aac(7D) Devices aac(7D)NAME
aac - SCSI HBA driver for Adaptec AdvancedRAID Controller
DESCRIPTION
The aac plain SCSI host bus adapter driver is a SCSA-compliant nexus driver that supports the Adaptec 2200S/ 2120S SCSI RAID card and Dell
PERC 3Di SCSI RAID controller.
The aac driver ports from FreeBSD and only supports basic RAID disk I/O functions.
DRIVER CONFIGURATION
There are no user configurable parameters available. Please configure your hardware through BIOS.
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |x86 |
+-----------------------------+-----------------------------+
FILES
/kernel/drv/aac
32-bit ELF kernel module
/kernel/drv/aac.conf
Configuration file. (Contains no user-configurable options).
SEE ALSO prtconf(1M), attributes(5), scsi_hba_attach(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_device(9S), scsi_inquiry(9S), scsi_pkt(9S)
Small Computer System Interface-2 (SCSI-2)
SunOS 5.10 18 Aug 2004 aac(7D)
Check Out this Related Man Page
amr(7D) Devices amr(7D)NAME
amr - SCSI HBA driver for Dell PERC 3/DC, 4/SC, 4/DC and 4/DI
DESCRIPTION
The amr plain SCSI host bus adapter driver is a SCSA-compliant nexus driver that supports the Dell PERC 3DC/4SC/4DC/4Di RAID devices.
The amr driver ports from FreeBSD and only supports basic RAID disk I/O functions.
DRIVER CONFIGURATION
There are no user configurable parameters available. Please configure your hardware through BIOS.
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |x86 |
+-----------------------------+-----------------------------+
FILES
/kernel/drv/amr 32-bit ELF kernel module.
/kernel/drv/amd64/amr 64-bit kernel module (x86 only).
/kernel/drv/amr.conf Driver configuration file (contains no user-configurable options).
SEE ALSO prtconf(1M), attributes(5), lsimega(7D), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S),
scsi_device(9S), scsi_pkt(9S)
Small Computer System Interface-2 (SCSI-2)
SunOS 5.11 20 April 2005 amr(7D)
Hi,
I have installed a SCSI Controller onto an HPUX 10.20b and I don't have any driver files for it when I check in Sys Admin. Do I need to update the kernel? I am not sure how to get the computer to recognize this controller... any suggestions?
Thanks (2 Replies)
Hello all,
I'm new to RAID and would like to know if anyone had works with Dell PERC3 RAID controller. I'm having a problem install the driver on REDHAT AS 3.0. All the drivers from dell only support up to AS 2.1. Does anyone know if the controller is from LSI Logic. If so which mode?
I'm... (4 Replies)
Hi Am kind of new in Unix. I am used to installing SCO Unix 5.0.5 (very old i guess) on a server with SCSI RAID 0. at the boot prompt during installation I type
restart link=ipsraid Srom=wd(0,0,0,0). But the problem now is that i want to install on a server with no RAID SCSI disk. what command do... (3 Replies)
:confused: Hello everybody,
i am totally new to unix, i want to learn unix. i have a server with pIII, 256 mb RAM, two SCSI disk w/o RAID controller.and one IDE CD-ROM Drive.
i heard SCO installs on intel platform. what steps should i take for installing SCO on this machine? can anybody help me... (1 Reply)
Hi
I am currently looking for a BTLD for an VERY old DPT PM2044UW RAID Controller to be used on a Sco Openserver 5.0.4 installtion. Have searched the net and can not find one.
Anyone out there know where I can download this from? (3 Replies)
I seem to be having a driver issue installing a PCI SCSI card. Any ideas where I can track these down.. I can't seem to find them on the OS install disk. I'm using AIX 5.3.
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently... (7 Replies)
Disk cloning
I had an external SCSI master disk that I used to clone to an identical external SCSI disk because the other SCSI disk would become corrupted. My original Master became corrupted so I used one of the other to good disk to copy back to the master. Unfortunately the new master needs... (1 Reply)
I'am new to this and want to learn more.
I would like to load SCO 5.0.7 on a dell poweredge 6350 with quad Xeon processors 3 drives with 2 meg mem, SCSI 7890, 7860 .
the problem comes when ths software does its system check, confus
it gets to a point, and shows F Bladinit , then stops and shuts... (1 Reply)
Hi All,
Need some help.............
I have a Solaris 10 installed on x86 PC.
I need some help on how to configure my HP Q1553A tape drive StorageWorks DAT 40
It is connected via Adaptec PCI SCSI card.
I tried to check the drive using commands
Command Output
ls... (1 Reply)
Dear Friends,
I need to configure T5240 with Internal SAS RAID HBA(SG-XPCIESAS-R-INT-Z).. T5240 uses 8 hard disks... From the documents of RAID card I have found that I need to create a jump start server to include three packages SUNWaac, StorMan, SUNWgccruntime if Im using solaris10 5/08...
... (5 Replies)
how can I make interfacing with the SCSI controller on linux system using C language to send or recieve data via this SCSI port like I made with serial port and socket ???:confused:
how can I deal with this port ??:rolleyes:
how can I get its address or its device name ???:eek:
thanks for help. (2 Replies)
I tried searching a bit. After a lot of confusion, I'm just going to be blunt. Can anyone recommended study materials for the SCSA exam? I don't want to cheat with testkings, I just want Study Material Recommendations..
Thank you. (1 Reply)
Hi everyone,
I am trying to write an if statement that will split a file if it is over 1 million records/lines into files with say 900,000 records and then rename
those files without the aaa, aab, aac format that splitting normally does and into a specific naming convention. For instance, if... (2 Replies)
I have a known good external SCSI HD running SCO UNIX OpenServer 5.0.7. I decided that I wanted to be able to run this drive on another computer, so I bought the same SCSI card as before (LSI) and then attempted to boot on the other system. The bootup process hung with the error F painit. I've... (13 Replies)