HP(8) Network UPS Tools (NUT) HP(8)NAME
hp - Driver for HP Powertrust UPS equipment
NOTE
This man page only documents the hardware-specific features of the hp driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver should recognize the A2997A and A2941A models.
EXTRA ARGUMENTS
This driver supports an optional setting in the ups.conf(5):
shutdown=type
Set the type of shutdown to use. The only recognized value is "halt", which makes the UPS halt instead of restart.
AUTHOR
Richard Muratti <rick@ccoz.com>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/
NUT mailing list archives and information: http://lists.exploits.org/
Wed Oct 16 2002 HP(8)
Check Out this Related Man Page
TRIPPLITESU(8) NUT Manual TRIPPLITESU(8)NAME
tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment
NOTE
This man page only documents the hardware-specific features of the tripplitesu driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports the Tripp Lite SmartOnline family (via the serial port).
EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5):
lowbatt=num
Set the low battery warning threshold in percent at which shutdown is initiated by upsmon(8). By default, the UPS may not report low
battery until there are only a few seconds left. Common values are around 25--30.
AUTHOR
Allan N. Hessenflow <allanh@kallisti.com>
SEE ALSO
The core driver:
nutupsdrv(8)
Other drivers for Tripp-Lite hardware:
tripplite(8), tripplite_usb(8), usbhid-ups(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 TRIPPLITESU(8)
Hi,
I do have three scripts. Whcih inserts records into a table using sqlldr, creating some reprot files etc. The first script will call the second and then the second will call the third. When I run my first script from the shell prompt, all my operation are completed successfully. If I do... (23 Replies)
When I'm running a few statements through mysql console, they are working just fine but when I'm trying to write some logic in php and trying to execute it, its awfully slow.. Its perhaps performing, 10 queries in 20 seconds... :( Why is this happening?
My table structures are:
Name:... (23 Replies)
Hi Guys,
I have been trying to resolve a printing problem but nothing works out .
I have an Epson LQ 680 (dot matrix printer) . I need to print a file . The paper length should be 34 .Left margin should be 5. I have tried the following things after researching from the man pages.
pr -t... (24 Replies)
Hi All
I have a problem, I wonder if you can help me sort it out:
I have the following entry in the cron:
00 1,13 * * * /home/report/opn_amt_gestores_credito.ksh > opn_amt_gestores_credito.log
But the entry only runs at 01:07
I have stopped the cron deamon, and started, but it still... (39 Replies)
Good Day,
I've been trying to create a bootable recovery disk with no success. I've used the command ./make_recovery -A -d /dev/rmt/1m and get the command HP-UX System Recovery returned, and after about a minute an error is returned:
/var: write failed, file system is full... (26 Replies)
I am trying to write to a serial port and capture the reponse in a file -
adduser ethan dialout
The user `ethan' is already a member of `dialout'
root@meow:/home/ethan# ls -l /dev/ttyS0
crw-rw-r-- 1 ethan dialout 4, 64 Oct 7 20:55 /dev/ttyS0
$fh1 = fopen("/dev/ttyS0", "w+");... (74 Replies)
Hi all,
I have 3 servers, rx2600, rx2600, and rx2660.
I have another x86 server running on Suse, and create a shared folder named /public
From 1 of the rx2600 server I can mount that shared folder :
intaqa:/>mount 10.1.2.82:/public /bkup
intaqa:/>cd /bkup
But from 2 others server I... (29 Replies)