FOOMATIC-GETPJLOPTIONS(8) System Manager's Manual FOOMATIC-GETPJLOPTIONS(8)NAME
foomatic-getpjloptions - <put a short description here>
SYNOPSIS
foomatic-getpjloptionsdevice
foomatic-getpjloptionshostname port
DESCRIPTION
foomatic-getpjloptions Reads the PJL options from local (parallel, USB, serial, ...) or remote (only socket, LPD is not bi-directional)
printers to standard output. The output can be piped into foomatic-addpjloptions to add options to the database.
Options
device where a local printer is connected, e.g. /dev/lp0, /dev/usb/lp0. Have your parallel port in EPP/bi-directional mode (see your
BIOS settings).
hostname Host name or IP of a network printer (HP JetDirect, Socket, ...)
port Port on which your network printer listens.
EXIT STATUS
foomatic-getpjloptions returns ???
AUTHOR
Manfred Wassmann <manolo@NCC-1701.B.Shuttle.de> for the foomatic project using output from the associated binary.
BUGS
Uni-directional protocols as remote LPD are not supported..
Foomatic Project 2001-05-07 FOOMATIC-GETPJLOPTIONS(8)
Check Out this Related Man Page
FOOMATIC-GETPJLOPTIONS(8) System Manager's Manual FOOMATIC-GETPJLOPTIONS(8)NAME
foomatic-getpjloptions - <put a short description here>
SYNOPSIS
foomatic-getpjloptions device
foomatic-getpjloptions hostname port
DESCRIPTION
foomatic-getpjloptions Sends a set of PJL commands and reads back the PJL options and status from a printer over a network connection or
device bidirectional interface such as parallel, USB, serial. printers to standard output. The output can be piped into foomatic-addpjlop-
tions to add options to the database.
Options
device The interface to which a local printer is connected, e.g. /dev/lp0, /dev/usb/lp0, /dev/tty00, etc. For a parallel port, you must
have bidirectional support enabled at the BIOS level and the parallel port driver must support the bidirectional mode. Check
your parallel port BIOS settings for EPP/bi-directional mode.
hostname Host name or IP address of a network printer (HP JetDirect, DLINK, etc.).
port Port on which your network printer listens for socket (Appsocket) connections. Most common ports are 9100 (JetDirect), 10000
(DLINK). Usually you can configure the port via a configuration interface.
EXIT STATUS
foomatic-getpjloptions returns ???
AUTHOR
Manfred Wassmann <manolo@NCC-1701.B.Shuttle.de> for the foomatic project using output from the associated binary. Modified by Patrick Pow-
ell <papowell at lprng.com> to provide betters support for network printers, error messages, and remove CR and FF from output.
WARNINGS
Uni-directional protocols as remote LPD are not supported as no status is returned. Some network print servers which attach to a printer
parallel port do not support bidirectional mode.
Foomatic Project 2001-05-07 FOOMATIC-GETPJLOPTIONS(8)
I need to use bash to convert sentences where all words start with a small letter into one where all words start with a capital letter.
So that a string like:
are utilities ready for hurricane sandy
becomes:
Are Utilities Ready For Hurricane Sandy (10 Replies)
Hi
I am new to this forum.
Any please help me to capture ctrl x and ctrl y via a bash script.
and please tell me how to clear the prompt via bash script
BR
Ramukumar M (4 Replies)
I have an Oracle Linux 7.1 vsphere host built. It's be preconfigured with our security configurations.
What I would like to do is unconfigure this host. Then set the host to do firstboot --reconfigure.
how do I do that using /etc/sysconfig/firstboot?
I've tried setting
... (10 Replies)
i know from the command line, the symbol $_ is used to get the last command that was run.
however, id like to replicate this within a script.
meaning, how do i do something like this:
#!/bin/sh
ps -ef | egrep talling
StoreThisLastCommandA=$_
awk '/error/ {print $3}' /tmp/test... (5 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Quite an obscure question I think.
We have a rebuild process for remote sites that allows us to PXE rebuild a till (actually a PC with a touch screen and various fancy bits) running CentOS. The current CentOS5 tills work just fine with a tar image restore and some personalisation. Sadly,... (4 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
Hi Folks,
I feel that I should be posting this in the Unix for Dummies Forum and will probably wish I'd created an account and done just that - but here goes anyway.
I have two identical servers both Dell R430's both running RedHat Enterprise Server 7.4 and the same kernel, both have the same... (16 Replies)
Hi,
What is installation package and how to create it?
When we run:
in AIX:
installp package1
or
in Linux
rpm -ivh mypackage
What is package1 or mypackage in the abov examples and how to create them and deploy them?
I hope my question is clear enough.
Thank you (2 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
After the success of the jq - tool for parsing and manipulating JSON-Data someone wrote a tool called yq, which aims to be the same for YAML, what jq is for JSON. Seems to work fine. I'll definitely give it a chance in future.
Example YAML-File:
--- !ruby/object:Puppet::Node::Facts
... (1 Reply)