SEE ALSO
isa(4), ddi_io_get8(9F), ddi_io_put8(9F), ddi_io_rep_get8(9F), ddi_regs_map_setup(9F), ddi_device_acc_attr(9S) NOTES
For drivers using these functions, it may not be easy to maintain a single source to support devices with multiple bus versions. For example, devices may offer I/O space in ISA bus (see isa(4)) but memory space only in PCI local bus. This is especially true in instruction set architectures such as x86 where accesses to the memory and I/O space are different. The functions described in this manual page previously used symbolic names which specified their data access size; the function names have been changed so they now specify a fixed-width data size. See the following table for the new name equivalents: +--------------------------------------------------------------+ |Previous Name New Name | |ddi_io_rep_putb ddi_io_rep_put8 | |ddi_io_rep_putw ddi_io_rep_put16 | |ddi_io_rep_putl ddi_io_rep_put32 | +--------------------------------------------------------------+ SunOS 5.10 30 Sep 1996 ddi_io_rep_put8(9F)
Check Out this Related Man Page
ddi_io_rep_put8(9F) Kernel Functions for Drivers ddi_io_rep_put8(9F) NAME
ddi_io_rep_put8, ddi_io_rep_put16, ddi_io_rep_put32, ddi_io_rep_putb, ddi_io_rep_putl, ddi_io_rep_putw - write multiple data to the mapped device register in I/O space SYNOPSIS
#include <sys/ddi.h> #include <sys/sunddi.h> void ddi_io_rep_put8(ddi_acc_handle_t handle, uint8_t *host_addr, uin8_t *dev_addr, size_t repcount); void ddi_io_rep_put16(ddi_acc_handle_t handle, uint16_t *host_addr, uin16_t *dev_addr, size_t repcount); void ddi_io_rep_put32(ddi_acc_handle_t handle, uint32_t *host_addr, uin32_t *dev_addr, size_t repcount); INTERFACE LEVEL
Solaris DDI specific (Solaris DDI). The ddi_io_rep_put8(), ddi_io_rep_put16(), ddi_io_rep_put32(), ddi_io_rep_putb(), ddi_io_rep_putl(), and ddi_io_rep_putw() functions are obsolete. The ddi_rep_put8(9F) function replaces ddi_io_rep_put8(). The ddi_rep_put16(9F) function replaces ddi_io_rep_put16(). The ddi_rep_put32(9F) function replaces ddi_io_rep_put32(). The ddi_rep_put8(9F) function replaces ddi_io_rep_putb(). The ddi_rep_put32(9F) function replaces ddi_io_rep_putl(). The ddi_rep_put16(9F) function replaces ddi_io_rep_putw(). PARAMETERS
handle Data access handle returned from setup calls, such as ddi_regs_map_setup(9F). host_addr Base host address. dev_addr Base device address. repcount Number of data accesses to perform. DESCRIPTION
These routines generate multiple writes to the device address, dev_address, in I/O space. repcount data is copied from the host address, host_addr, to the device address, dev_addr. For each input datum, the ddi_io_rep_put8(), ddi_io_rep_put16(), and ddi_io_rep_put32() func- tions write 8 bits, 16 bits, and 32 bits of data, respectively, to the device address. host_addr must be aligned to the datum boundary described by the function. Each individual datum will automatically be translated to maintain a consistent view between the host and the device based on the encoded information in the data access handle. The translation may involve byte-swapping if the host and the device have incompatible endian char- acteristics. CONTEXT
These functions can be called from user, kernel, or interrupt context. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Interface Stability |Obsolete | +-----------------------------+-----------------------------+ SEE ALSO
isa(4), ddi_io_get8(9F), ddi_io_put8(9F), ddi_io_rep_get8(9F), ddi_regs_map_setup(9F), ddi_rep_put8(9F), ddi_rep_put16(9F), ddi_rep_put32(9F), ddi_device_acc_attr(9S) SunOS 5.11 1 Nov 2005 ddi_io_rep_put8(9F)