pcmcia(7D)pcmcia(7D)NAME
pcmcia - PCMCIA nexus driver
The PCMCIA nexus driver supports PCMCIA card client device drivers. There are no user-configurable options for this driver.
/kernel/misc/pcmcia pcmcia driver
pcmciad(1M)
28 Feb 2005 pcmcia(7D)
Check Out this Related Man Page
AXNET_CS(4) Kernel Interfaces Manual AXNET_CS(4)NAME
axnet_cs - Asix AX88190 chipset PCMCIA Ethernet Driver
SYNOPSIS
insmod axnet_cs.o [pc_debug=n] [irq_list=i,j,...]
DESCRIPTION
Axnet_cs is a driver for PCMCIA ethernet cards based on the Asix AX88190 chipset. These cards are mostly NE2000 compatible but have sev-
eral bugs that are sufficiently tricky to work around that a separate driver was deemed necessary. When this driver is bound to a card, it
allocates the next available ethernet device (eth0..eth#). This device name will be reported in the kernel log file, and passed on to
cardmgr(8).
PARAMETERS
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero
value enables debugging.
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
DIAGNOSTICS
axnet_cs: this is not an AX88190 card!
Indicates that this card is probably a normal NE2000 compatible card, which requires the pcnet_cs driver.
eth#: interrupt(s) dropped!
Indicates that the driver did not receive an interrupt notification for some reason. The driver will poll the card (with a signifi-
cant performance penalty) if the problem persists. The most likely cause is an interrupt conflict and/or host bridge configuration
problem.
AUTHOR
David Hinds - dahinds@users.sourceforge.net
SEE ALSO cardmgr(8), pcmcia(5).
pcmcia-cs 2001/08/17 12:51:58 AXNET_CS(4)
We are installing a PrismII chipset wireless PCMCIA card with a new 2.4.9 linux kernel. The card is a D-Link DWL-650. The 2.4.9 kernel uses the orinoco_cs.o driver.
Anyone running this configuration?
The 2.4.9 Linux kernel has built in PCMCIA support and the README says it supports the... (1 Reply)
Hi,
I have a Dell Inspiron 4000 that I am using to run Redhat Linux 7.1.
This machine had 128Mb of RAM in it, and I upgraded to 512Mb.
Since this, the PCMCIA cards have disappeared from the system running under Linux, although they still work under windows and the file "/var/lib/pcmcia/stab"... (1 Reply)
ENV: linux Version: Mandrake 8.1, PCMCIA card: longshine lcs-8534TB.
(supported according the PCMCIA docs)
laptop is P-II lifetec
/etc/sysconfig/pcmcia:
PCMCIA=yes
PCIC=i82365 ( found via probe -m )
PCIC_OPTS="cs_irq=11 pci_irq_list=11,11 do_scan=0" ( you see i want to force irq 11 )... (3 Replies)
I currently have an IBM Thinkpad with a built in 56k modem. RedHat 7.1 does not recognize my internal modem. I used a Xircom Ethernet 56 + 100 card. Linux knows the card is there. However, I have been unable to set it up. Please help is possible. (1 Reply)
I am using an IBM 390E laptop with a built-in LT modem which RH 7.3 does not notice. I would like to know if there are any pcmcia modems that are supported by version 7.3. If so, what is the propduct and where can I purchase it? Thanks!!
adrienb:confused: (2 Replies)
Hey all,
I've bought a few bits from Belkin who seem quite happy to support FreeBSD! Last time I bought a UPS from them and it's still going well :D
I saw this on their website that the 16bit PCMCIA card was supported under FreeBSD:
http://www.belkin.com/network/F5D5020.html
I went to my... (0 Replies)
Hi,
I justed manged to install Solaris 8 on my Laptop, the only problem I have got is that It does not find my PCMCIA card. I need it to find my card so I can connect the Laptop to my LAN.
I am using a 3Com LAN card model number is 3CCE589ET. This card work with Linux with no problems.
... (2 Replies)
Hi
I recently installed Mandrake 9 on my laptop. It has 2 PCMCIA slots, and in one of them I usually keep one of my network cards (ones an Accton 2216, the other a Surecom EP-427). Under mandrake when my computer started up (and went into runlevel 5) it attempted to start 'network' and then... (2 Replies)
Hi,
I keep getting an error when I insert a pcm200 card on my laptop.
The Error:
Card type 32-bit cardbus is unsupported
I am using freebsd 4.11
thanks
lucky (2 Replies)
Hi there. I have an old laptop Toshiba Tecra 510 (P1, 147MB RAM, 30GB HDD) and I installed FreeBSD 7.2.
For networking I have a PCMCIA card for wired network. The problem is that I cannot start and run PCMCIA
As I know in Linux there is a tool pcmciautils for this pc-cards, but in FreeBSD I have... (1 Reply)
How to create a user account on a Linux desktop machine with restrictions on connecting to the LAN, WAN, PCMCIA ports, Firewire, CDROM and generally any user controllable output options?
I have the task to set up a machine for users working with sensitive data that should not be leaving the... (1 Reply)