SYSTEMD-TIMESYNCD.SERVICE(8) systemd-timesyncd.service SYSTEMD-TIMESYNCD.SERVICE(8)NAME
systemd-timesyncd.service, systemd-timesyncd - Network Time Synchronization
SYNOPSIS
systemd-timesyncd.service
/lib/systemd/systemd-timesyncd
DESCRIPTION
systemd-timesyncd is a system service that may be used to synchronize the local system clock with a remote Network Time Protocol server. It
also saves the local time to disk every time the clock has been synchronized and uses this to possibly advance the system realtime clock on
subsequent reboots to ensure it monotonically advances even if the system lacks a battery-buffered RTC chip.
The systemd-timesyncd service specifically implements only SNTP. This minimalistic service will set the system clock for large offsets or
slowly adjust it for smaller deltas. More complex use cases are not covered by systemd-timesyncd.
The NTP servers contacted are determined from the global settings in timesyncd.conf(5), the per-link static settings in .network files, and
the per-link dynamic settings received over DHCP. See systemd.network(5) for more details.
timedatectl(1)'s set-ntp command may be used to enable and start, or disable and stop this service.
FILES
/var/lib/systemd/timesync/clock
This file contains the timestamp of the last successful synchronization.
SEE ALSO systemd(1), timesyncd.conf(5), systemd.network(5), systemd-networkd.service(8), timedatectl(1), localtime(5), hwclock(8)systemd 237SYSTEMD-TIMESYNCD.SERVICE(8)
Check Out this Related Man Page
SYSTEMD-NETWORKD.SERVICE(8) systemd-networkd.service SYSTEMD-NETWORKD.SERVICE(8)NAME
systemd-networkd.service, systemd-networkd - Network manager
SYNOPSIS
systemd-networkd.service
/lib/systemd/systemd-networkd
DESCRIPTION
systemd-networkd is a system service that manages networks. It detects and configures network devices as they appear, as well as creating
virtual network devices.
To configure low-level link settings independently of networks, see systemd.link(5).
systemd-networkd will create network devices based on the configuration in systemd.netdev(5) files, respecting the [Match] sections in
those files.
systemd-networkd will manage network addresses and routes for any link for which it finds a .network file with an appropriate [Match]
section, see systemd.network(5). For those links, it will flush existing network addresses and routes when bringing up the device. Any
links not matched by one of the .network files will be ignored. It is also possible to explicitly tell systemd-networkd to ignore a link by
using Unmanaged=yes option, see systemd.network(5).
When systemd-networkd exits, it generally leaves existing network devices and configuration intact. This makes it possible to transition
from the initrams and to restart the service without breaking connectivity. This also means that when configuration is updated and
systemd-networkd is restarted, netdev interfaces for which configuration was removed will not be dropped, and may need to be cleaned up
manually.
CONFIGURATION FILES
The configuration files are read from the files located in the system network directory /lib/systemd/network, the volatile runtime network
directory /run/systemd/network and the local administration network directory /etc/systemd/network.
Networks are configured in .network files, see systemd.network(5), and virtual network devices are configured in .netdev files, see
systemd.netdev(5).
SEE ALSO systemd(1), systemd.link(5), systemd.network(5), systemd.netdev(5), systemd-networkd-wait-online.service(8)systemd 237SYSTEMD-NETWORKD.SERVICE(8)
I need to use bash to convert sentences where all words start with a small letter into one where all words start with a capital letter.
So that a string like:
are utilities ready for hurricane sandy
becomes:
Are Utilities Ready For Hurricane Sandy (10 Replies)
Hi
I am new to this forum.
Any please help me to capture ctrl x and ctrl y via a bash script.
and please tell me how to clear the prompt via bash script
BR
Ramukumar M (4 Replies)
I have an Oracle Linux 7.1 vsphere host built. It's be preconfigured with our security configurations.
What I would like to do is unconfigure this host. Then set the host to do firstboot --reconfigure.
how do I do that using /etc/sysconfig/firstboot?
I've tried setting
... (10 Replies)
i know from the command line, the symbol $_ is used to get the last command that was run.
however, id like to replicate this within a script.
meaning, how do i do something like this:
#!/bin/sh
ps -ef | egrep talling
StoreThisLastCommandA=$_
awk '/error/ {print $3}' /tmp/test... (5 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Quite an obscure question I think.
We have a rebuild process for remote sites that allows us to PXE rebuild a till (actually a PC with a touch screen and various fancy bits) running CentOS. The current CentOS5 tills work just fine with a tar image restore and some personalisation. Sadly,... (4 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
Hi Folks,
I feel that I should be posting this in the Unix for Dummies Forum and will probably wish I'd created an account and done just that - but here goes anyway.
I have two identical servers both Dell R430's both running RedHat Enterprise Server 7.4 and the same kernel, both have the same... (16 Replies)
Hi,
What is installation package and how to create it?
When we run:
in AIX:
installp package1
or
in Linux
rpm -ivh mypackage
What is package1 or mypackage in the abov examples and how to create them and deploy them?
I hope my question is clear enough.
Thank you (2 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
After the success of the jq - tool for parsing and manipulating JSON-Data someone wrote a tool called yq, which aims to be the same for YAML, what jq is for JSON. Seems to work fine. I'll definitely give it a chance in future.
Example YAML-File:
--- !ruby/object:Puppet::Node::Facts
... (1 Reply)