BESTFCOM(8) NUT Manual BESTFCOM(8)NAME
bestfcom - Driver for Best Power Fortress/Ferrups
NOTE
This man page only documents the hardware-specific features of the bestfcom driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
Best Power Fortress/Ferrups implementing the Fortress UPS Protocol (f-command set).
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
AUTHORS
Kent Polk (bestfcom)
Andreas Wrede, John Stone (bestuferrups)
Grant Taylor (bestfort)
Russell Kroll (bestups)
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 BESTFCOM(8)
Check Out this Related Man Page
LIEBERT(8) NUT Manual LIEBERT(8)NAME
liebert - Driver for Liebert contact-closure UPS equipment
NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)
Hi, i have a file like this:
A1
kdfjdljfdkljfdlf
A2
lfjdlfkjddkjf
A3
***no hit***
A4
ldjfldjfdk
A5
***no hit***
A6
jldfjdlfjdlkfjd
I want to remove the lines "***no hit*** and their above line to get an output file like this: (11 Replies)
Not my story, but interesting enough to be worth posting here IMHO. (Original is here)
The following is the 500-mile email story in the form it originally appeared, in a post to sage-members on Sun, 24 Nov 2002.:
From trey@sage.org Fri Nov 29 18:00:49 2002
Date: Sun, 24 Nov 2002 21:03:02... (3 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hi gurus,
I have a weird requirement. I need to convert the number to english lecture.
I have 1.2 ....19 numbers
I need to convert to first second third fourth, fifth, sixth...
Is there any way convert it using unix command?
thanks in advance. (8 Replies)
Hi,
Humorous UNIX Commands shows a fun way of using echo and dc to sort of obfuscate a string.
% echo 'sasb3135071790101768542287578439snlbxq'|dc
GET A LIFE!
I am just wanting to know if there is a way to sort of use dc and echo to print out an obfuscated/garbled string instead... (3 Replies)
Hi All,
Having recently started a new job, a Data Center Migration in fact I have been tasked with looking at some of the older Solaris boxes when I came across this little gem.
nismas# uname -a
SunOS nismas 5.5.1 Generic_103640-27 sun4u sparc SUNW,Ultra-1
nismas# uptime
10:37am up 2900... (2 Replies)
For any SunOS 5.XX release, it appears prior to the "login:" prompt (as if a "uname" command is run).
Would anyone know where that initial display of SunOS release comes from upon a remote login and how I can stop if from displaying?
Thank you (4 Replies)
I am trying to remove each line in which $2 is FP or RFP. I believe the below will remove one instance but not both. Thank you :).
file
12
123 FP
11
10 RFP
awk
awk -F'\t' '
$2 != "FP"' file
desired output
12
11 (6 Replies)
Hi everybody,
Which Unix base OS have best performance for HOST virtualization?
I tested SmartOS but it needs another OS to connect remotely!
Thanks in advance. (11 Replies)
I have this file:
>ID1
AA
>ID2
TTTTTT
>ID-3
AAAAAAAAA
>ID4
TTTTTTGGAGATCAGTAGCAGATGACAG-GGGGG-TGCACCCC
Add I am trying to use this script to output sequences longer than 15 characters:
sed -r '/^>/N;{/^.{,15}$/d}'
The desire output would be this:
>ID4... (8 Replies)
Hi,
I am having contents in a file like below,
cat testfile
rpool/swap
rpool/swap14
rpool/swap2
rpool/swap3
I want to sort the above contents like,
rpool/swap
rpool/swap2
rpool/swap3
rpool/swap14
I have tried in this way, (7 Replies)
Morning All
So, I am starting looking into the world of UNIX for a new job (luckily not my primary function!) and I am looking to get stared. Like anything I seem to learn best by trying things out first in an environment but I have a key question:
Currently I use Oracle VirtualBox, can... (8 Replies)