grbeep(7d) Devices grbeep(7d)NAME
grbeep - Platform-dependent beep driver for SMBus-based hardware
SYNOPSIS
beep@unit-address
DESCRIPTION
The grbeep driver generates beeps on platforms (including Sun Blade 100, 150, 1500, 2500) that use SMBbus-based registers and USB key-
boards. When the KIOCCMD ioctl is issued to the USB keyboard module (see usbkbm(7M)) with command KBD_CMD_BELL/KBD_CMD_NOBELL, usbkbm(7M)
passes the request to the grbeep driver to turn the beep on and off, respectively.
FILES
/platform/sun4u/kernel/drv/sparcv9/grbeep
64-bit ELF kernel driver
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |SMBus-based SPARC |
+-----------------------------+-----------------------------+
|Availability |SUNWcarx.u |
+-----------------------------+-----------------------------+
SEE ALSO kbd(1), attributes(5), bbc_beep(7D), kb(7M), usbkbm(7M)
Writing Device Drivers
DIAGNOSTICS
None
SunOS 5.10 18 Dec 2001 grbeep(7d)
Check Out this Related Man Page
bbc_beep(7D) Devices bbc_beep(7D)NAME
bbc_beep - Platform-dependent Beep driver for BBC-based hardware.
SYNOPSIS
beep@unit-address
DESCRIPTION
The bbc_beep driver generates beeps on platforms (including Sun Blade 1000) that use BBC-based registers and USB keyboards. When the KIOC-
CMD ioctl is issued to the USB keyboard module (see usbkbm(7M)) with command KBD_CMD_BELL/KBD_CMD_NOBELL, usbkbm(7M) passes the request to
the bbc_beep driver to turn the beep on and off, respectively.
FILES
/platform/sun4u/kernel/drv/sparcv9/bbc_beep
64-bit ELF kernel driver
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |BBC-based SPARC |
+-----------------------------+-----------------------------+
|Availability |SUNWcarx.u |
+-----------------------------+-----------------------------+
SEE ALSO kbd(1), attributes(5), grbeep(7D), kb(7M), usbkbm(7M)
Writing Device Drivers
DIAGNOSTICS
None
SunOS 5.10 18 Dec 2001 bbc_beep(7D)
hiho,
who has an idea how i can tell my shell that it should not beep on errors or when i'm using the TAB in bash to complete
noone needs to know when i make mistakes ;-)
solaris 9 (SPARC)
bash 2.05
thx a lot
Pre฿y (1 Reply)
I would like to upgrade the memory in my Sun Blade 150 workstation. In reading through Sun's Blade 150 DIMM Installation Guide, it indicates that the memory must be "certified by Sun for the Sun Blade 150 system."
Does anyone know if any SDRAM, PC133 CL=2 Unbuffered ECC 133MHz 3.3V ... (2 Replies)
I need to know how to turn off the beep in my unix environment. I tried with the Common Desktop Environment on solaris but it didn't work. I used to know the environment variable to set but I have forgotten it. (1 Reply)
Hi, i would like a help with this problem.
i have the following situation:
4 workstations SUNs:
SunOS porsche 5.8 Generic_117350-18 sun4u sparc SUNW,Sun-Blade-100
SunOS jaguar 5.8 Generic_108528-18 sun4u sparc SUNW,Sun-Blade-100
SunOS mercedes 5.8 Generic_117350-18 sun4u sparc... (2 Replies)
I just got done configuring a Linksys Wireless - G Broadband Router. Model WRT54G. My PC is running XP and I have a Sun Blade 100 running Solaris 9 connected to the router. My PC is obviously getting out to the net :cool: , but I cant get my Solaris Netscape on the Sun Blade to get out on the... (3 Replies)
Hi,
I am attempting to configure my ethernet interface on a Sun Blade 1500. I am testing out my network interface my connecting a crossover cable from my blade to a windows box. I would like to assign an ip address of 10.0.0.2 to "bge0" and netmask of "255.0.0.0". I have typed the following:
... (1 Reply)
Hi guys,
I am a new member here. This is my first post.
I try to purchase some new Blade 2500 for the
company. However, the vendor suggests me to get Blade 2000 instead. The vendor said he has many problems
with new Silver Blade 2500's. Has anyone here had
simlar experience with blade 2500?... (4 Replies)
Hi, I am new to UNIX. I have a Sun Blade 150 worksation. I used a Dell monitor and Dell keyboard as input and output devices. However, workstation always told me that keyboard couldn't be found. I used Dell keyboard with USB and Dell keyboard with series connector. It all didn't work. Please help... (10 Replies)
I have a Sun Blade 2500 with Sun O.S Release 5.8
Open Windows Version 6.4.1 and two graphics card.
One Radeon Model No 855 and another PGX64
I want to know how could I Install the PGX64. (1 Reply)
I'm not familiar with this particular machine and it's baffling me. For those that are familar with the workstation, allow me to paint a picture. If you were looking down on the machine (open) you would see the main board and then a riser board. On the left side of the riser board are jacks... (1 Reply)
hi,
I am trying following TELNET script on SunOS terminal01 5.8 Generic_108528-27 sun4u sparc SUNW,Sun-Blade-100.
I am stuck up due to an Error I cannot fix out. please can some one here can help me out. I must be thankful.
code:
Error
output for perl -V
THX and... (3 Replies)
We had to replace a hard drive in one of our Sun Blade 150s, but now it hangs during the Jumpstart. It will show 1 or 2 Timeout for ARP/RARP messages and then start the spinning numbers. It always stops at 2ae00 and just hangs there.
We have 1 combined jumpstart server and it is also our NIS+... (5 Replies)
Hi everyone!
I have an odd question - If a sun workstation (Blade 2000) boots up into a login prompt, is there any chance that it could have hardware issues? Or once it gets that far is it 100% working.
I cant play with it before buying, so was interested to see if anyone could shed some... (4 Replies)
i am using
SunOS ReportServer 5.8 Generic_108528-29 sun4u sparc SUNW,Sun-Blade-2500
and i just wrote a simple script like below:
#!/sbin/sh
df -k
exit 0
when i run it i get response as below
check.sh: not found
please what am i doing wrong (7 Replies)
Hello All,
I am new to the forum so forgive me for any mistakes. I have a question. I have been doing alot of reading about how to get a supportable operating system on my sunblade 2500. I also want to use it for Xorg. I have been having trouble getting the sun XVR drivers working... (2 Replies)